Emerson™ Location Awareness with WirelessHART® Protocol Reference Manual Rev 1.0 August 2020 Contents Section 1: Introduction .............................................................................................................................................6 1.1 Using This Manual ..............................................................................................................................................6 1.2 Product Recycling and Disposal ........................................
Reference Manual Rev 1.0 August 2020 4.2.2 Field Communicator ................................................................................................................................9 4.3 Power Down .................................................................................................................................................10 Section 5: Location Anchor Installation ..................................................................................................................
Reference Manual Rev 1.0 August 2020 12.2 General Configuration ................................................................................................................................26 12.3 Site Configuration .......................................................................................................................................37 12.4 Asset Configuration ..................................................................................................................................
Reference Manual Rev 1.0 August 2020 Emerson™ Location Awareness Notice Read this manual before working with the product. For personal and system safety and for optimal product performance, understand the contents completely before installing, using, or maintaining this product. Emerson™ has two toll-free assistance numbers and one international number. Customer Central 1 800 999 9307 (7:00 a.m. to 7:00 p.m.
Reference Manual Rev 1.0 August 2020 WARNING Failure to follow these installation guidelines could result in death or serious injury. - Only qualified personnel should perform the installation. Explosions could result in death or serious injury. - Verify the operating atmosphere of the transmitter Anchor & Tag is consistent with the appropriate hazardous location certifications. - The Anchor enclosure has a high surface resistivity that may present a static hazard.
Reference Manual Rev 1.0 August 2020 Section 1: Introduction 1.1 Using This Manual The sections in this manual provide information on installing, operating, and maintaining the Emerson™ Location Awareness solution. The sections are organized as follows: Section 2: Plantweb Insight Location application provides overview on installation. Section 3: Location Anchor Safety Messages contains safety information related to the Location Anchors.
Reference Manual Rev 1.0 August 2020 1.2 Product Recycling and Disposal Recycling of equipment and packaging should be taken into consideration and disposed of in accordance with local and national legislation/regulations. Section 2: Install Plantweb Insight and Plantweb Insight Location application Follow instructions in the Plantweb Insight Quick Start Guide. Section 3: Location Anchor Safety Messages 3.
Reference Manual Rev 1.0 August 2020 equipment can be dangerous and could result in injury. Properly dispose of damaged Anchor batteries or Tags immediately. The Emerson Location Anchor shall be used only with the battery (00G45-9000-0001) supplied by Rosemount. This battery has been officially tested with the Location Anchor as required by the I.S. standards during the assessment of the Emerson Location Anchor. The battery is not replaceable in a hazardous location.
Reference Manual Rev 1.0 August 2020 To communicate with the Gateway (and ultimately the host system), the transmitter must be configured to communicate with the wireless network. Using a Field Communicator or AMS Device Manager, enter the network ID and join key so they match the network ID and join key of the Gateway and other devices in the network. If they do not match, the Location Anchor will not communicate with the network.
Reference Manual Rev 1.0 August 2020 Wireless Network ID, Join Device to Network, Broadcast Information 4.3 Power Down After the Location Anchor has been configured, turn power off to the electronics by moving the power switch to off and reinstall the cover. Power should only be turned back on when the Anchor is ready for commissioning. Section 5: Location Anchor Installation 5.1 Considerations 5.1.
Reference Manual Rev 1.0 August 2020 The Emerson Location Anchor is self-powered. The battery is a single “D” size primary lithium/thionyl chloride battery. Each battery contains approximately 5.0 grams of lithium. Under normal conditions, the battery materials are self-contained and are not reactive as long as the battery is maintained. Care should be taken to prevent thermal, electrical, or mechanical damage. Contacts should be protected to prevent premature discharge.
Reference Manual Rev 1.0 August 2020 4. Tighten clamp to 10.2 N-m (90 in-lb) using 5/16” (8mm) socket and torque wrench. 5. Slide Anchor universal connection into pipe mount from above. Anchor should sit in pipe mount with nut loose. 6. Tighten nut hand tight. Anchor should now look below image. Mount off the left side of the pipe with the cover facing you (as shown), if possible. 12 Emerson.
Reference Manual Rev 1.0 August 2020 7. If commissioning the Location Anchor, refer to Location Awareness Quick Start Guide 8. Ensure the cover is fully tightened to prevent moisture ingress. The lip of the polymer electronics cover should be in contact with the surface of the polymer enclosure to ensure a proper seal. Do not overtighten Section 6: Location Anchor Commissioning 6.
Reference Manual Rev 1.0 August 2020 The communication status may be verified in the wireless device using the following the menu items. Function Communications Menu Items Join Status, Wireless Mode, Join Mode, Number of Available Neighbors, Number of Advertisements Heard, Number of Join Attempts 6.1.2 Wireless Gateway Using the Gateway’s web interface, navigate to the Devices page as shown in Figure 6-1. Locate the device in question and verify all status indicators are good (green). Figure 6-1.
Reference Manual Rev 1.0 August 2020 Note: Plantweb Insight™ Location application is provided for viewing Location Anchor status. Troubleshooting: If the device is not joined to the network after power up, verify the correct configuration of the network ID and join key, and that Active Advertising has been enabled on the Gateway. The network ID and join key in the device must match the network ID and join key of the Gateway.
