AY-B9350 Professional Fingerprint Reader User Manual
Copyright © 2019 by Rosslare. All rights reserved. This manual and the information contained herein are proprietary to ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to use the information. No part of this manual may be re-produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of ROSSLARE.
AY-B9350 User Manual Table of Contents Table of Contents .................................................................................................... 3 1. Checking Before Use ........................................................................................... 5 1.1. Safety Precautions................................................................................................. 5 1.2. Reader Layout ........................................................................................
AY-B9350 User Manual 4 3.7. Terminal Setting ................................................................................................... 46 3.7.1. Sound ........................................................................................................... 46 3.7.2. Terminal Option ............................................................................................ 47 3.7.3. Input setting ..................................................................................................
AY-B9350 User Manual 1. Checking Before Use 1.1. Safety Precautions Warning Do not operate the device with a wet hand. Do not allow liquid such as water into the device . -> It can cause failure, electric shock. Do not device heat source near the device. -> It can cause fire. Do not randomly disassemble, repair or remodel. -> It can cause failure, electric shock or fire. Keep children away from the device. -> It can cause children’s safety accident or failure.
AY-B9350 User Manual 6 How to use touch screen To select the function you want, touch lightly with your fingertip. When the touch is recognized, the color of button or icon will be temporarily reversed and return to the original color. Touch screen operates by recognizing human body’s tiny current (capacitive), so you must use your fingertip (do not use fingernails). [Caution] - Do not let anything with electricity flow touch the touch screen.
AY-B9350 User Manual 1.2.
AY-B9350 User Manual 1.3. Screen Information during Operation ① Connection state with the server ② Current state of the entrance ③ Warning signals such as terminal separation ④ Fire sensor Menu button Current time ID input button Entrance mode selection button (Indication of the state of the entrance) User guidance message Camera movie display Face registration location guide 1.3.1.
AY-B9350 User Manual 1.3.2.
AY-B9350 User Manual - Pass back error occurred when anti-pass back function is used. - No response from the server while trying authentication. - Network to the server is disconnected while trying authentication.
AY-B9350 User Manual - Waiting for password input - Waiting for fingerprint input - Waiting for card input - Upgrading terminal program (Do not turn OFF terminal power when this message is displayed.) 1.4. Voice Information during Operation Division Voice information When authentication is successful You are authenticated. When authentication failed Please try again.
AY-B9350 User Manual 1.5. Buzzer Sound Information during Operation Beep Reading Fingerprint A card is read. or card fingerprint is input in the fingerprint window Beep, beep Verification failed Long beep Verification successful Authentication is failed is Authentication is succeeded 1.6. Correct Face Registration and Authentication Method Face registration method - Maintain distance between terminal and face to be about 50 cm. (Place face into the guide line in the LCD screen.
AY-B9350 User Manual 13 - Make sure the terminal is installed indoor. - Do not install the device under lighting with incandescent lamp. - It is not recommended that installation in environment exposed to backlight or direct rays of the sun. 1.7. How to Register and Input Correct Fingerprint Correct fingerprint input method If possible, input index finger as like to imprint thumbmark. Slight contact of fingertip is not a correct register/input method.
AY-B9350 User Manual 14 If hands are too dry, blow user’s breaths on the fingerprint for easy use. In case of children, If fingerprint is too small or too tender, sometimes use is difficult or impossible. It is needed to newly register fingerprint every 6 months. In case of the old, if there are too many crackles on the fingerprint to be registered, it can be hard to register fingerprint. If possible, it is recommended that more than 2 fingerprints of a user are registered.
AY-B9350 User Manual 2. Introduction 2.1. Features Multi-Modal product which can use both of face and fingerprint authentication functions. Tilting camera automatically trace face position. Since an illuminance sensor and a Dual Camera (Color & IR) are installed, face recognition is impossible even in a dark place. Save log image which can be recognized. Can be used along with RF Card (EM Card; 125 kHz) and Smart Card (MIFARE Card; 13.56MHz) simultaneously.
AY-B9350 User Manual 2.2.2.
AY-B9350 User Manual 2.3. Product Specification Division SPEC CPU 1GHz Quad Core CPU LCD 5.
AY-B9350 User Manual 3. Configuration 3.1. Check Points before Configuration 3.1.1. Entering Menu Press [ ] icon in the main screen to access into the main menu screen below. Press the relevant button to move to each sub menu. 3.1.2. Administrator Authentication If an administrator is registered, the following administrator authorization screen will be displayed first.
