AY-B91x0BT Professional Fingerprint Readers User Manual Models: AY-B9120BT AY-B9150BT
Copyright © 2019 by Rosslare. All rights reserved. This manual and the information contained herein are proprietary to ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to use the information. No part of this manual may be re-produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of ROSSLARE.
AY-B91x0BT User Guide Table of Contents Table of Contents ..................................................................................................................... 3 1. Before Getting Started ........................................................................................................ 4 1.1. Safety Notes ............................................................................................................................................4 1.2. Product Details ................
AY-B91x0BT User Guide 1. Before Getting Started 1.1. Safety Notes Warning Do not operate the terminal with wet hands, and pay Keep the terminal away attention not to let any liquid from inflammables. enter inside the terminal. → Otherwise, it may cause → Otherwise, malfunction a fire. or electric shock may be caused. Do not disassemble, repair or Do not allow children to remodel the terminal at your touch the terminal disposal. carelessly.
AY-B91x0BT User Guide 1.2.
AY-B91x0BT User Guide 1.3. LED signals displayed during operation ● ● ● Lighting Flickering Lighting Flickering : Normal status : When the input of fingerprint and card user is on standby : Light up for 1 second upon successful authentication. : Flicker at one second interval when FW is downloaded and when an administrator application is entered. Lights out : Normal status Lighting : Light up for one second when authentication fails.
AY-B91x0BT User Guide 7 Make sure that the fingerprint is clear and not wounded. Too dry, wet, blurry or wounded fingerprints are difficult to recognize. In this case, the fingerprint of another finger should be registered. Precautions subject to your fingerprint status The availability of the fingerprint may vary subject to your fingerprint status. This product consists of a fingerprint recognition system and cannot recognize damaged or unclear fingerprints.
AY-B91x0BT User Guide 8 2. Product Description The AY-B91x0BT series of professional-grade fingerprint readers include a high-speed optical sensor with a capacity of 20,000 templates featuring powerful algorithms with liveness check and encrypted data storage. The readers include BLE connectivity that integrates to Rosslare BLE-ID™ and BLE-Admin™ applications, and have RS-485, TCP/IP and Wiegand 26-Bit and 34-Bit connectivity.
AY-B91x0BT User Guide 2.2. Configuration Diagram 2.2.1. Standalone Use (Access) 12 V Unique Adapter Electrical Lock (Lock+, Lock-, Monitor) 2.2.2.
AY-B91x0BT User Guide 3. Environment Setting 3.1. Terminal Setting 3.1.1. Setting via Rosslare Bio9000 Card Format The type of card to be used can be set. Settings No Use EM MIFARE Display Method Do not use the card authentication Use a low-frequency (125 kHz) EM card Use a high-frequency (13.56 MHz) MIFARE card Wiegand Output This mode is available if the terminal is equipped with a separate controller operated by Wiegand input.
AY-B91x0BT User Guide 11 Terminal IP Set the terminal IP. Server IP When the terminal is used in conjunction with Rosslare Bio9000, set the server IP. Subnet Mask Set the subnet mask value of the terminal. Gateway Set the gateway value of the terminal. Port No. Set the Rosslare Bio9000 Server port to 2000-65535. (Default: 7332) Network Timeout Set the communication cycle time between the Rosslare Bio9000 server and the terminal to the range of 2-20.
AY-B91x0BT User Guide 12 3.1.2. To set the terminal IP via Rosslare Bio9000 By running terminal search items in the terminal management menu of Rosslare Bio9000, perform the setting of terminal IP. When clicking the Search button on the above screen, the unregistered terminals appear as shown below.
AY-B91x0BT User Guide 13 When clicking the “...” button, the detailed setting screen appears as shown below. To change the terminal ID and network settings, select the terminal to set, enter the change value, and click the “Modify IP” button. Then, you can check that the terminal value has been changed. Set Terminal ID and Terminal Network and then click the “Request Connect” button at the bottom, and the terminal appears as the unregistered status on the screen.
AY-B91x0BT User Guide 14 4. How to Use Terminal 4.1. Authentication 4.1.1. Fingerprint Authentication Place your finger on the fingerprint sensor. The fingerprint sensor lights on and receives fingerprint input. Keep your finger on the fingerprint sensor until the light turns off completely. 4.1.2. Card Authentication Place the card on the card sensor of the terminal. 4.1.3.
AY-B91x0BT User Guide 15 5. Troubleshooting 5.1. When the fingerprint authentication time is too long or fails: When the terminal operates by the 1:N (Server) authentication in the network mode, if the server is used for personal or business use, a server load may reduce the fingerprint recognition rate and require the long fingerprint authentication time. It is recommended to build a dedicated server. Check that there are no scratches or foreign matter on your finger or FP sensor.
AY-B91x0BT User Guide 16 5.6. When the user is not registered: This product is set by default to operate as a network mode. If the connection is abnormal in the network mode, the user cannot be registered. Check the network connection status. 5.7. When the product is unstable or does not work: Select the terminal in the terminal management menu of Rosslare Bio9000, click the right mouse button, and select the [terminal Restart] item. The terminal restarts.
AY-B91x0BT User Guide 17 Appendix 1. Glossary Administrator (Admin) - The administrator can access the terminal menu mode. He/she has the authority to add/modify/delete terminal users and to change the operating environment by changing settings. - If there is no registered administrator in the terminal, anybody can access the terminal menu and change settings. It is recommended that more than one administrator be registered in the terminal.
AY-B91x0BT User Guide 18 Appendix 2. Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
AY-B91x0BT User Guide 19 Appendix 3. Radio Equipment Directive (RED) Rosslare hereby declares that the AY-H6355BT is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.
AY-B91x0BT User Guide 20 Appendix 4. RoHS Directive Under our sole responsibility that the following labeled AY-U9xxBT is tested to conform to the Restriction of Hazardous Substances (RoHS) directive – 2011/65/EU – in electrical and electronic equipment.
AY-B91x0BT Asia Pacific, Middle East, Africa Latin America Rosslare Enterprises Ltd. Kowloon Bay, Hong Kong Tel: +852 2795-5630 Fax: +852 2795-1508 support.apac@rosslaresecurity.com Rosslare Latin America Buenos Aires, Argentina support.la@rosslaresecurity.com China Rosslare Electronics (Shenzhen) Ltd. Shenzhen, China Tel: +86 755 8610 6842 Fax: +86 755 8610 6101 support.cn@rosslaresecurity.com United States and Canada Rosslare Security Products, Inc.
