ENGLISH HIGH COM NOISE REDUCTION SYSTEM INTRODUCTION We at Rots) went to thank you for purchasing our audio product. Motel audio products are designed © use the latest electronic techno: dingy, end they incorporate our long experience as a specialist manufacture truer of audio equipment. We are confidant that you will find sass faction in the high quality sound and top performance, and that you will find pleasure in the functional beauty achieved through human engineering concept.
SWITCHES AND CONTROLS {1} Power Button Pres sect once, this button turns on power in the comp ardor. Pressed a second time, the button is released and the unit is turned off. {2} Ra cording Level Control Used in recording through HIGH COM. Controls the recording level of incoming signals from LINE IN semifinals on the rear panel of the anti, Recording signals are delivered from TAPE DECK OUT terminals on the rear angel to the tape deck.
TO COORDINATE UNIT AND TAPE DECK RECORDING AND PLAYBACK LEVELS To use the HIGH COM Noise Re suction System corrosion, it is first necessary to match respective recording and playback levels of the companion and the tape deck. 1. To send 400Hz test tone ta the ape deck, set the mote selector to BYPASS position and depress the rec. check generator button, 2. Insert a cassette into the tape deck and place the deck into REC rode (both REC and PAUSE butts is ON position).