RTX8210/RTX8212 BT TAG Technical Reference Document Version 4.8 © Oct-2019 RTX A/S, Denmark BT Tag GUIDE 4.
Trademarks RTX and the combinations of its logo thereof are trademarks of RTX A/S, Denmark. Other product names used in this publication are for identification purposes and maybe the trademarks of their respective companies. Disclaimer The contents of this document are provided about RTX products. RTX makes no representations with respect to completeness or accuracy of the contents of this publication and reserves the right to make changes to product descriptions, usage, etc., at any time without notice.
Contents 1. About This Document ................................................................................................................................................. 4 1.1 Audience ................................................................................................................................................................... 4 1.2 Important Assumptions ..............................................................................................................................
1. About This Document This document describes the functionality of the RTX8210/RTX8212 BT Tag in RTX generic mode. For customer specific modes refer to specific customer agreements, which describe the software operational deviations from this document. 1.1 Audience Who should read this guide? First, this guide is intended for networking professionals responsible for designing and implementing RTX based enterprise networks.
Cet équipement est conforme aux limites d'exposition au rayonnement ISEDC établies pour un environnement non contrôlé. This Class B digital apparatus complies with Canadian ICES-003 CET appareil numérique de la classe B est conforme á la norme NMB-003 du Canada 1.4.3 CE certification This device meets the current EU legislation by having the following characteristics: (1) 2.x Radio frequency (2) Bluetooth operating frequency: 2402-2480MHz (3) Maximum power: 0dBm 1.
1.9 Documentation Feedback We always strive to produce the best and we also value your comments and suggestions about our documentation. If you have any comments about this guide, please enter them through the Feedback link on the RTX website. We will use your feedback to improve the documentation. 2. Introduction to BT TAG This chapter aims to introduce you to RTX8210/RTX8212 BT TAG, its functionalities and how to connect it to your RTX8200 Location gateway. 2.
On the front side there is a sticker with a Data matrix barcode and the MAC address of the device. If scanned, the barcode gives information about the MAC address of the device, as seen on the label. The grey spot next to the sticker marks the button of the BT TAG, which serves for activating the device and sending beacons (See chapter 2.4.1 Button features for more details). 2.2.1 How to open the device The main purpose for opening the device is for changing the battery.
- Step 3: After opening the BT Tag, the following should be visible to the user On the inner side of the RTX8210/RTX8212 there is information about the product’s certificates, beacon and battery type, and more. There is a plastic plate under the battery which should be removed in order to activate the battery (see the picture below). Remove the battery and take out the plastic BT Tag GUIDE 4.
2.2.2 Mounting One of the main purposes of the BT Tag is to track objects, meaning that the Tag can be attached to them. Installing the device correctly will make a difference in the performance. The following is a general guideline on how to position the device for better functionality. The tag transmits approximately -3dBm of power and has a radiation pattern as shown on the image below.
On the contrary, a bad mounting solution in the same scenario would be placing the Tag in a horizontal way under the bed, as shown on the second illustration. By doing so, the signal strength will not be as strong and will be partly blocked by the bed. To make it easier and accessible for the user to attach the BT Tag to objects, RTX has added 2 extras. The device comes with a double-sided adhesive tape in the box that allows the user to attach it to any other object than ferromagnetic parts.
Despite the magnets, the user should avoid mounting the RTX8210/RTX8212 to a metal surface and instead use the tape to stick it to another available exterior, if possible. An example is shown on the Image 1 where the Tag is positioned on the wooden material, instead of the metal frame of the bed. 2.3 Power to device The RTX8210/RTX8212 uses CR2016 in order to have power and comes with the battery already in the device.
2.4.1 Button features The BT Tag has one physical button which handles the base function of the Tag, such as activating the device and sending beacons. Depending on the way the button is pressed, one of the cases will apply: • • • No press – when the button is not pressed and no movement is detected, the Tag is in sleep mode in order to save power.
The function is very useful when attaching the Tag to an object, such as hospital or technical equipment. By doing so, one can track if any of these objects have been moved to another room or out of the building. Moreover, the Tag is portable and can be carried by any employee which the company would like to keep track of. The device is programmed to detect the normal walking speed which is 1.4m/s, therefore if a movement is below 1.4m/s, a higher force will be required to wake up the BT Tag.
CHECKLIST FREQUENTLY ASKED QUESTIONS (FAQ) ▪ ▪ ▪ ▪ ▪ ▪ The Tag does not detect movement. What should I do? o Short press the button and a green LED will blink 3 times o Long press the button to activate the device o Change battery and activate the device There is no green LED when I press the button.
APPENDIX A Beacon Broadcast data iBeacon (Apple) Byte Value Description 0 0x1A Advertising Length 1 0xFF Advertising Type (locked to Custom Manufacturer Packet) 2-3 0x4C00 Manufacturer ID (locked to Apples BT SIG identifier) 4 0x2 Subtype (locked to iBeacon) 5 0x15 Subtype length 6-21 Proximity UUID 22-23 Major 24-25 Minor 26 Signal Power (RSSI measured @1m) AltBeacon (Radius Networks) Byte Value Description 0 0x1B Advertising Length 1 0xFF Advertising Type (locked to Custom
Eddystone-UID (Google) Byte Value Description 0 Frame Type 0x00 1 Signal Power (RSSI measured @0m) 2-11 Namespace 12-17 Instance 18 0x00 Reserved 19 0x00 Reserved APPENDIX B Use cases versus battery consumption As mentioned before, the battery consumption may last up to 1 year, depending on the user’s scenario. In order to deliver high quality services and products, RTX has made a calculation file which enables the user to measure the estimated battery life depending on the scenario.
As you can notice from the calculations above, the more the button is pressed, the more power it is consuming from the battery. As mentioned before, this is due to the LED that blinks every time the button is pressed. Moreover, the “Transmit interval in motion” is fixed and cannot be changed. It is present in the table, because it is used for the calculations. For more details about the calculation file, please contact RTX support. BT Tag GUIDE 4.