User Manual E.FLEX | A.
User Manual CONTENT 1. Safety Informations 1.1. General Preventive Measures 1.2. Regulations for equipment that connects to power mains 1.3. Technical warnsigns and explanation 1.4. Battery Safety 4 5 6 7 2. Introduction 8 8 3. General Product Information 3.1. Scope of delivery 3.2. Control Functions 3.3. Features 9 9 9 4. Installation & Setup 4.1 Physical Installation and Rigging 4.2 Anti-theft 4.3 Connections 4.3.1.1 DC Power 4.3.1.
User Manual 7. Technical Data / Diagrams 33 35 36 38 41 75 77 8. Troubleshooting 77 9.
User Manual 1. SAFETY INFORMATION 1.1. General Preventive Measures 1.1.1. Please read, understand and follow the instructions. 1.1.2. Store the instructions and information in a safe place. Best solution is the ring binder provided by ROXX. 1.1.3. Follow all safety warnings. Under no circumstances remove safety warnings or other information from the equipment. 1.1.4. Don’t use the equipment for any other intended purpose or manner. 1.1.5. Use only stable and compatible stands and/or brackets.
User Manual 1.1.20. Observe all disposal laws applicable in your country. Especially for the packaging. 1.1.21. Plastic bags are not a toy! Keep away from children! 1.1.22. Please note that changes or modifications which are not approved by the party responsible for compliance will void the user’s authority to operate the device. 1.2 Regulations for equipment that connects to power mains 1.2.1.
User Manual 1.3. Technical warnsigns and explanation In order to prevent the risk of an electric shock, under no circumstances remove the cover/back or open the unit in any way! No user serviceable parts are inside. Service, maintenance and repairs should only be done by qualified service personnel or the manufacturer. Dangerous uninsulated voltage inside the device can cause an electrical shock when opened by unqualified personnel.
User Manual • This is a product which has been developed for professional usage in event technology. It is not suitable as a houshold lighting. • NEVER stare, not even temporarily, directly into the light source. • Don‘t use magnifiers or any other optical instrument to look at the beam. • The effects of this device, expecially the stroboscope effect, can cause problems for sensitive people or may even cause epileptical seizures. 1.4. Battery Safety 1.
User Manual 2. INTRODUCTION 2.1. About us The name ROXX® came easily. Combined with the concentrated knowledge and many years of experience, our three founders, who have been leaving their mark in the event and lighting industry for many years already, came together in 2020 to start this outstanding venture.
User Manual 3. GENERAL PRODUCT INFORMATION 3.1. Scope of delivery 1x E.FLEX A.FLEX 1x Safety-Eye bolt 1x Single DC Power Supply We´re offering a wide range of professional accessories (optional). Please see under menu 6 or at our website www.roxxlight.com 3.2.
User Manual 4. INSTALLATION & SETUP 4.1 Physical Installation and Rigging ROXX E.FLEX A.FLEX may be installed in any orientation. For this purpose the product provides several options: Standing: For vertical high beam illumination like typical wall washing effects, the fixture is designed to use directly without optional Yoke. An integrated tilt screw allows adjustments up to 12°.
User Manual Pendant Light*: The sophisticated and attractive design of the ROXX® E.FLEX A.FLEX makes the luminaire predestinated for the use as a pendant light, e.g. for exhibition booths, galas,… The position of the safety eyelet and the lamp body balancing makes that possible in a perfect way. Included safety eye bolt for hanging down the E.FLEX / A.FLEX.
User Manual 4.3.1.2 Charging the battery, operating and storage • As soon as the headlamp is connected to DC power and either the headlamp is switched off or the LED is not in operation, the internal battery starts charging. • The battery charge status is shown on the display both when the headlamp is on and when it is in standby mode. • The charging time from 0% charge status to 100% charge status is approximately 5 hours at E.FLEX and 3 hours at A.FLEX. • The battery runtime is approx. 7.5 hours (E.
User Manual 4.3.2. DMX Connection The E.FLEX A.FLEX is fully controllable by DMX (USITT DMX512-A standard, based on RS-485) and RDM. It can be connected using either DMX cables or via the built-in LumenRadio CRMX wireless system. DMX Termination on last fixture DMX out DATA GND 1 2 DATA - 3 5 4 XLR pin out DATA + DATA GND DATA - 1 2 3 5 4 DATA + 120 Ohm +/- 5% 4.3.2.1. Cable Connection If using a cabled DMX system, connect the DMX IN cable to the input connector (male 5-pin XLR connector).
