ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSAMBLE Height: 63 in Width: 19,76 in Depth: 13,34 in Alto: 160 cm Ancho: 50,2 cm Fondo: 33,9 cm LOT N° REF./SKU. SL-CAB-4 EMERY SLIM BOOKCASE Biblioteca delgada Emery For assistance with assembly or customer service, call 1-877-924-2090 (English) Monday-Friday, 8 a.m. to 5 p.m. Mountain Time, North America. Email: customerservice@rstbrands.com or visit our website at www.rstbrands.
! IMPORTANT RECOMMENDATIONS / RECOMENDACIONES IMPORTANTES -The cabinet MUST be used exclusively indoors, do not expose to direct sun. / El mueble debe ser usado únicamente en interiores, no exponer al sol directo. -Do NOT overload the cabinet (see suggested loads), Do not hit or hammer the cabinet (just when indicated). / NO sobrecargar el mueble (ver las cargas sugeridas). No golpear ni martillar el mueble (solo cuando se indique). -Do not drag, lift and move between two people.
INDEX ÍNDICE Assembly Hardware 4 Herrajes para Armado 4 Assembly Parts 5 Piezas de Armado 5 Suggested Loads 6 Cargas Sugeridas 6 Assembly Recommendations 6 Recomendaciones de Ensamble 6 Assembly Steps 20 Warranty REQUIRED TOOLS* *Not included, and not shown actual size. Page 3 7-19 Pasos de Armado Garantía 7-19 20 HERRAMIENTAS NECESARIAS* *No incluidas y no se muestran en tamaño real.
ASSEMBLY HARDWARE HERRAJES PARA ARMADO Please check that the hardware content is correct. If any item is missing, please call to our customer service line. Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente.
ASSEMBLY PARTS PIEZAS DE ARMADO A C B B F F G I L J K P H M F E D D F N O A - x1 B - x2 C - x1 D - x2 E - x1 Page 5 F - x4 G - x1 H - x1 I - x1 J - x1 K - x1 L - x1 M - x1 N - x1 O - x1 P - x1
MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS 17lb 8kg 11lb 5kg 17lb 8kg 11lb 5kg ASSEMBLY RECOMMENDATIONS RECOMENDACIONES DE ENSAMBLE Two people are recommended to assemble the product. Ensamble el mueble entre dos personas. Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the carton box of the product.
1 Bx2 1 ! Do NOT tighten the cams in this step. NO apriete las cajas minifix en este paso.
3 1 Gently hit the pieces with a rubber hammer to adjust the joint. Golpee suavemente la pieza con un martillo de goma para ajustar el ensamble. 2 B B Turn minifix cams to the right to tighten. Gire las cajas minifix hacia la derecha para apretar las piezas.
5 A B B F C 1 Rotate to tigten. Gire para apretar.
7 Rotate to tigten. Gire para apretar. D D E 1 8 F D E F Page 10 D Rotate to tigten. Gire para apretar.
9 N O 10 O N Rotate to tigten. Gire para apretar.
11 G G x2 WHEN PLACING THE SLIDE ON THE SIDE OF THE CABINET: PARA PONER RIEL EN LATERAL DEL MUEBLE: The plastic stop must be placed on the rear.
I 1 14 G I H Rotate to tigten. Gire para apretar.
15 J Turn Over Voltear J ! WHEN PLACING THE SLIDE ON THE SIDE OF THE DRAWER: PARA PONER RIEL EN LATERAL DEL CAJON: The metallic stop must be placed on the front. Revisar que el tope metálico del riel quede en la parte delantera.
17 M 18 2" J L K Page 15
19 L J K P Slide. Deslice. 20 Gently hit the pieces with a rubber hammer to adjust the joint. Golpee suavemente la pieza con un martillo de goma para ajustar el ensamble. 1 L J P M Page 16 2 K Rotate to tigten. Gire para apretar.
21 Metallic Legs Installation Instalación de Patas Metálicas 1/2" x2 O D G N F E B F F D F 1 1/2" H A B x13 22 ! Be careful turning over the cabinet. Tenga cuidado al voltear el mueble.
23 A B C B F F J H P K M F D Slide the drawer inside the cabinet. Deslice el cajon dentro del mueble. E D F N O Put the screw cover caps in the legs visible screw heads. Ubique las tapas tornillo en las cabezas de los tornillos visibles de las patas.
24 ! For the user safety, it is recommended to anchor the cabinet to the wall. Por la seguridad del usuario se recomienda anclar el mueble a la pared. -WARNING! TIPPING HAZARD – Unanchored furniture can tip over -WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. -IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED) -Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit.
WARRANTY POLICY PÓLIZA DE GARANTÍA Welcome to the RST Family Here at RST Brands™ we are committed to your satisfaction by offering you a competitive warranty to ensure all our products are free from defects, in material and workmanship, to the original purchaser for a period of one year from the date of your purchase. How It Works We are happy to furnish a replacement at no cost to you in the case we determine a component to be defective.
