User Manual

ManualsBrandsRSI VIDEOTECHNOLOGIES ManualsElectronicsOutdoor Streaming Motion Viewer

The OSMV 210/611/712 Outdoor Streaming Motion Viewer is a is a

wireless, battery operated, motion activated or electrically activated

outdoor camera designed for use in Videoﬁed

security systems.

• Powered by 4 Lithium batteries for extended battery life.

• 90° multi-purpose lens (by default).

• Provided optional lenses: curtain, pet-immune or long range beam.

• 4 infrared LEDs for 12m night vision.

• Standard detection distance (up to 14 meters).

• Fully weatherproof (IP54) and temperature resistant (-25°C/+70°C).

• Wall, cover and movement tamper triggered by tilt sensor.

• Transmits check-in/status signal every 8 minutes.

• 3 wired programmable inputs.

• 1 wired programmable output triggered on detection.

• Video capture and transmission in «streaming mode» on user

request.

Product Summary

Installation Guidelines

For easier installation, programming and RF testing should be done to check

for good communication between the control panel and all system devices

before mounting system devices.

Install the detector and other system devices in the order of the following

steps:

> Programming/RF Testing - program detector and all other devices into the

control panel and test RF communication from each intended device location

to the control panel.

> Mounting - mount detector at the tested location.

Mounting

> Use proper tools and hardware.

> Mount camera between 2.5 m to 3,5 m height.

> The OSMV MotionViewer detection distance may vary depending on

mounting (height, tilt). The OSMV is not suitable to protect an area, it needs to

be used to protect an access point or any property.

> Mount detector aimed toward the spot to protect.

> In order to reduce false alarms, do not aim the detector toward vegetation,

a road, or unlimited space.

> Do not cover the Fresnel lens. Use only the provided masking kit to block

detection towards specific spots (trees, bushes, etc.).

MB110 Mounting kit for

Outdoor MotionViewer

DOC. - REF. 213-OSMV

VERSION : AUGUST 2016

INSTALLATION SHEET

OSMV OUTDOOR STREAMING MOTION VIEWER

Summary of content (12 pages)

PAGE 1
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER DOC. - REF. 213-OSMV VERSION : AUGUST 2016 Product Summary The OSMV 210/611/712 Outdoor Streaming Motion Viewer is a is a wireless, battery operated, motion activated or electrically activated outdoor camera designed for use in Videofied® security systems. • • • • • • • • • • • Powered by 4 Lithium batteries for extended battery life. 90° multi-purpose lens (by default). Provided optional lenses: curtain, pet-immune or long range beam.
PAGE 2
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Programming/RF Testing/Mounting The following provides summarized steps for device programming, testing, and mounting. For complete details, refer to the control panel installation manual. 1 Separate the base from the box 2 Install 4 3.6V LS14500 SAFT batteries observing correct polarity. 10 The keypad displays : AREA : 1 Screw 5 Press OK/YES. the display shows PRESS PROGRAM BUTTON OF DEVICE.
PAGE 3
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Mounting Recommendations Please direct the OSMV towards the access point or the asset you need to protect. The detector should not be mounted close or above an access point. Such installation increase the probability of a missed intrusion. For optimal use, OSMV MotionViewer mounting shall respect the following recommendations: Mounting height : RSI Video Technologies recommends a 2,5 m to 3,5 m mounting height.
PAGE 4
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Tilt Tamper The OSMV MotionViewer can detect manipulation thanks to its built-in electronic accelerometer. This device can detect shocks, movements, wall or cover tamper but also changes in its orientation. Rotation axe transversal Rotation axe longitudinal When a movement of the OSMV is detected, the LED lights up for 3 seconds. When it is armed for the first time, the OSMV registers its position in space.
PAGE 5
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Infrared detection The OSMV outdoor MotionViewer uses standard infrared detection. The PIR is optimized for the detection of individuals. Several parameters affect the detection : • Subject thermal signature (size, width, temperature and emissivity). • Detection environment (ambient temperature, reflectivity of the surfaces, the presence of water or moist surfaces). • Speed and direction of the movement.
PAGE 6
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Optional lenses installation The following steps describe the OSMV lens replacing procedure: 1 Carefully loosen the 4 screws of the lens frame. Do not use an electric screwdriver. This can damage the threads. Leave the screws on the threads in order not to lose them. Lens frame screw 2 When the 4 screws are loose, push on each one with a screwdriver to remove the lens frame. 3 Remove the lens frame and the lens.
PAGE 7
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Optional lenses The OSMV MotionViewer is provided with 3 optional lenses. With these lenses the detection can be adapted to the site environment. Curtain lens (vertical) Max detection distance : CURTAIN LENS Mounting height Tilt angle 5° 10° 15° 20° 30° 2.5 m 14 m* 11 m 8m 6,5 m 2.75 m 14 m* 12 m 9m 7m 5m 3m 14 m* 13 m 9,5 m 7,5 m 5,5 m 3.25 m 14 m 10 m 8m 5,5 m 3.
PAGE 8
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Sensitivity adjustment The OSMV detector comes with the capability of adjusting the sensitivity level of the PIR. It can improve the detection or, on the contrary, reduce false alarms. Raising sensitivity will raise detection range, the detection field will be larger and smaller thermal signatures will be detected. You should only use this feature when the site has been diagnosed as needing this adjustment.
PAGE 9
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER 90° masking kit The OMV MotionViewer is provided with a 90° masking kit (only compatible with the multi-purpose 90° lens). With this kit you can inhibit specific zones in the detection field because elements in those zones can generate false alarms, like a tree or a road. Detach the precut elements from the kit to only leave the zones that will be masked, as shown below.
PAGE 10
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER Security notes / (FR) Notes de sécurité / (DE) Hinweise zur Sicherheit English Français Deutsch • Remove the batteries before any maintenance ! • WARNING, there is a risk of explosion if a battery is replaced by an improper model ! • Observe polarity when setting up the batteries! • Do not litter the batteries when they are used! Dispose of them properly according to Lithium Metal requirements • Retirez les piles avant toute opération de maintena
PAGE 11
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER ELECTRICAL PROPERTIES DETECTION PROPERTIES Panel compatibility Infrared detection specifications W panels Streaming option X and VISIO panels Without streaming option Power requirements Type C - 4 Lithium batteries 3,6 V LS14500 Technology Passive infrared DSP Type Dual element sensor Detection lens • 90° • 1 m wide curtain (vertical or pet-immune) • Long distance beam (up to 1m diameter) Battery life Standard usage (up to 5 videos per m
PAGE 12
INSTALLATION SHEET OSMV OUTDOOR STREAMING MOTION VIEWER STANDARDS AND CERTIFICATIONS 868MHz (OSMV 210) 915MHz (OSMV 611) Compliant with the annex IV of the R&TTE Directive 1999/5/EC Part 15C USA FCC RSS-247 Issue 1 Canada IC 920MHz (OSMV 712) Australia C-Tick AS/NZS4268 This symbol on the product or on its packaging indicates that this product should not be treated as household waste.