User Manual 4.3.2.2. Wireless Connection 19 CH RGB 19 CH RGB 9 CH 1RGB 19 CH RGB 19 CH RGB 19 CH RGB 1 •DMX Next ( 20 ) 1 • CRMX(RX) DMX Next ( 20 ) 1 • CRMX(TX) DMX Next ( 20 ) 1 • CRMX(RX) DMX Next ( 20 ) 1 • CRMX(TX) DMX Next ( 20 ) 1 Next ( 20 ) • CRMX(RX) DMX CRMX Disabled Operation Mode n.a.
User Manual 4.2.2.2. Wireless Connection ! 19 CH RGB 19 CH RGB 19 CH RGB 19 CH RGB 19 CH RGB 1 • CRMX(RX) DMX Next ( 20 ) 1 • BLE DMX Next ( 20 ) 1 CRMX(TX) • BLE DMX Next ( 20 ) 1 CRMX(TX) BLE DMX Next ( 20 ) 1 Next ( 20 ) CRMX(TX) BLE • DMX CRMX Enabled Operation Mode RX Linked Yes, but no DMX Receive Reset Yes DMX Disconnect BLE (Bluetooth) Disabled CRMX Disabled Operation Mode n.a.
User Manual 5. OPERATION 5.1 Start up* Once the fixture is switched On, the boot process starts and the following information will appear on the display: “Ready to ROXX”, the product name and the current software version. After this process, the fixture is ready for operation, and starts in the previously enabled mode. 5.2 Control Display* ENTER ESC OLED Display with Touch-Sensitive controls Press ENTER to access the selection menu for system settings or confirm changes.
User Manual Display Off ESC + Pressing ESC + arrow down simultaneously the display backlight function will set to off and the display will turn off immediately. Once a control is pressed the display backlight will turn on. BLE enabled / disabled ESC + Pressing ESC + Arrow Up simultaneously the Bluetooth will enabled or disabled. Confirm by pressing ENTER, step back by pressing ESC. Manual display flip function* + Use the manual display flip function by pressing arrow up + arrow down simultaneously.
User Manual 5.4 Configuration Home Screen After boot process the fixture is ready for operation and starts in the previously enabled mode. At home screen the following information will appear, depending on the current operating mode: A B C D E F G H DMX Adress Operating Mode (DMX Mode, Quick Light or Standalone Mode) Next available DMX address depending on the fixtures DMX footprint External Data protocol (CRMX, DMX, BLE).
User Manual Level 1 Level 2 Menu DMX Mode Stand Alone Slave Settings System Info DMX Mode 3CH CCT 8CH COLOR MACRO 6CH RGB 9CH RGB 10CH RGB 19CH RGB (default) 21CH RGB 28CH PATTERN 80CH PIXEL 7CH DIRECT 11CH DIRECT 20CH DIRECT 5.4.3 Stand Alone* Press ENTER to access to main menu (level 1). While using the UP / DOWN arrows, please select the menu item “Stand Alone” and confirm by pressing ENTER.
User Manual To adjust brightness please select “Dim” as per the procedure previously described and confirm with ENTER. After use UP / DOWN arrows again to adjust the brightness value between 000-100 and confirm by ENTER or jump back by ESC. Once it´s confirmed or denied the display will automatically jump back to level 3. To stop running a selected auto program please chose “Stop Program” at level 3 or "Stop Stand Alone" at level 2. For returning back to homescreen please press ESC three times.
User Manual Editor* At Editor you have up to three customizable programs which can be defined and run from the menus. Each of the three values contains twenty four user-definable scenes with its own values for RGBL (RAW) or RGB (Calibrated) and shutter, playing continuously in a loop. Each scene has a definable fade-in time for the transition from one color to the other and wait-time. To define a program please press ENTER to access to main menu (level 1).
User Manual Color Macro* 44 different color macros (34x matched LEE color filters, 4 LED colors and 6 different Whites) are available as presets. For each the brightness can be adjusted separately.
User Manual Quick Color* The standalone mode “Quick Color” allows a direct adjustment of the single LED colors R, G, B, L Dimmer and Shutter.
User Manual Starting from home screen press ENTER to access to main menu (level 1). While using the UP / DOWN arrows select the menu item “Stand Alone” and confirm by pressing ENTER. After please select the item “Tunable White” by using the up/down arrows and press ENTER again. Using UP and DOWN controls to select your desired menu item, confirm by ENTER and adjust the desired value by up and down controls and confirm all entries with ENTER.
