Installation and Operation Instructions

Octopus10 14/12/20 Page 1 of 3
Introduction:
Baccara Automation & Control congratulates you for purchasing the OCTOPUS Automatic Filter Backwash Controller;
please follow this document for a step-by-step narrated description of the installation, operation, and maintenance
processes of the controller.
The OCTOPUS Automatic Filter Backwash Controller is designed to control the backwash process of an up to ten-unit
filtration batteries, that operate in agricultural, waterworks, Industrial and other non-hazardous environments,
within the pressure and temperature framework described in the specification table.
Safety Instructions: (Draft 14/12/20)
General:
❖ Prior to installation, operation, maintenance or any other type of action carried out on the Octopus Automatic Filter Backwash Controller,
read the safety, installation and operation instructions carefully.
❖ The Octopus Automatic Filter Backwash Controller operates as part of larger irrigation systems; therefore, it is essential to comply with all
the safety instructions and standards relevant to the whole irrigation system.
❖ During installation, operation, or maintenance of the controller all conventional, general and local safety instructions should be observed in
order to avoid danger to the workers, the public or to property in the vicinity.
❖ Always use personal safety gear such as gloves, full coverage clothes, helmet, and safety goggles.
❖ When installing or servicing the Octopus Automatic Filter Backwash Controller, use only standard and adequate tools.
❖ The Octopus Automatic Filter Backwash Controller must be used with non-hazardous liquids.
❖ The filtration battery controlled by the Octopus Automatic Filter Backwash Controller enters to backwashing mode automatically without
warning.
❖ No change or modification to the equipment is permitted without a written notification given by Baccara Automation & Control.
❖ Always observe standard safety instructions and good engineering practices whilst working in the filtration system vicinity.
❖ Use the Octopus Automatic Filter Backwash Controller only for its intended use, as designed by the manufacturer, any misuse of the
controller may lead to undesired damage and may affect your warranty coverage.
Preparation to Installation:
❖ Shipping and transporting the Octopus Automatic Filter Backwash Controller must be done in a safe manner and in accordance with the
relevant standards and regulations.
❖ Electrical wiring should be performed by an authorized electrician only, using standardized and approved components and tools. Locate the
Octopus Automatic Filter Backwash Controller where direct water splashing on the electrical components of the controller is avoided.
Prevent electrification; when using an external power, appropriate external fuse and wires gauge are required.
❖ Install the Octopus Automatic Filter Backwash Controller where the filtration battery can be clearly seen from its installation point.
Installation:
❖ Install the Octopus Automatic Filter Backwash Controller according to the detailed Installation Instructions provided with it and according
to the description given in this manual.
❖ Leave enough clearance around the Octopus Automatic Filter Backwash Controller for easy access for safe maintenance.
❖ Ensure easy and safe access to the Octopus Automatic Filter Backwash Controller without climbing on pipes or equipment. Make sure that
any access equipment is built, installed and used in accordance with the relevant local regulations and standards.
First Startup:
❖ Carefully observe the First Start-up operation instructions prior to the first operation of the Octopus Automatic Filter Backwash Controller.