IMPORTANT SAFETY INFORMATION Read all of these instructions carefully, and save them for reference. Follow all warnings and instructions marked on the product, Clip the swivel base on to the monitor before installation. Unplug the monitor from the system unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Use only attachments recommended by the manufacturer; unapproved attachments may be hazardous.
The monitor is equipped with a three-wire grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. Do net allow anything to rest on the power cord. Do not locate the monitor where people may walk on the cord.
If the monitor has been dropped or the cabinet has been damaged. When the video monitor exhibits a distinct change in performance. To ensure satisfactory operation, use the monitor only with UL Listed computers which have appropriate configured receptacles marked between 100 240 VAC, Min. 3.0A.
FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, Tess limits are designed to provide reasonable protection against harmful interference in a residential installation.
TABLE OF CONTENTS GENERAL tines comediennes 1 PRODUCT PACKAGE. 2 installing and Removing the Swivel Base 2 INSTALLATION Safety Checks... Connecting the Video Cable. Connecting the Power Cord. WWW Front Panel Description: Auto Save Function, On Screen Display {! ) How to Adjust a Function and Description of the OS] Carol Temperature. Nmoabdbhe POWER MANAGEMENT... icon cents severance antes TROUBLESHOOTING. No Picture. Poor Picture Picture Locks or Center Shifts. Picture is Too Large or Small.
GENERAL DESCRIPTION This monitor is a high-performance intelligent multi-scan color monitor. It is designed to be compatible with all modes between 30 kHz and 70 kHz. The microprocessor-based design was implemented with the user in mind, providing digital user controls for precision, auto synchronization and auto sizing for convenience, user improbability for flexibility, as well as builtin tilt and swivel base for comfort in prolonged usage.
PRODUCT PACKAGE Plan the most convenient location for your monitor and avoid using sharp object in opening the carton. Open the shipping carton and check the contents of the package. The package should include the following items: + Monitor + Swivel base + Power cord if any items are missing, contact your supplier immediately. Remove the monitor from its shipping carton. Save the carton and packaging materials, in case you ever need to pack and relocate the monitor.
INSTALLATION Safety Checks Make sure the monitor and system unit power switches are off, when you start connecting cables. This monitor is set for 100-240 Vac 80/50 Hz (full range). Confirm the line voltage for your monitor by checking the voltage label on the rear panel of the monitor. POWER N VIDEO tN Figure 3 Installing the Swivel Base Connecting the Video Cable The monitor comes with a built-in video cable.
OPERATION All the adjustments are controlled by a Rotary Encoder located on the right front side. See Figure 4. User could make a good appear-acne of the monitor to suit your personal preference by the Encoder. Main Power Rotary Encoder Power Indicator Figure 4 Power Switch and Control Knob Front Panel Descriptions MAIN Power( © ): To turn on or off the monitor. Power Indicator: Lights up when the power is ON. Rotary Encoder: To control functions of the monitor.
Figure 5 The OSD Message How to Adjust a Setting Press the Encoder to show the OSD window. Rotate the Encoder to switch the desired function. See figure 5. Press the Encoder again to select the function that you want to adjust, Rotate the Encoder to change the adjustment of the selected function. If you do not change any other setting, the OSD window will go out after approx.
To adjust the balance of the display. Trapezoid: To adjust Trapezoid distortion, 7 Parasite: a To adjust the parallel of the display. Rotation: To adjust the rotation of the display. Moire: To adjust the moire of the display. Zoom: adjust the zoom of the display. OSD window position: To move up or lower the OSD window position of the display. OSD window position: To move right or left the OSD window position of the display. Power management switch: To enable or disable power management of the monitor.
Color Temperature is measured on the Kelvin (K) temperature scale. The monitor provides 3 color temperature items to user for different view shows. For example. Select 9300°K color for the white page with black word used in word processing and numeric calculations. Selects 6500°K color for the more realistic colors used in picture of people or landscape. The user's personal preferences, please select custom color.
POWER MANAGEMENT This monitor meets the power management standards as set by the Video Electronics Standards Association (VASE) and for the United States Environmental Protection Agency (EPA). This feature is designed to conserve electrical energy by reducing power consumption. This function is actives by an operating system or Windows utility program which turns off the monitor display and also turns off, or changes the color of the monitors power indicator.