User Manual Timer* Via the internal timer function, all Stand Alone modes except "Auto" and "Editor" can be conveniently faded in and out after the function is enabled in the previously activated standalone mode, without the need for an external controller. Also it remains active even the fixture is switched off and restarted. Simultaneously, the timer function is available via cable as well as via wireless DMX for master & slave operation.
User Manual Level 1 Level 2 Menu DMX Mode Stand Alone Slave Settings System Info Level 3 Stand Alone Mode Stop Stand Alone Auto Editor Color Macro Quick Color Tunable White User Color Timer Color Settings Color Settings Color Calibration RAW 5.4.4 Slave Mode* Slave Mode allows same model fixtures to be controlled by the “Master” fixture via DMX or wireless DMX (CRMX). The “Master” device should run in Stand Alone mode, all “Slave” devices should set to “Slave”.
User Manual Main Menu Menu level 2 Menu level 3 Menu level 4 Description CRMX On=CRMX enabled / Off= CRMX disabled Operating Mode Receive= CRMX module as Receiver Transmit= CRMX module as Transmitter Transmit Link Yes= pair with CRMX devices. CRMX must be activated on all devices and the pairing must be picked up by a transmitter (Receive Reset).
User Manual DMX Fail AC Fail Settings Hold Hold= last command retains Blackout Blackout= Activates Blackout Emergency Light Emergency Light= Fixtures changes to 5600K Hold Hold= last command retains Blackout Blackout= Activates Blackout Emergency Light Emergency Light= Fixtures changes to 5600K Linear Linear= Light intensity increases linear with DMX value Exponential Exponential= Light intensity can be set more smooth at lower DMX values and broadly at higher DMX values.
User Manual Main Menu Settings Menu level 2 Factory / User Reset Menu level 3 User Reset List Menu level 4 Menu Level 5 Description DMX Mode. 3CH CCT / 8CH Color Macro / 6CH RGB / 9CH RGB / 10CH RGB /19CH RGB / 21 CH RGB / 28CH PATTERN / 80CH PIXEL / 7CH DIRECT / 11CH DIRECT / 20CH DIRECT / 23CH DIRECT / 29CH PATTERN CRMX CRMX Operating Mode. CRMX Receive Reset. BLE BLE Link BLE Password <000000> CRMX Pass to DMX Out.
User Manual 5.4.6 System Info Level 1 Menu DMX Mode Stand Alone Slave Settings System Info Main Menu Menu level 2 System Info Menu level 3 Menu level 4 Firmware Version vx.
User Manual 6. ACCESSORIES 6.1 Filters (Light Shaping Diffusors) Available filters for ROXX FLEX series with order numbers: Filter 5° Art.: 12907800 Filter 10° Art.: 12907900 Filter 20° Art.: 12908000 Filter 5° x 20° Art.: 12908100 Filter 5° x 30° Art.: 12908200 Filter Batwing Art.: 12909600 Filter matrix: Filter Beam / Field Angle Diameter @ 3m E.FLEX A.FLEX E.FLEX / A.
User Manual 6.2 More accessories Filter Filter 5° Filter 10° Filter 20° Filter 5° x 20° Filter 5° x 30° Batwing Art.: 12907800 Art.: 12907900 Art.: 12908000 Art.: 12908100 Art.: 12908200 Art.: 12909600 Half Anti-Glare Art.: 12908301 Groundplate Art.: 12908801 Single PSU E.FLEX Art.: 12909100 Tubes Tube XS Tube S Tube M Tube L Tube XL Tube XXL Art.: 12907201 Art.: 12907301 Art.: 12907401 Art.: 12907501 Art.: 12907601 Art.: 12907701 Full Anti-Glare Art.: 12908401 Base Extension Art.
User Manual 7. TECHNICAL DATA / DIAGRAMS 7.1 Technical drawings and measurements - E.FLEX 188.00 200.00 120.
User Manual 7. TECHNICAL DATA / DIAGRAMS 7.1 Technical drawings and measurements - A.FLEX 120.
User Manual 7.2 IP Rating ROXX products conform to officially classified IP standard levels. E.FLEX /A.FLEXi is rated to IP65 when using the covers for the housing parts. IP stands for Ingress Protection and IP65, according to classified standard, means shielded against dust and high-pressure jets of water from any side. Ingress Protection 65 Protected against a solid object exceeding 50mm, for example, a hand. 1 1 Protected against vertically falling water drops. Limited infiltration is permitted.
