User's Manual

ManualsBrandsRTX Hong Kong ManualsElectronicsPCS Handset

CORDLESS DECT PHONE

INSTRUCTION MANUAL

The crossed-out wheeled bin symbol that can be found on your product means that the product is covered

by the European Directive 2002/96/EC and it indicates that this product should not be disposed of via the

normal household waste stream.

To prevent possible harm to the environment or human health, please separate this product from other waste

streams to ensure that it can be recycled in an environmentally sound manner.

For more details on available collection facilities, please contact your local govern office or the retailer where

you purchased this product.

Summary of content (8 pages)

PAGE 1
CORDLESS DECT PHONE INSTRUCTION MANUAL P The crossed-out wheeled bin symbol that can be found on your product means that the product is covered by the European Directive 2002/96/EC and it indicates that this product should not be disposed of via the normal household waste stream. To prevent possible harm to the environment or human health, please separate this product from other waste streams to ensure that it can be recycled in an environmentally sound manner.
PAGE 2
FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
Handset Charger Unit 1. 2. 3. 4. 5. 6. 7. 8. Charger charge contacts 9. Power indicator 10. Power supply unit LCD screen Function keys Ear piece/Receiver Mouth piece/Microphone Battery compartment cover Handset charge contacts Headset jack (optional) Accessories & Content Following items are included in the package of this Designer’s Phone: – – – – – – Handset unit (additional handsets may be included according to product package) Charger unit Rechargeable AAA size NiMH batteries (1.
PAGE 4
2. On the handset, gently slide & open the battery cover and insert the rechargeable batteries come with the package. Make sure batteries following the polarity indication marked inside battery compartment. LCD screen will turn up as soon as battery connection is through. Display & their Indication In standby/idle mode:L1 L2 Symbol IMPORTANT NOTICE : This DECT phone has to be registered to the E-MTA cable modem. Please read carefully the “READ ME FIRST” before you start the following installation.
PAGE 5
Handset Unit Preparation Before Use Before going through the following keypad functions, it is a good idea to understand multiple functions may be assigned to a single button in order to reduce buttons cluster. Button In Standby In Conversation Push this button to answer This button functions as an incoming call or to make Flash to switch between 2 a call. lines In Programming/Viewing Mode When reviewing phone book, redial list or caller ID records, push this button to start dialing.
PAGE 6
Keypad Lock Normal Operation During standby mode, you can lock the keypad by the following procedures. To Make & Receive Calls To make a new call – 1. Make sure the symbol on the handset screen is steady and this indicates good connection to the base unit. If the display show SEARCHING , it indicates the handset is too far away from the base unit. 2. You may enter the telephone number to be called before or after pushing button. Entered number will be dialed automatically. 1. 2. 3. 4.
PAGE 7
To Delete Phone Book Memory 1. 2. 3. 4. 5. Personalizing Your Phone Push button to enter phonebook memory. Find your desired entry. Push button. Push button to select DELETE Push button to confirm. This DECT phone is built with features to offer you personalized settings, such as ringing melody, ringing volume and key click. or DELETE ALL . Different ringing melody and volume can be programmed to each handset. The entry is deleted! To set external ring melody: – To Change Phone Book Memory 1. 2. 3.
PAGE 8
Please refer to below operation to apply on the two handsets you want to bring them to walkie-talkie mode Key Map:- Q1. My phone does not work! 1. 2. 3. 4. 5. 6. The display will show GROUP: . Enter any 4-digits number and both handsets must enter with the same number. The display will show HS NUMBER: . Define the handset number of the handset which already in the walkie-talkie mode. Now the two handsets are now in walkie-talkie mode.