User Manual

KF210/611/712 1-BUTTON REMOTE KEYFOB
INSTALLATION SHEET
DOC. - REF. 217-KF PANIC
MODIF. DATE : NOVEMBER 2016
1
Operation
Press and release the keyfob button to send an assistance request to the Alarm Receiving Center, and, depending on the Videofied
®
system programming, trigger the sirens.
A beep is emitted when pressing the button. The reception of the request is confirmed by a green double-flash from the keyfob
LED.
> Note : This keyfob is powered by a CR3032 lithium battery with a 5-year battery life.
Keyfob registration
The alarm panel shall be in “device registration” mode,
the keypad displays “PRESS PROGRAM BUTTON OF
DEVICE”.
The keyfob is provided with the battery installed. Press
the keyfob button for 10 seconds.
When releasing the button, the keyfob beeps and
flashes every second then registers.
If the keyfob is not recorded, confirm that the keypad is
displaying:
then press and hold the keyfob button again (by
strongly pressing the button).
PRESS PROGRAM
BUTTON OF DEVICE