User Manual 7.3 Technical Data - E.FLEX Photometrics LED expected lifetime 50.000 hours Lightsource 1x40W RGBL Type of optical system Total Internal Reflection lens (TIR) LED PWM Frequency selectable 800Hz, 1.200Hz, 2.000Hz, 3.
User Manual 7.3 Technical Data - E.
User Manual 7.3 Technical Data - E.FLEX Installation Mounting point on fixture 1x centric M4, optional M4/1/4" adapter for multifunctional clamps Mounting point by optional Yoke centric 13mm / 1/2" hole Orientation Any Rigging possibilities Hanging or ceiling / pendant mount Safety features rear mount for safety wire Minimum distance from flammable materials 0,3 meters (11,8 inch) 7.4 Technical Data - A.FLEX Photometrics LED expected lifetime 50.
User Manual 7.4 Technical Data - A.
User Manual 7.4 Technical Data - A.
User Manual 7.5 DMX Chart 3CH CCT 28CH PATTERN 8CH COLOR MACRO 80CH PIXEL 6CH RGB 7CH DIRECT 9CH RGB 11CH DIRECT 10CH RGB 20CH DIRECT 19CH RGB (default) 23CH DIRECT 21CH RGB 29CH PATTERN 3 CH CCT MODE - Color Calibrated - (Halo not controlable) Function Value Setting 1 Dimmer 000-255 0 - 100% 000 - 004 5600K 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual 2 Shutter Center 3 Color Macro Center 4 Color Macro Crossfade Center (Transition Time between Color Macros) 5 6 Dimmer Halo Shutter Halo 150 - 164 Strobe 6:random closing pulse (fast 165 - 169 Shutter open 170 - 184 Strobe 7: burst pulse (fast 185 - 189 Shutter open 190 - 204 Strobe 8: random burst pulse (fast 205 - 209 Shutter open 210 - 224 Strobe 9:sine wave (fast 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open slow) slow) slow)
User Manual 7 Color Macro Halo 8 Color Macro Crossfade Halo (Transition Time between Color Macros) Please use color macros from ROXX® color macro chart 000 - 005 No function 006-105 0,1s - 10s (0,1s steps) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 6 CH RGB MODE - Color Calibrated Ch.
User Manual 2 Shutter Center 150 - 164 Strobe 6:random closing pulse (fast 165 - 169 Shutter open 170 - 184 Strobe 7: burst pulse (fast 185 - 189 Shutter open 190 - 204 Strobe 8: random burst pulse (fast 205 - 209 Shutter open 210 - 224 Strobe 9:sine wave (fast 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open slow) slow) slow) slow) slow) 3 Red (Center) 000-255 0 - 100% 4 Green (Center) 000-255 0 - 100% 5 Blue (Center) 000-255 0 - 100% 6
User Manual 19 CH RGB MODE - Color Calibrated (default) Ch.
User Manual 10 Shutter Halo 000 - 019 No function 020 - 024 Shutter open 025 - 064 Strobe 1 (fast 065 - 069 Shutter open 070 - 084 Strobe 2: opening pulse (fast 085 - 089 Shutter open 090 - 104 Strobe 3: closing pulse (fast 105 - 109 Shutter open 110 - 124 Strobe 4: random strobe (fast 125 - 129 Shutter open 130 - 144 Strobe 5: random opening pulse (fast 145 - 149 Shutter open 150 - 164 Strobe 6:random closing pulse (fast 165 - 169 Shutter open 170 - 184 Strobe 7: burst pulse
User Manual 17 Auto Programs (override Center + Halo Shutter, RGB, CTC, Color Macro) Dimmer Center + Dimmer Halo still controllable 000 - 005 no function - Stop Program 006-011 Center - 7 Color Fade 012-017 Center - 7 Color Jump 018-023 Center - 15 Color Jump 024-029 Center - 15 Color Jump 030-035 Center - Police RB 036-041 Center - Police B 042-047 Center - Candle Light 048-053 Center - Fireworks 054-059 Center - Red Carpet 060-065 Center - Welding 066-071 Halo - 7 Color Fade (all
User Manual 18 19 Auto Program Speed Device Settings (please see remark *1) 000 - 005 No function - Auto Porgram Speed Stop 006 - 126 Auto Program fast to slow - Forward (clockwise) 127 - 127 Stop 128 - 255 Auto Program slow to fast - Backward (counter-clockwise) 000-029 No function 030-034 Battery Runtime Off (hold 3s) 035-039 Battery Runtime 8 hours (hold 3s) 040-044 Battery Runtime 12 hours (hold 3s) 045-049 Battery Runtime 16 hours (hold 3s) 050-054 Battery Runtime 20 hours (hold
User Manual 21 CH RGB MODE - Color Calibrated Ch.