AY-B9350 User Manual 3.1.3. Enter Menu without Administrator Authorization The method is to enter the menu when an administrator lost registered administrator card which is registered at the terminal or when fingerprint or face verification is impossible because there is no administrator.
AY-B9350 User Manual 1. User 1. Add management 2. Change 3. Delete 4. Delete All 5. Search 2. Network Terminal IP address Static IP / DHCP ▶ Terminal IP address ▶ Subnet Mask ▶ Gateway DNS server ▶ DNS server1 ▶ DNS server2 Server IP address ▶ Server IP address ▶ Port Terminal ID ▶ Terminal ID 3. Operation 1. Function mode setting 4. System 1.
AY-B9350 User Manual ▶ Set Date ▶ Set Time 5. Database 1. 2. 3. 4. 5. 5. Terminal 1. Sound setting Delete all users Delete setting Delete Log Delete image log Factory Init ▶ Voice volume ▶ Buzzer volume □ User Voice 2. Terminal option ▶ Read Card Number ▶ Card format □ Lock Terminal ▶ Card reader: Standard HID-iCLASS (option) 3. Input setting ▶ M0 ▶ M1 ▶ M2 ▶ IO ▶ Warn door open (sec) □ Tamper alarm 4. Lock setting ▶ ▶ ▶ ▶ 5.
AY-B9350 User Manual 7. Terminal 1. System information 8. SD card ▶ System information ▶ Disk ▶ RAM 2. Terminal ▶ Terminal information Terminal ID Application Language 3. Network ▶ Network info MAC IP 4. User ▶ User 5. Log ▶ Log 6. About ▶ About 1. Export 1. 2. 3. 4. 5. 2. Import 1. User data 2. System option 3. Others 1. Theme 2. F/W upgrade User data Event log System option Export all Picture 3.3.
AY-B9350 User Manual Input user ID to be registered and press [OK] button. In this case, ID which can be registered is automatically displayed in the screen. Hence, registration is easy and convenient. To change ID, ] button to delete the existing value and Press [ to input a new one. Press [BACK] button to cancel and move out. If an already registered ID is input, failure message will be displayed. If it is an unregistered ID, the screen below will be displayed. Each icon has the following meaning.
AY-B9350 User Manual 3.3.1.1. Registering Picture Press [ picture. ] button in [Add user] screen to register a Press [Save] button to register current camera image as a picture. To cancel registration and move out, press [Cancel] or [BACK] button. 3.3.1.2. Registering Name Press [Name] button in [Add user] screen to register a name. Input name using the keyboard displayed below and press OK button. Up to 29 characters can be input for name. To cancel registration and move out, press [ ] button.
AY-B9350 User Manual 25 3.3.1.3. Registering Fingerprint ① Press [Fingerprint] button in [Add user] screen to register. To cancel registration and move out, press [ ] button. When the left screen is displayed, select a finger to be registered. ※ In case of registering many fingers, already registered finger will be displayed in blue circle ( ). If an already registered finger is selected, the following message will be displayed.
AY-B9350 User Manual 26 ④ Message on the left will be displayed when input is completed. Press [OK] button to complete registration and move to the upper menu. To register fingerprint again, press [Retry] button to start it again from the process of ② above. To cancel it, press [ ] button to move to upper menu. If a fingerprint is similar with an already registered fingerprint, message of “similar with an already registered fingerprint” will be displayed as shown on the left.
AY-B9350 User Manual 3.3.1.4. Registering Face Register face referring to ‘1.6 Correct face registration and authentication method‘. Press [Face] button in [Add user] screen to select [Regular Registration] or [Quick Registration]. To cancel registration, press [BACK] button. * In case of general registration, register face through 5 steps after fixing face and pose according to the guideline.
AY-B9350 User Manual 28 ③ As shown in the left screen, if face is normally recognized, guide line will be changed into green to start registering face. At this point, do not move face and stand still for easy registration. ④ Move face to front/up/down little by little whenever information message is displayed in the screen. At this point, do not move more than 15 degree. After registering face, message of “completed” will be displayed as shown in the left screen.
AY-B9350 User Manual 3.3.1.5. Registering Password Input 4~8 digit password in password input window and press [OK] button to move input focus to ‘password check’ window below. Input the same password again and press [OK] button. To cancel and move out, press [ ] button. ※ If wrong password is input after checking password input, message of “Check input value” will be displayed as below. 3.3.1.6. Registering Card Press [Card] button in [Add user] screen to register a card.
