RA‑1572MKII Stereo Integrated Amplifier Amplificateur Stéréo Intégré Stereo-Vollverstärker Amplificador Integrado Estereofónico Geïntegreerde stereoversterker Amplificatore integrato stereo Integrerad stereoförstärkare Интегрированный стерео усилитель Owner’s Manual Manuel de l’utilisateur Bedienungsanleitung Manual de Instrucciones Gebruikershandleiding Manuale di istruzioni Instruktionsbok Инструкция пользователя
RA‑1572MKII Stereo Integrated Amplifier Important Safety Instructions Notice The RS232 connection should be handled by authorized persons only. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing.
Figure 1 : Controls and Connections Commandes et Branchements Bedienelemente und Anschlüsse Controles y Conexiones 1 Controlli e connessioni Bedieningselementen en aansluitingen Controlli e connessioni Kontroller och anslutningar Органы управления и разъемы 2 5 6 7 0 - 3 8 = q w 9 e i 4 r t y o p [ ] u \
RA‑1572MKII Stereo Integrated Amplifier 4 Figure 2 : RR‑AX93 Remote Control Télécommande infrarouge RR-AX93 Fernbedienung RR‑AX93 Mando a Distancia RR-AX93 L M Afstandsbediening RR-AX93 Telecomando RR-AX93 RR-AX93 fjärrkontroll Пульт ДУ RR-AX93 A B C D E N O F G P H Q I J K
Figure 3 : Analog Input and Speaker Output Connections Branchements des entrées analogiques et sorties enceintes acoustiques Anschlussdiagramm (analoge Eingangsanschlüsse, Ausgangsanschlüsse für die Lautsprecher) Conexiones de Entrada Analógicas y de Salida a las Cajas Acústicas Analoge ingangen en luidsprekeruitgangen Collegamenti ingressi analogici ed uscite diffusori Anslutningar för högtalare och analoga ingångar Подсоединение источников сигнала на аналоговые входы и акустических систем Rotel RA-
RA‑1572MKII Stereo Integrated Amplifier 6 Figure 4 : Digital Input and 12 Volt Trigger Out Connections Entrées numériques et Branchements des sorties trigger 12 V Anschlussdiagramm (Digitaleingänge, 12V-Trigger-Ausgänge) Entrada Digital y Conexiones de Salida para Señal de Disparo de 12 Voltios Digitale ingangen en 12V-triggeruitgangen Collegamenti ingressi digitali e segnali Trigger 12 V Anslutningar för digitala ingångar och 12-volts styrsignaler Цифровой вход и выход 12-В триггерного сигнала Computer
Figure 5 : Balanced (XLR) Inputs Connection Entrées symétriques (XLR) connexion Anschlussdiagramm (symmetrische (XLR-) Eingänge) Conexión de Entradas Balanceadas (XLR) Aansluiting Gebalanceerde ingangen (XLR) Collegamenti ingressi bilanciati (XLR) Balanserade anslutningar (XLR) Балансные (XLR) Входы Подключение Rotel RA-1572MKII Rotel RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E
RA‑1572MKII Stereo Integrated Amplifier Important Notes When making connections be sure to: 4 Turn off all the components in the system before hooking up any components, including loudspeakers. 4 Turn off all components in the system before changing any of the connections to the system. It is also recommended that you: 4 Turn the volume control of the amplifier all the way down before the amplifier is turned on or off.
Contents About Rotel Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Figure 1: Controls and Connections 3 Figure 2: RR‑AX93 Remote Control 4 Figure 3: Analog Inputs and Speaker Output Connections 5 Figure 4: Digital Input and 12 Volt Trigger out Connections 6 Figure 5: Balanced (XLR) Inputs Connections 7 Important notes 8 About Rotel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RA‑1572MKII Stereo Integrated Amplifier 10 Getting Started Thank you for purchasing the Rotel RA‑1572MKII Stereo Integrated Amplifier. When used in a high-quality music audio system, your Rotel product will provide years of musical enjoyment. The RA‑1572MKII is a full featured, high performance component. All aspects of the design have been optimized to retain the full dynamic range and subtle nuances of your music.
wall outlet using the supplied cable or other high current compatible cable as recommended by your authorized Rotel dealer. Do not use an extension cord. A heavy duty multi-tap power outlet strip may be used if it (and the wall outlet) is rated to handle the current demanded by the RA‑1572MKII and all the other components connected to it.
performance, you may want to consider special high-quality speaker cables. Your authorized Rotel dealer can help in the selection of cables for your system. Polarity and Phasing The polarity – the positive/negative orientation of the connections – for every speaker and amplifier connection must be consistent so all the speakers will be in phase. If the polarity of one connection is reversed, bass output will be very weak and stereo imaging degraded.
To temporarily changes the Tone Control Bypass, press the BYPASS C button on the remote control to toggle the Bypass mode enabled and disabled. PC-USB Input r See Figure 4 Bass and Treble Controls 9C Set the Bass or Treble controls from the front panel by pressing the MENU 9 button to toggle to the Tone control menu. Press ENTER 9 button to toggle between BASS and TREB options. Press the - or + 9 button to adjust the value. The Bass and Treble values range from -10 to +10.
RS232 u The RA-1572MKII can be controlled via RS232 for integration with automation systems. The RS232 input accepts a standard straight DB-9 Male-to-Female cable. For additional information on the connections, software, and operating codes for RS232 control of the RA-1572MKII, contact your authorized Rotel dealer. Rotel Link o Rotel Link is not used for RA-1572MKII. EXT REM IN Jack p This 3.5mm mini-jack receives command codes from industry-standard infrared receivers via hard-wired connections.
To enable the continuous power mode select the ALWAYS option. To provide power only when the RA-1572MKII is powered on, select the NORMAL option. The default for USB POWER is set to NORMAL. NOTE: The front panel power button must be in the ON position to supply power to the rear panel USB connector. NOTE: When the USB POWER is configured to ALWAYS the RA1572MKII will consume additional power in standby mode to supply USB power.
RA‑1572MKII Stereo Integrated Amplifier 16 input, the unit will automatically power on. To disable this function, select the OFF option which is the factory default setting. NOTE: When the SIGNAL SENSE function is activated, the RA-1572MKII will consume additional power in signal sense standby mode. NOTE: Due to local power consumption regulations the SIGNAL SENSE function is not available in all markets. • F ACTORY DEFAULT: This sets the unit back to the original state as when it left the factory.
Specifications Maximum Power Output 200 watts/channel, 4 ohms Continuous Power Output 120 watts/channel, 8ohms Total Harmonic Distortion < 0.018% Intermodulation Distortion < 0.03% “Made for iPod,” and “Made for iPhone,” means that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
The Rotel Co. Ltd. Tachikawa Bldg. 1F., 2-11-4, Nakane, Meguro-ku, Tokyo, 152-0031 Japan Rotel USA Sumiko 11763 95th Avenue North Maple Grove, MN 55369 USA Phone: (510) 843-4500 (option 2) E-mail: Rotelsupport@sumikoaudio.net Rotel Canada Kevro International 902 McKay Rd. Suite 4 Pickering, ON L1W 3X8 Canada Tel: +1 905-428-2800 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: + 44 (0)1903 221 710 Fax: +44 (0)1903 221 525 www.rotel.