High-End Base Guide for RTX745x Installation & Configuration Network Deployment Operation & Management Technical Reference Document Version 1.0 © May-2020 RTX A/S, Denmark RTX745x GUIDE 1.
Trademarks RTX and the combinations of its logo thereof are trademarks of RTX A/S, Denmark. Other product names used in this publication are for identification purposes and maybe the trademarks of their respective companies. Disclaimer The contents of this document are provided about RTX products. RTX makes no representations with respect to completeness or accuracy of the contents of this publication and reserves the right to make changes to product descriptions, usage, etc., at any time without notice.
Table of Contents High-End Base Guide for ..................................................................................................................................................... 1 RTX745x .............................................................................................................................................................................. 1 1 2 3 4 5 6 About This Document ...............................................................................................
6.3 Table summary of the features ....................................................................................................................... 16 General features ......................................................................................................................................... 16 Base features .............................................................................................................................................. 16 7 Regulatory compliances..........
1 About This Document This document describes the configuration, management, operation and maintenance of the RTX745x headset base which is part of the range of the DECT system. For customer specific modes, please refer to specific customer agreements. 1.1 Audience This guide is intended for everyday users. Furthermore, network administrators, IT support and anyone who wishes to gain knowledge on the fundamental features of the RTX745x base, can also benefit from this material. 1.
1.7 Document History REVISION 1.0 AUTHOR DKO ISSUE DATE 15.05.2020 COMMENTS First release 1.8 What is new What new features have been added. VERSION V1.0 FEATURE First release 1.9 Documentation Feedback We always strive to produce the best and we also value your comments and suggestions about our documentation. If you have any comments about this guide, please enter them through the Feedback link on the RTX website. We will use your feedback to improve the documentation. RTX745x GUIDE 1.
2 Package overview Prior to opening, examine the shipping package for evidence of physical damage. If there is proof of mishandling prior to opening, you must report it to the relevant support center of the regional representative or operator. 2.1 Content Make sure all relevant components are available in the package before proceeding to the next step.
3 About the device The RTX745x device is an EHS/USB wireless base station which provides USB connectivity to PC/laptop/desktop phone and DECT connectivity to RTX725x headsets/DECT speakerphone. It is designed as a Plug & Play solution, meaning that no additional driver installations are needed. The figure below (Fig.1) illustrates the high-level description of the communication possibilities of the device. The RTX745x base is connected to a host (PC or desktop phone) with USB interface.
The base includes a 2.4-inch 240x320 TFT display for status and configuration. Furthermore, it has 3 keys for call control handling (hook off, hook on and mute), a clickable scroll-wheel and a key for easy menu navigation (Fig.3). Fig.3 RTX745x front view Fig.
3.3 Ringer configuration The RTX745x has a built-in ringer for audible alerts for the user. The audio settings of the ringer can be configured via the PC Setup tool or the base menu. The ringer may be muted by selecting “Silent mode” in the PC Setup Tool. 3.4 Connect to VoIP multicell systems The RTX725x headset and RTX7451 base together can integrate into VoIP multicell and dual cell systems. The base will register on behalf of itself and the headset.
4 User interface As mentioned above, the RTX745x base supports a 2.4-inch 240x320 TFT display which has a user-friendly interface (UI). The UI is designed to be operated in an arms distance, meaning that the status bar is large and visible (Fig.8). However, the icons shrink in size when navigating through the device’s menu, yet still allowing the user to see the status (Fig.9). Fig. 8 Large status bar Fig.9 Small status bar 4.
Battery status (Default) No battery, please charge device Battery status (Collapsed) Call icon animation indicating an incoming call Microphone mute indicates that the microphone state has been changed to mute Hold indicates a call on hold Eco mode indicates enabling/disabling Eco mode for the headsets 4.2 DECT registration status interface The following screenshots represent the interface during a DECT registration (Fig.10). Fig.
Fig. 11 Incoming call Fig.12 Call swap Fig. 13 Call queue (#15) 5.2 Active call When a call is active, the base displays the active call and the audio path is connected between the far-end party and RTX725x headset. It is not possible to have more than one active call on a single line at the same time. Fig.14 Active call 5.3 On-hold call When a call is put on-hold, the base displays a hold call status and the audio path is disconnected between the far-end party and the RTX725x headset (Fig.
5.4 Multiple calls There is more than one call existing in a single line. EHS line does not support multiple call. Fig.16 Multi call 5.5 Multiple line There is more than one call existing in different lines. 5.6 Active & Inactive line When a line is active, the base displays active line and the audio path is connected via the line. It is not possible to have more than one active line at the same time.
5.9 Microphone muting Microphone muting control is separated into two muting statuses. Each line has its own microphone muting control. When the line is switched, the related microphone muting control will also be switched. 5.10 Volume control Similar to the microphone, the volume control is also divided into two sets of volume. This means that, each line has its own volume control. When the line is switched, the related volume control will be also switched. RTX745x GUIDE 1.
6 Features overview This section aims to introduce you to the available features on the RTX745x base. Some of the features will be briefly described through the sections below, whereas the main highlights will be presented via a table with function descriptions. 6.
Headset interface Charging terminals Operating conditions Spare battery charger Call features Call waiting Hold / Retrieve No. of simultaneous calls Call Conference Call Swap DECT Output Power Sensitivity Antenna Range Security Software update Downloadable Air-interface Update support RTX745x GUIDE 1.
7 Regulatory compliances 7.1 Safety & Type approvals The regulatory compliance and measurements reports required are: Approval Safety Safety Safety FCC FCC FCC FCC IC IC IC IC IC CE CE CE CE CE CE CE RCM RCM RCM RCM RCM RCM RTX745x GUIDE 1.
7.2 Environmental compliances RoHS Per Directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment REACH Per Directive 1907/2006 on Registration, Evaluation and Authorization of Chemicals WEEE Per Directive 2012/19/EU on Waste Electrical and Electronic Equipment (RTX will add waste bin information on product labels).
8 Declaration of compliance 8.1 FCC warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Cet appareil est compatible avec la licence de l’Innovation, la Science et le développement conomique du Canada à l’exemption des normes RSS. Le fonctionnement est sujet aux deux (2) conditions suivantes : (1) Cet appareil peut ne pas causer de l’interférence, et (2) Cet appareil doit accepter l’interférence, incluant de l’interférence qui peut causer un mauvais fonctionnement de cet appareil.
