User's Manual

ManualsBrandsRoyalTek ManualsElectronicsBluetooth GPS Receiver

English 1

RCD-1000

GPS Speed Camera Warning Device

Quick Guide

Congratulations on your purchase of the GPS Camera warning device.

The Detector is equipped with the latest generation SiRF Star III digital

processor specially designed for fast and accurate fix on GPS signals. The

RCD-1000 will help you to drive safely, when the database has been

downloaded, the device will compare your position using its built-in GPS

antenna with the position of every known danger locations and give you an

audible and visual warning as you approach them.

With the latest in GPS technology, RCD-1000 device also can become a GPS

Receiver to deliver GPS information.

Before starting using the device please refer to the following for content

checking.

Contents packaged with your GPS Device purchase:

1. GPS Camera Warning Detector

2. USB cable

3. Car Charger

4. External antenna (optional)

5. Dashboard Pad

Summary of content (6 pages)

PAGE 1
RCD-1000 GPS Speed Camera Warning Device Quick Guide Congratulations on your purchase of the GPS Camera warning device. The Detector is equipped with the latest generation SiRF Star III digital processor specially designed for fast and accurate fix on GPS signals.
PAGE 2
Button, Mini USB, Volume Control & External Antenna Port Speed Limit button POI Button Mini USB Port Volume Control External Antenna Port (1) The POI record Button: Press for more than 2 seconds to record current position. A short beep sound will inform you that the POI has been successfully store User can manage the POI information via the supplied software. Note: The POI Record Button function will be enabled after GPS is fixed and the Camera database is pre-uploaded into memory successfully.
PAGE 3
LED Display & Audio Alarm Front View 1 English 2 3 3
PAGE 4
Event 1 System Initialize 2 GPS Search 3 GPS is fixed 4 5 6 7 8 9 10 11 12 13 LED Display Audio Alarm Green+ Red (No 1+No 2+No3), 1 beep Sweeping Green (No.1) Blinking Green (No.
PAGE 5
Connect to PC or Notebook for “Speed Camera Detector Utility” User can upload the Camera database and manage the POI using the supplied “Speed Camera Detector Utility”. User also can download the GPS log file to PC/Notebook supplied software. Refer to the supplied software application user manual to install the software utility. Connect to PC or Notebook for Update Camera Database User can update the Camera Database using the supplied software.
PAGE 6
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.