Installation Guide

Model: 701732

Erecting Tool

Parameters that

Installation steps

2.Hang the Mirror

1.Fix the mirror

the mirror with a damp cloth to avoid increasing the

moisture pouring in;

2. Keep the mirror away from salt, grease and acid,

which can corrode the mirror;

3. The mirror should be wiped with soft dry cloth or

cotton to prevent the mirror from being brushed;

or wax to wipe;

5. Wipe the mirror and picture frame with a rag dipped

in milk to make it clear and bright;

6. Before washing bath, soap can be daubed mirror, then

liquid film, can prevent mirror blur;

7. Dip in a dry cloth with proper amount of detergent and

smear it on the mirror surface, evenly wipe it off.

The active ingredients in the detergent,

8. Astringent toner or detergent can also be used;

9. Use oil absorbent paper to rub.

1. Do not touch the mirror with wet hands or

wipe the

4. Use soft cloth or emery cloth, dip in some kerosene

wipe with dry cloth, the mirror on the formation of a soap

1.2"

39.4"

2.8"

7.9"

2.8"

26.0"

28.7"

1.4"

31.5"

2.8"

36.0"

30.5"