Wireless Charger User Manual
Product Diagram Compatible with all Qi-enabled mobile devices. Instructions 1. Connect the USB charge cable to USB wall adaptor(not included) or your computer.
2. Connect the USB cable to the micro USB port of the wireless charger. 3. Place charger on level surface with charging area face up(as shown) 4. Place your phone on the wireless charger.Make sure the phone is centered on the charging area.
light up automatically to show status with different colors: Red:Standby mode. Green:Fast charging,which requires both a 9V adaptor and 2A USB fast charging cable. Blue:Normal charging,or fully charged. *Once temperature of battery becomes too high,charging speed will slow down, then color turns from green to blue. Package contents: Wireless Charger USB Cable User Manual Product Specification Input:DC 5V/2.0A 9V/1.67A Output:5W/7.5W/10W(MAX) Conversion rate:≥72% Transmission distance:≤8mm Attention: 1.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.