User Manual 12 13 14 Color Macro Crossfade Center (Transition Time between Color Macros) Dimmer Halo Shutter Halo 000 - 005 No function 006-105 0,1s - 10s (0,1s steps) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) 000-255 0 - 100% 000 - 019 No function 020 - 024 Shutter open 025 - 064 Strobe 1 (fast 065 - 069 Shutter open 070 - 084 Strobe 2: opening pulse (fast 085 - 089 Shutter open 090 - 104 Strobe 3: closing pulse (fast 105 - 109
User Manual 21 Device Settings (please see remark *1) 000-029 No function 030-034 Battery Runtime Off (hold 3s) 035-039 Battery Runtime 8 hours (hold 3s) 040-044 Battery Runtime 12 hours (hold 3s) 045-049 Battery Runtime 16 hours (hold 3s) 050-054 Battery Runtime 20 hours (hold 3s) 055-059 Battery Runtime 24 hours (hold 3s) 060-064 No function 065-069 Display Backlight On (hold 3s) 070-074 Display Backlight Off (hold 3s) 075-079 No function 080-084 DMX Fail - Blackout (hold 3s) 08
User Manual 28 CH PATTERN MODE - Color Calibrated Ch.
User DMX CHART Manual 10 Shutter Halo 000 - 019 No function 020 - 024 Shutter open 025 - 064 Strobe 1 (fast 065 - 069 Shutter open 070 - 084 Strobe 2: opening pulse (fast 085 - 089 Shutter open 090 - 104 Strobe 3: closing pulse (fast 105 - 109 Shutter open 110 - 124 Strobe 4: random strobe (fast 125 - 129 Shutter open 130 - 144 Strobe 5: random opening pulse (fast 145 - 149 Shutter open 150 - 164 Strobe 6:random closing pulse (fast 165 - 169 Shutter open 170 - 184 Strobe 7: b
User Manual 068-079 Effect Pattern 6 080-091 Effect Pattern 7 092-103 Effect Pattern 8 104-115 Effect Pattern 9 116-127 Effect Pattern 10 128-139 Effect Pattern 11 140-151 Effect Pattern 12 152-163 Effect Pattern 13 164-175 Effect Pattern 14 176-187 Effect Pattern 15 188-199 Effect Pattern 16 200-211 Effect Pattern 17 212-223 Effect Pattern 18 224-235 Effect Pattern 19 236-255 Effect Pattern 20 000 - 005 Effect Speed - Pattern stops 006-125 Efect Speed Clockwise - fast 126
User DMX CHART Manual 21 Shutter Backlight Halo 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open 22 Red Backlight Halo 000-255 0 - 100% 23 Green Backlight Halo 000-255 0 - 100% 24 Blue Backlight Halo 000-255 0 - 100% 26 Color Macro Backlight Halo (override RGB) 27 Color Macro Crossfade Backlight Halo (Transition Time between Color Macros) 28 Device Settings (please see remark *1) 000 - 004 5600K 005-226 2000K-6500K linear in 20-21K steps (please see
User Manual 28 Device Settings (please see remark *1) 145-149 Dimmer Response LED (Hold 1,5s) 150-154 Dimmer Response Halogen (Hold 1,5s) 155-159 No function 160-164 LED Frequency 800Hz (hold 3s) 165-169 LED Frequency 1200Hz (hold 3s) 170-174 LED Frequency 2000Hz (hold 3s) 175-179 LED Frequency 3600Hz (hold 3s) 180-184 LED Frequency 12kHz (hold 3s) 185-189 LED Frequency 25kHz (hold 3s) 190-194 No function 195-199 Full Calibration (Colors & CCT / Hold 3s) 200-204 CCT Calibration (RA
User Manual 4 Green Center 000-255 0 - 100% 5 Blue Center 000-255 0 - 100% 6 Dimmer Halo 000-255 0 - 100% 000 - 019 No function 020 - 024 Shutter open 025 - 064 Strobe 1 (fast 065 - 069 Shutter open 070 - 084 Strobe 2: opening pulse (fast 085 - 089 Shutter open 090 - 104 Strobe 3: closing pulse (fast 105 - 109 Shutter open 110 - 124 Strobe 4: random strobe (fast 125 - 129 Shutter open 130 - 144 Strobe 5: random opening pulse (fast 145 - 149 Shutter open 150 - 164 Strobe
User Manual 80 Device Settings (please see remark *1) 065-069 Display Backlight On (hold 3s) 070-074 Display Backlight Off (hold 3s) 075-079 No function 080-084 DMX Fail - Blackout (hold 3s) 085-089 DMX Fail - Hold (hold 3s) 090-094 DMX Fail - Emergency Light (hold 3s) 095-099 No function 100-104 AC Fail - Hold (hold 3s) 105-109 AC Fail - Blackout (hold 3s) 110-114 AC Fail - Emergency Light (hold 3s) 115-119 No function 120-124 Linear Dimmer Curve (hold 3s) 125-129 Exponential Di
User Manual 5 Red (Halo) 000-255 0 - 100% 6 Green (Halo) 000-255 0 - 100% 7 Blue (Halo) 000-255 0 - 100% 11 CH DIRECT MODE (RAW) Ch.