AY-B9350 User Manual 3.3.1.7. Authentication Option ▶ ’Fingerprint verification level’ (Default setting: ‘0’) This item is to decide fingerprint verification level for each user. Authentication level for each registered user can be changed by change this value. If it is set to ‘0’, authentication will be done using 1 to 1 fingerprint verification level at the terminal.
AY-B9350 User Manual 3.3.1.9. Saving After completing all registering processes, press [Save] button. At this point, if [Cancel] or [BACK] button is pressed without pressing [Save] button, the user won’t be saved. The following shows LCD messages which can be displayed during registering processes.
AY-B9350 User Manual During [Register Fingerprint] Not same fingerprint but different fingerprint is input during fingerprint registration During [Register Fingerprint] Already registered fingerprint is tried to be registered again (However, same fingerprint input with same user ID is possible.) ※ To register same fingerprint with another different ID, ‘System fingerprint recognition prevention of registration of similar fingerprint’ function must be released.
AY-B9350 User Manual 3.3.2. Deleting Select [User management] [Delete] in the main menu to display the screen below Input user ID to be deleted and press [OK] button. Press [BACK] button to cancel and move out. Failure message of “unregistered user” will be displayed in the screen when unregistered ID is input, and success message of “deleted” will be displayed when registered ID is input. However, it is not deleted from the server even when it is deleted from the terminal.
AY-B9350 User Manual Operation is under Network mode but the terminal is not connected to the server. 3.3.3. Changing Select [User management] [Modify] in the main menu to display the screen below. Input user ID to be changed and press [OK] button. Press [BACK] button to cancel and move out. If an unregistered ID is input, failure message will be displayed. If a registered ID is input, information of the registered user will be displayed as below.
AY-B9350 User Manual Since the method to change each item is same with that for user add, refer to ‘3.3.1. Add’. 3.3.4. Deleting All Select [User] [Delete All] in the main menu to display the screen below To really delete all users, press [Yes]. To cancel it, press [No] ※ If [Yes] is selected, all users and administrators will be deleted. Recovering after deleting is impossible. Hence, it should take extra care.
AY-B9350 User Manual 36 3.3.5. Searching Select [User] [View] in the main menu to search the list of all registered users as below. User list will be displayed in the order of ID. Scroll down screen to search following user lists. List will be displayed by 100 persons unit. If there are more than 100 persons, press [BACK] or [NEXT] button below to search the previous or the next list. ▶ [ID]: Touch ID of a specific user to directly move to the screen to change it.
AY-B9350 User Manual ▶ [Name]: Press the button and input user name to display registered user list with the name in which input character string is included. Press [BACK] button in this screen to move to ‘3.3. User management’ menu. Ex) In case of searching with “test2”, all users who have “test2” in their names will be searched as shown in the left screen. 3.4. Network Setting Select [network] in the main menu to display the screen below.
AY-B9350 User Manual Touch a desired item to be changed to display keypad. After completing input for the relevant item using the keypad, touch [ ] button or the next input window to continue input. After completing input, touch not input window but background to close the keypad. Press [OK] button to apply the changed value after setting. To cancel it, press [BACK] button to move to upper menu. 3.5. Operation Mode Select [Application] in the main menu to display the screen below.
AY-B9350 User Manual 3.6. System 3.6.1. System Select [System] [System] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Length of user ID This part is to set the length of user ID. It can be changed to 4~ 20-digit ID and it must be same with the length of registered ID at the server program. If ID registered at the server program uses 6-digit ID of ‘000075’, set it to ‘6’.
AY-B9350 User Manual 40 3.6.2. Fingerprint Recognition Select [System] [Fingerprint recognition] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ 1 to N level (3~9) This authentication level is used for 1 to N fingerprint verification. Since authentication level for each user is not set for 1 to N identification, it is always based on the authentication level of the terminal.
AY-B9350 User Manual 3.6.3. Face Recognition ▶ Default setting: same with the setting in the left screen ▶ Face Authentication Press the check box to enable the function. ▶ Matching Level Level used for face authentication. It is set to 1~4 of steps according to match degree with registered face. Match degree must be higher than the setting authentication level for successful authentication. The higher the authentication level, security can be the higher.
AY-B9350 User Manual 3.6.4. Setting Current Time Select [System] [Date/time] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Display format This is to set the method to display the current time of the terminal. - yyyy-mm-dd: displayed in the order of year, month, day - dd-mmm-yyyy: displayed in the order of day, month (English), year ▶ Set Date/Set time This is to change the current time of the terminal.
