User's Manual Part 2

Connecting to External Cabling
To prevent damage to the device, connect all cabling and accessories
before powering up the device.
Connect USB Cabling
The PM-522 have two USB ports for connecting USB devices, such as a digital camera,
scanner, printer, modem, and mouse. The USB ports support USB 2.0 or USB 3.0 devices.
1. Open the I/O cover. See “Removing the I/O Cover” on page 22.
2. Connect to USB device via USB cable.
Figure 23. Connect USB Cabling
Connect Ethernet Cabling
The PM-522 provide mini USB to RJ45 dougle for connecting Ethernet.
Use a shielded cable is required to maintain emissions and susceptibility
compliance.
1. Open the I/O cover. See “Removing the I/O Cover” on page 22.
2. Connect the mini USB to RJ45 dongle to micro USB port on the PM-522.
3. Connect LAN cable to mini USB to RJ45 dongle.
Figure 24. Connect Mini USB to RJ45 Dongle