User Manual 2 Shutter Center 210 - 224 Strobe 9:sine wave (fast 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open slow) slow) Red Center 000-255 0 - 100% 4 Green Center 000-255 0 - 100% 5 Blue Center 000-255 0 - 100% 6 Lime Center 000-255 0 - 100% 000 - 004 RAW 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual Red Halo 000-255 0 - 100% 13 Green Halo 000-255 0 - 100% 14 Blue Halo 000-255 0 - 100% 000 - 004 RAW 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual 18 19 20 Auto Programs (override Center + Halo Shutter, RGB, CTC, Color Macro) Dimmer Center + Dimmer Halo still controllable Auto Program Speed Device Settings (please see remark *1) 162-167 Halo - Weldingt 168-173 Center & Halo - 7 Color Fade / Uniform 174-179 Center & Halo - 7 Color Fade / Offset 180-185 Center & Halo - 7 Color Fade / Rainbow 186-191 Center & Halo - 7 Color Jump / Uniform 192-197 Center & Halo - 7 Color Jump / Offset 198-203 Center & Halo - 15 Color Fade /
User Manual 20 Device Settings (please see remark *1) 125-129 Exponential Dimmer Curve (hold 3s) 130-134 Logarithmic Dimmer Curve (hold 3s) 135-139 S-Curve Dimmer Curve (hold 3s) 140-144 No function 145-149 Dimmer Response LED (Hold 1,5s) 150-154 Dimmer Response Halogen (Hold 1,5s) 155-159 No function 160-164 LED Frequency 800Hz (hold 3s) 165-169 LED Frequency 1200Hz (hold 3s) 170-174 LED Frequency 2000Hz (hold 3s) 175-179 LED Frequency 3600Hz (hold 3s) 180-184 LED Frequency 12kHz
User Manual Shutter Center 190 - 204 Strobe 8: random burst pulse (fast 205 - 209 Shutter open 210 - 224 Strobe 9:sine wave (fast 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open slow) slow) slow) Red (Center) 000-255 0 - 100% 5 Red Fine (Center) 000-255 0 - 100% 6 Green (Center) 000-255 0 - 100% 7 Green Fine (Center) 000-255 0 - 100% 8 Blue (Center) 000-255 0 - 100% 9 Blue Fine (Center) 000-255 0 - 100% 10 Lime (Center) 000-255 0 - 10
User Manual 16 Shutter Halo 190 - 204 Strobe 8: random burst pulse (fast 205 - 209 Shutter open 210 - 224 Strobe 9:sine wave (fast 225 - 229 Shutter open 230 - 244 Strobe 10: burst (fast 245 - 255 Shutter open slow) slow) slow) Red (Halo) 000-255 0 - 100% 18 Green (Halo) 000-255 0 - 100% 19 Blue (Halo) 000-255 0 - 100% 000 - 004 RAW 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual 23 Device Settings (please see remark *1) 135-139 S-Curve Dimmer Curve (hold 3s) 140-144 No function 145-149 Dimmer Response LED (Hold 1,5s) 150-154 Dimmer Response Halogen (Hold 1,5s) 155-159 No function 160-164 LED Frequency 800Hz (hold 3s) 165-169 LED Frequency 1200Hz (hold 3s) 170-174 LED Frequency 2000Hz (hold 3s) 175-179 LED Frequency 3600Hz (hold 3s) 180-184 LED Frequency 12kHz (hold 3s) 185-189 LED Frequency 25kHz (hold 3s) 190-194 No function 195-199 RAW (Hol
User Manual Red Center 000-255 0 - 100% 4 Green Center 000-255 0 - 100% 5 Blue Center 000-255 0 - 100% 6 Lime Center 000-255 0 - 100% 000 - 004 RAW 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual 16 RAW 005-226 2000K-6500K linear in 20-21K steps (please see detailed CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.