AY-B9350 User Manual 3.6.6. Database Select [System] [Database] in the main menu to display the screen below. To delete all users, press [Delete all users] button. To reset the setting value, press [Delete setting] button. To reset authentication record, press [Delete Log] button. To delete only image log, press [Delete image log] button. To delete the whole data to make the device to factory setting status, press [Factory Init] button. Press [Close] or [BACK] button to move to upper menu. 3.6.6.1.
AY-B9350 User Manual 44 after deleting. 3.6.6.2. Setting Delete Select [System] [Database] [Delete setting] in the main menu to display the screen below. To reset all setting values, press [Yes] button, or press [No] or [ ] button to cancel it. If nothing is input for 5 seconds in this status, message box will be closed without resetting.
AY-B9350 User Manual 3.6.6.4. Image Log Delete Select [System] [Database] [Delete Image log] in the main menu to display the screen below. To delete all image logs saved at the terminal, press [Yes] button, or press [No] or [ ] button to cancel it. If nothing is input for 5 seconds in this status, message box will be closed without delete. Success message will be displayed when successfully deleted by pressing [Yes].
AY-B9350 User Manual 3.7. Terminal Setting 3.7.1. Sound Select [Terminal] [Sound] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Voice volume Scroll to the left/right in 0~15 steps to set voice ] button on the right to play voice in size. Press [ order to check voice volume. ▶ Beep volume Scroll to the left/right in 0~3 steps to set buzzer ] button on the right to make sound size. Press [ buzzer sound in order to check buzzer sound volume.
AY-B9350 User Manual 3.7.2. Terminal Option Select [Terminal] [Option] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Read Card number Touch a card on this screen to display card No on the LCD. Card No according to the setting value can be searched by changing [card format]. ▶ Lock terminal The function is directly lock or unlock the terminal by an administrator not from the server program but at the terminal.
AY-B9350 User Manual 3.7.3. Input setting Select [Terminal] [Input] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ M0: Set this to connect an external contact to DM0. (If motor lock is used, set it to [door open status NO] or [door open status NC].) - Not use: Select this when nothing is connected. - Door open status NO or door open status NC: when door open status monitoring pin is connected.
AY-B9350 User Manual and monitoring pin of the Lock must be also connected to M0. In addition, M0 must be set to [door open status NO] or [door open status NC] as well. ▶ Tamper Alarm If this is checked ( ), warning sound will be made when the terminal is disassembled. To apply the setting value, press [OK] button, or press [BACK] button to cancel and to move to the upper menu. 3.7.4. Lock Setting Select [Terminal] [Lock] in the main menu to display the screen below.
AY-B9350 User Manual To apply the setting value, press [OK] button or press [BACK] button to cancel and to move to the upper menu. 3.7.5. External Terminal Setup If you select the [Terminal]->[External device] in the main menu, the following window appears. ▶ Basic setting : Same with the window at the left side. ▶Site code It sets the sitecode value sent in Wiegand output below. ▶Wiegand Output It is used only when the special controller is equipped running by the Wiegand input.
AY-B9350 User Manual User definition It is set by the user definition, which only can be set in the server, and the setting type only can be inquired in the terminal. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. 3.8. Display Setting 3.8.1. Theme Select [Display] [Theme] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Main background This is to set background of the main screen.
AY-B9350 User Manual ▶ Default setting: same with the setting in the left screen ▶ Display option This is to select image displayed in authentication success message window. - None - Registered photo ▶ Save success log ), capture camera image and If this is checked ( save it as an image log when authentication is successful. ▶ Save failed log ), capture camera image and If this is checked ( save it as an image log when authentication failed.
AY-B9350 User Manual 3.8.4. LCD Option Select [Display] [Option] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Screen saver (5 seconds ~ 10 minutes) If nothing is input for the setting time, the screen will be automatically OFF. However, LCD will be always ON if it is set to ‘None’. ▶ Display option This is to set detail to be displayed when authentication is successful.
AY-B9350 User Manual To apply the setting value, press [OK] button or press [BACK] button to cancel and to move to the upper menu. 3.9. Terminal Information 3.9.1. System Information Select [Terminal info] [System] in the main menu to display the screen below. ▶ System info This is to display hardware and firmware version of the terminal. ▶ Disk (amount used/total) This is to display amount of used storage space. If amount of used storage space is getting too much, it will be displayed in red.
AY-B9350 User Manual 3.9.2. Terminal Information Select [Terminal info] [Terminal] in the main menu to display the screen below. ▶ Terminal info This is to display option setting value of the terminal. To move to upper menu after searching, press [Close] or [BACK] button. 3.9.3. Network Information Select [Terminal information] [network] in the main menu to display the screen below. ▶ Network info This is to display network setting value of the terminal.
