21" Digital Control Multiscan Color Green Monitor User's Guide S-111E 3H0Q5N04N4
IMPORTANT SAFETY INFORMATION • Read all of these instructions carefully, and save them for reference. Follow all warnings and instructions marked on the product. • Clip the swivel base on to the monitor before installation. • Unplug the monitor from the system unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. • Use only attachments recommended by unapproved attachments may be hazardous.
• The monitor is equipped with a three-wire grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. • Do not allow anything to rest on the power cord. Do not locate the monitor where people may walk on the cord.
• controls may result in damage and may require extensive work by a qualified technician to restore the monitor to normal operation. If the monitor has been dropped or the cabinet has been damaged. When the video monitor exhibits a distinct change in performance. To ensure satisfactory operation, use the monitor only with UL Listed computers which have appropriate configured receptacles marked between 100 - 240 VAC, Min. 3.0A.
FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TABLE OF CONTENTS GENERAL DESCRIPTION………………………………………………..1 PRODUCT PACKAGE………………………………….…………………..2 Installing and Removing the Swivel Base………………………….……2 INSTALLATION……………………………………………………….…….3 Safety Checks……………………………………………………….……….3 Connecting the Video Cable……………………………………….………3 Connecting the Power Cord………………………………………………3 USB Connector (option)…..………...……………….………………………3 OPERATION………………………………………………………….……4 Front Panel Descriptions…………………………………………….
GENERAL DESCRIPTION This monitor is a high-performance intelligent multi-scan color monitor. It is designed to be compatible with all modes between 30 kHz and 110 kHz. The microprocessor-based design was implemented with the user in mind, providing digital user controls for precision, auto synchronization and auto-sizing for convenience, user programmability for flexibility, as well as built-in tilt and swivel base for comfort in prolonged usage.
PRODUCT PACKAGE Plan the most convenient location for your monitor and avoid using sharp object in opening the carton. Open the shipping carton and check the contents of the package. The package should include the following items: • • Monitor Swivel base • • Power cord USB cable (option) If any items are missing, contact your supplier immediately. Remove the monitor from its shipping carton. Save the carton and packaging materials, in case you ever need to pack and relocate the monitor.
INSTALLATION Safety Checks Make sure the monitor and system unit power switches are off, when you start connecting cables. This monitor is set for 100-240 Vac 60/50 Hz (full range). Confirm the line voltage for your monitor by checking the voltage label on the rear panel of the monitor. Figure 3 Installing the Swivel Base Connecting the Video Cable The monitor comes with a built-in video cable.
OPERATION All the adjustments are controlled by a Rotary Encoder located on the right front side. See Figure 4. User could make a good appear-ance of the monitor to suit your personal preference by the Encoder. Figure 4 Power Switch and Control Knob Front Panel Descriptions MAIN Power( ): To turn on or off the monitor. Power Indicator: Lights up when the power is ON. Rotary Encoder: To control functions of the monitor. Rotate to switch the function or adjust function scale.
How to Adjust a Setting The OSD provide 3 pages menu: a. Geometry / Lumina b. Color c. Other Select symbol go to next page. Select symbol go to previous page. Select symbol to exit the OSD menu. 1. 2. 3. Press the Encoder to show the OSD window. Rotate the Encoder to switch the desired function. See figure 5. Press the Encoder again to select the function that you want to adjust. 4. Rotate the Encoder to change the adjustment of the selected function. 5.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. V-center: To adjust the vertical position of the display. H-width: To adjust the horizontal width of the display. H-phase To adjust the horizontal position of the display. Pincushion: To adjust Barrel and Pincushion. Trapezoid: To adjust Trapezoid distortion. Balance: To adjust the balance of the display. Parallel: To adjust the parallel of the display. Rotation: To adjust the rotation of the display.
4. User-2: To adjust the balance of the display Rotate the Encode to select. 1. 9300° K(Factory preset) 2. 6500° K(Factory preset) 3. USER-1(9300° K background color) 4. USER-2(6500° K background color) If choice 3 (USER-1) or 4 (USER-2) then press Encode You can adjust R-gain, G-gain or B-gain. - R-drive Rotate the Encoder until the red symbol changes color and press Encode to select it, then Rotate the Encode to adjust Red-Gain.
To get the factory preset parameters for Contrast, Brightness, V-size, V-center, H-width, H-phase, Pincushion, Trapezoid, Balance, Parallelogram, Rotation and Moire.
POWER MANAGEMENT This monitor meets the power management standards as set by the Video Electronics Standards Association (VESA) and /or the United States Environmental Protection Agency (EPA). This feature is designed to conserve electrical energy by reducing power consumption. This function is actived by an operating system or Windows utility program which turns off the monitor display and also turns off, or changes the color of the monitors power indicator.
TROUBLESHOOTING This section provides solutions to minor problems you may encounter when installing or using this monitor. If the problem persists after trying the suggestions in Table 1, contact your place of purchase. No Picture - Check that both power and signal cable are securely connected. Adjust the brightness and contrast controls. Poor Picture - Adjust the brightness and contrast controls. Check your display adapter configuration. (Refer to your display adapter manual.
TECHNICAL INFORMATION Precautions • • Only a qualified service technician should open the monitor case. Components inside the monitor can cause serious electric shock. Do not attempt to remove the back cover of the monitor by yourself. Contact your monitor dealer or authorized service personnel if your monitor needs to be repaired. To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Specifications CRT: 1. CRT Size 2. Visible Size 3. Deflection 4. Dot pitch 5. Phosphor 6.
Power Supply: 1. Input voltage 2. Consumption Environment: 1. Operating - Temperature - Humidity 2. Nonoperating - Temperature - Humidity : 100 - 240 Vac 60/50 Hz : 150 Watts maximum : 0°C to 40°C : 20% to 80% : -20°C to 60°C : 10% to 90% Dimension: 500 mm(W)x 508 mm(H)x 451 mm(D) (with normal base) Weight: Approx. 26.6 Kgs(NET) X-Radiation: 1. DHHS 2. PTB (Self Certificated) Regulatory: 1. Optional FCC-B/UL/CSA 2. Optional TÜV -GS 3. Optional MPR II(MPR 1990:10) 4. Optional TCO 5. Optional NORDIC 6.
Display Mode Standard Resolution Hor/Ver Frequency Interlaced(I) Non-Interlaced(NI) IBM/VGA VESA/75 VESA/75 VESA/85 VESA/75 VESA/85 VESA/75 VESA/85 VESA/75 VESA/85 640x480 640x480 800x600 800x600 1024x768 1024x768 1280x1024 1280x1024 1600x1200 1600x1200 31.5KHz / 60Hz 37.5KHz / 75Hz 46.9KHz / 75Hz 53.7KHz / 85Hz 60.0KHz / 75Hz 68.6KHz / 85Hz 79.9KHz / 75Hz 91.1KHz / 85Hz 93.7KHz / 75Hz 106.9KHz / 85Hz NI NI NI NI NI NI NI NI NI NI Video Pin Assignments D-Type 15-Pin Connector Pinout Pin no.
