Parts List/Tune Up Info

MORLAB
SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.
FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China
Tel: [phone]
Fax: [phone]
Http://www.morlab.cn
E-mail: [e-mail]
REPORT No.：SZ19080162S01
Maximum Power Tune-up Tolerance
This device is a LTE SMARTPHONE (Model name: RG170, FCC ID: ZLE-RG170), description of
Tune-up Tolerance:
1、 Per KDB 447498 D01v06, the maximum output power channel is used for SAR testing and for
further SAR test reduction.
2、 The EUT was connected to Base Station R&S CMW500/MT8820C referred to the Setup
Configuration. For the maximum power, it was established between EUT and Base Station with
following setting:
1) For GSM/GPRS testing, the MS TX Level was set 5 for low frequency bands and 0 for high
frequency bands.
2) For WCDMA testing, Power Ctrl Mode = All Up bits, and the transmitted maximum output
power was recorded.
3) For LTE testing, Power Ctrl Mode = All 1, and the transmitted maximum output power was
recorded.
Maximum Power Tune-up Tolerance:
Technology/Band
Mode
Target Power and Tolerance
(dBm)
GSM 850
GSM
31.0±1.0 dBm
GPRS 1Tx slot
31.0±1.0 dBm
GPRS 2Tx slot
30.5±1.0 dBm
GPRS 3Tx slot
28.5±1.0 dBm
GPRS 4Tx slot
27.5±1.0 dBm
EDGE 1Tx slot
30.0±1.0 dBm
EDGE 2Tx slot
29.0±1.0 dBm
EDGE 3Tx slot
26.5±1.0 dBm
EDGE 4Tx slot
25.0±1.0 dBm
GSM 1900
GSM
28.5±1.0 dBm
GPRS 1Tx slot
28.5±1.0 dBm
GPRS 2Tx slot
28.0±1.0 dBm
GPRS 3Tx slot
26.0±1.0 dBm
GPRS 4Tx slot
25.0±1.0 dBm
EDGE 1Tx slot
25.0±1.0 dBm
EDGE 2Tx slot
24.0±1.0 dBm