AY-B9350 User Manual 3.9.4. User Information Select [Terminal info] [User] in the main menu to display the screen below.
AY-B9350 User Manual ▶ Log search Press [Terminal info] [Log] -> [View Log] -> [Log Search] button to set start date, end date, event condition and press [OK] button to search log. ▶ Search result Log search result is to check information of date, time, ID, authentication result (successful or failed). Press [BACK] or [NEXT] button to check search information. To move to upper menu after searching, press [Close] or [BACK] button.
AY-B9350 User Manual 3.9.6. About Select [Terminal info] [About] in the main menu to display the screen below. ▶ About License information of Korean font applied to the terminal will be displayed. To move to upper menu after searching, press [Close] or [BACK] button. 3.10. SD Card Select [SD card] in the main menu to display the screen below. < When SD card is not inserted,> ※ This can be done only when SD card is inserted.
AY-B9350 User Manual card must be over side down. (Only SD card with capacity below 32G can be used.) This function is to backup data of the terminal using [EXPORT]. Data backed up by [IMPORT] can be copied back to the terminal. ▶ Export This is to copy the relevant data from the terminal to an external SD card. - User data: copy user DB into ‘eNBioAccessT9/terminal ID/user/today’s date’ folder in the SD card.
AY-B9350 User Manual 60 This is to copy the relevant data from a SD card to the terminal - User data: Copy user data of *.ndb file name from ‘eNBioAccessT9/user’ folder in the SD card to the terminal. - System option: Copy option setting values of the terminal saved in the SD card (‘eNBioAccessT9/config’ folder) by exporting to the terminal. To apply a new DB or setting value when import is performed, the terminal must be rebooted.
AY-B9350 User Manual 4. How to use Terminal Background image and configuration in the main screen can be changed according to the setting by an administrator. In addition, if screen saver time is set by the administrator, LCD screen will be automatically OFF if nothing is operated at the terminal for the designated time. when a user approach the terminal, when authentication is tried with something like fingerprint/card or when the main screen is touched, the LCD screen will be automatically activated.
AY-B9350 User Manual 62 Press desired access mode button in access mode selection screen in the left to close selection screen and to convert mode in the main screen into the relevant mode. 4.2. ID Input Press [Input ID] button in the main screen to display the following ID input window. Input user ID and press [OK] button to display fingerprint input, face input, card input or password input screen according to Authentication Method of a user.
AY-B9350 User Manual 4.3. Authentication 4.3.1. Face Authentication ▶ 1 to N identification Set face position until guide line is changed to green, look at the camera when the guide line becomes green and then stop movement for a moment to proceed with authentication. ▶ 1 to 1 verification As shown in the figure below, press [ID input] button to input ID first.
AY-B9350 User Manual ▶ Authentication while loading fingerprint data The saved fingerprint data of all users will be loaded to the memory for 1 to N identification during terminal booting. Progress will be displayed during loading in the top left of the screen as below. Server 1 to N identification will be tried if server authentication is included among the authentication methods at the terminal when 1 to N fingerprint verification is requested by a user during loading.
AY-B9350 User Manual 4.3.3. Card Authentication Put the card on the card input part in
AY-B9350 User Manual 66 Appendix 1 Glossary Admin, Administrator - A user can enter terminal menu mode. Administrator means a person who can register/modify/delete user and can change the setting of terminal. - If there is no a registered administrator for the terminal, anybody can access to terminal menu and change the setting.
AY-B9350 User Manual 67 Appendix 2 Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference. - This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
AY-B9350 User Manual 68 Appendix 3 Radio Equipment Directive (RED) Rosslare hereby declares that the AY-B9350 is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.
AY-B9350 User Manual 69 Appendix 4 RoHS Directive Under our sole responsibility that the following labeled AY-B9350 is tested to conform to the Restriction of Hazardous Substances (RoHS) directive – 2011/65/EU – in electrical and electronic equipment.
AY-B9350 Asia Pacific, Middle East, Africa Latin America Rosslare Enterprises Ltd. Kowloon Bay, Hong Kong Tel: +852 2795-5630 Fax: +852 2795-1508 support.apac@rosslaresecurity.com Rosslare Latin America Buenos Aires, Argentina support.la@rosslaresecurity.com China Rosslare Electronics (Shenzhen) Ltd. Shenzhen, China Tel: +86 755 8610 6842 Fax: +86 755 8610 6101 support.cn@rosslaresecurity.com United States and Canada Rosslare Security Products, Inc.