RM5800 User Manual RM5800 User Manual Emerson™ Automation Solutions, Rosemount® Inc Revision B.1 18 March 2022 Revision B.
RM5800 User Manual 1 CONTENTS 1 Purpose ................................................................................................................................................. 3 2 General Information ............................................................................................................................. 3 2.1 3 4 Product Description ......................................................................................................................
RM5800 User Manual 1 PURPOSE This document serves as a user manual for the Emerson Rosemount RM5800 radio module. 2 GENERAL INFORMATION 2.1 PRODUCT DESCRIPTION Rosemount Inc.’s RM5800 WirelessHART 2.4GHz Radio Module has been specifically designed to interface with industrial and process control equipment designed and marketed by the Emerson family of companies. The RM5800 is designed to be fully compliant with the WirelessHART specification. The RM5800 utilizes the global license-free 2.
RM5800 User Manual 3.3 RADIO SPECIFICATIONS Parameter Min Operating frequency 2.4000 Typ Max Units Comments 2.4835 GHz Channel center: 2.440Ghz Number of channels 15 Channel separation 5 MHz Occupied channel bandwidth 2.5 MHz Modulation At –20 dBc IEEE 802.15.
RM5800 User Manual 4 INTEGRATION INSTRUCTIONS 4.1 DESIGN DESCRIPTION The RM5800 connects to a host feature board via 22 pin connectors. Antennas or antenna adapter cables are connected to the radio module via MMCX cable connector. 4.1.1 Device Photo 4.2 INSTALLATION GUIDELINES The RM5800 radio module is only available for use in the Emerson family of products. The RM5800 is not readily available to consumers; it is not sold by retail to the public.
RM5800 User Manual 1. An external label must be provided on the outside of the final product enclosure specifying the FCC identifier as described in 5.1.3 below. 2. The antenna must be electrically identical to the FCC-approved antenna specifications for the RM5800 as described in 5.1.2 with the exception that the gain may be lower than specified in Section 5.1.2. 3.
RM5800 User Manual 5.1.4 FCC Documentation Requirements User documentation must contain the following statements: • • • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must be installed to ensure a minimum antenna separation distance of 20 cm from all persons.
RM5800 User Manual d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences pouvant causer un mauvais fonctionnement du dispositif. 5.3 EU COMPLIANCE The RM5800 has been demonstrated compliance to EN 300 328. Host products are required to demonstrate compliance to EU Radio Equipment Directive (RED) 2014/53/EU and follow all documentation and labeling requirements. Antennas may have a maximum gain of 12dBi. Revision B.
RM5800 User Manual The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount is a mark of one of the Emerson family of companies. All other marks are the property of their respective owners. Revision B.