User Instructions

Vegetation Clearing

Animal Trail

Game

Motion Detector

triggered by game

LED indicator from

motion detector

signal on receiver

clipped to hunter’s

visor flashes

Hunter readies firearm

or bow before animal appears

“TripWire” Portable Wireless Motion Detector

Wireless signal sent

PAGE 1
“TripWire” Portable Wireless Motion Detector 1 Animal Trail Game 2 Motion Detector triggered by game 4 5 Wireless signal sent LED indicator from motion detector signal on receiver clipped to hunter’s visor flashes Hunter readies firearm or bow before animal appears Vegetation Clearing 3
PAGE 2
Tripwire Prototype Instructions 1. There is no on/off switch. The motion detector and receiver are on when the battery is inserted and should last between 48-72 depending on use. The transmitter is water resistant. The receiver fob is not in the prototype. 4. Insert a CR2032 battery into the battery holder on the circuit board by inserting the edge of the battery into the copper lip first and then pressing down on the middle of the battery to snap it in. Snap the fob case back together: 2.