User Manual 22 22 Shutter Backlight Halo Shutter Backlight Halo 000 - 019 No function 020 - 024 Shutter open 025 - 064 Strobe 1 (fast 065 - 069 Shutter open 070 - 084 Strobe 2: opening pulse (fast 085 - 089 Shutter open 090 - 104 Strobe 3: closing pulse (fast 105 - 109 Shutter open 110 - 124 Strobe 4: random strobe (fast 125 - 129 Shutter open 130 - 144 Strobe 5: random opening pulse (fast 145 - 149 Shutter open 150 - 164 Strobe 6:random closing pulse (fast 165 - 169 Shutter
User Manual 29 29 Device Settings (please see remark *1) Device Settings (please see remark *1 000-029 No function 030-034 Battery Runtime Off (hold 3s) 035-039 Battery Runtime 8 hours (hold 3s) 040-044 Battery Runtime 12 hours (hold 3s) 045-049 Battery Runtime 16 hours (hold 3s) 050-054 Battery Runtime 20 hours (hold 3s) 055-059 Battery Runtime 24 hours (hold 3s) 060-064 No function 065-069 Display Backlight On (hold 3s) 070-074 Display Backlight Off (hold 3s) 075-079 No function
User Manual 7.
User Manual 7.
7.000 6.500 6.000 5.500 5.000 2.500 2.000 Color temperature 7.500 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 User Manual 7.5 CTC channel DMX / Color temperature 10.000 9.500 9.000 8.500 8.000 4.500 4.000 3.500 3.
User Manual 7.
User Manual 7.6 RDM Templates* The ROXX Show series features support for various RDM functions. RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional communication between the fixtures and the controller over a standard DMX line. This protocol will allow configuration, status monitoring and management. You will need a RDM controller to get control over the supported parameters. See the tables below for supported RDM features. Label: ROXX E.FLEX A.
User Manual 0x801E Factory Reset Yes/No 0= No / 1= Yes 0x801F User Reset Yes/No 0= No / 1= Yes Sensor 2 Voltage read n.a. 0x0401 Lamp hours read n.a. 0x0400 Device hours read n.a. none Software Version read n.a. Sensor 1 LED Temperature read n.a. RDM functions - A.FLEX For easy identifying ROXX A.FLEX during RDM process the unit will jump from white color to blue color every second.
User Manual Sensors RDM enables various readouts for remote device monitoring. See the table below for sensors and sensor types. Please note: The RDM controller communicates with the fixtures to show only the available sensors for this fixture. The table is subject to change without notice. Name Temperature xx°C / xxx°F Software Version SW-Version Errors 7.7 Firmware Update To update E.FLEX / A.FLEX to newest firmware, please use ROXX update box and make sure the fixtures are connected to DC power.
User Manual 9. MANUFACTURER´S DECLARATION Manufacturer´s Warranty & Limitations of Liability Please find our warranty conditions and limitations of liability inside our manufacturer´s declaration at www.roxxlight.com/support Requesting Warranty-Service To request warranty service for your product, please contact: ROXX GmbH, Hansestr. 91, 51149 Köln Email: info@roxxlight.com or the ROXX authorized reseller in your country, from where you purchased your product.
User Manual CE Compliance The equipment marketed by ROXX GmbH complies (where applicable) with the essential requirements and other specifications of the following Directives: • 2014/53/EU (RED) • 2014/30/EU (EMC) • 2014/35/EU (LVD) • 2011/65/EU (RoHS) The complete EU- and UK-Declaration of Conformity can be found at www.roxxlight.com/support, or you can also request it at info@roxxlight.com ROXX GmbH | Hansestr. 91 | 51149 Köln | www.roxxlight.