Reference Manual Rev 1.0 August 2020 6.1.3 Field Communicator Note: In order to establish communication with a Field Communicator, power the Location Anchor by switching the power switch to the “ON” position. Function Guided Setup Wireless 16 Menu Items Basic Setup, Join Device to Network, Configure Update Rates, Network ID, Join Device to Network, Broadcast Information Emerson.
Reference Manual Rev 1.0 August 2020 Section 7: Location Anchor Operation and Maintenance This section contains information on commissioning and operating Location Anchors. Field Communicator and AMS™ Device Manager instructions are provided for convenience. 7.2 Battery Replacement The Emerson Location Anchor shall be used only with the battery (00G45-9000-0001) supplied by Rosemount. The battery is not replaceable in a hazardous location. Procedure to replace the battery: 1.
Reference Manual Rev 1.0 August 2020 Response Center using the 1-800-654-RSMT (7768) toll-free number. This center, available 24 hours a day, will assist with any needed information or materials. The center will ask for product model and serial numbers and will provide a Return Material Authorization (RMA) number. The center will also ask for the process material to which the product was last exposed.
Reference Manual Rev 1.0 August 2020 Muster mode activated Status Notification Voltage Conditions Out of Range Environmental Conditions Out of Range Maintenance Status Failure The device is placed into a mode where it is not forwarding information to calculate full position Description The supply voltage is low and may soon affect device operation. The device is outside its normal environmental operating conditions which may affect accuracy and/or proper operation.
Reference Manual Rev 1.0 August 2020 indicated by a warning symbol ( ). Refer to the following safety messages before performing an operation preceded by this symbol. WARNING Location Awareness Tags and Anchors use lithium batteries and are subject to local, state, national, and/or international requirements. Lithium batteries may ignite, explode or release toxic and harmful materials or chemicals if mishandled. Do not use a battery that is damaged. Do not incinerate batteries.
Reference Manual Rev 1.0 August 2020 Section 11: Personnel Tag Operation and Maintenance 11.1 Personnel Tag Status and Notifications The flashing LED Location Tag status using the colors described in table 12.1. To see the LED, remove the enclosure cover. Table 11.1. Personnel Tag LED Status Descriptions LED Color Blink rate 1 blink per second Green Device status Normal operation Green/Red Toggle blink Amber 1 blink per 0.
Reference Manual Rev 1.0 August 2020 11.4 Personnel Tag Mounting Considerations The Personnel Tag has flexible wearing options to accommodate a variety of PPE. It can be worn with a lanyard or belt clip. Lanyards are shipped with the Personnel Tags. Belt clips can be ordered separately. 22 Emerson.
Reference Manual Rev 1.0 August 2020 Section 12: Plantweb Insight Location Application Configuration 12.1 Gateway Configuration 23 Emerson.
Reference Manual Rev 1.0 August 2020 24 Emerson.
Reference Manual Rev 1.0 August 2020 25 Emerson.
Reference Manual Rev 1.0 August 2020 12.2 General Configuration 26 Emerson.
Reference Manual Rev 1.0 August 2020 27 Emerson.
Reference Manual Rev 1.0 August 2020 28 Emerson.
Reference Manual Rev 1.0 August 2020 29 Emerson.
Reference Manual Rev 1.0 August 2020 30 Emerson.
Reference Manual Rev 1.0 August 2020 31 Emerson.
Reference Manual Rev 1.0 August 2020 32 Emerson.
Reference Manual Rev 1.0 August 2020 33 Emerson.
Reference Manual Rev 1.0 August 2020 34 Emerson.
Reference Manual Rev 1.0 August 2020 35 Emerson.
Reference Manual Rev 1.0 August 2020 36 Emerson.
Reference Manual Rev 1.0 August 2020 12.3 Site Configuration 37 Emerson.
Reference Manual Rev 1.0 August 2020 38 Emerson.
Reference Manual Rev 1.0 August 2020 39 Emerson.
Reference Manual Rev 1.0 August 2020 40 Emerson.
Reference Manual Rev 1.0 August 2020 41 Emerson.
Reference Manual Rev 1.0 August 2020 42 Emerson.
Reference Manual Rev 1.0 August 2020 43 Emerson.
Reference Manual Rev 1.0 August 2020 44 Emerson.
Reference Manual Rev 1.0 August 2020 45 Emerson.
Reference Manual Rev 1.0 August 2020 46 Emerson.
Reference Manual Rev 1.0 August 2020 47 Emerson.
Reference Manual Rev 1.0 August 2020 48 Emerson.
Reference Manual Rev 1.0 August 2020 49 Emerson.
Reference Manual Rev 1.0 August 2020 50 Emerson.
Reference Manual Rev 1.0 August 2020 51 Emerson.
Reference Manual Rev 1.0 August 2020 52 Emerson.
Reference Manual Rev 1.0 August 2020 53 Emerson.
Reference Manual Rev 1.0 August 2020 54 Emerson.
Reference Manual Rev 1.0 August 2020 12.4 Asset Configuration 55 Emerson.
Reference Manual Rev 1.0 August 2020 56 Emerson.
Reference Manual Rev 1.0 August 2020 57 Emerson.
Reference Manual Rev 1.0 August 2020 58 Emerson.
Reference Manual Rev 1.0 August 2020 59 Emerson.
Reference Manual Rev 1.0 August 2020 60 Emerson.
Reference Manual Rev 1.0 August 2020 61 Emerson.
Reference Manual Rev 1.0 August 2020 12.5 Event Configuration 62 Emerson.
Reference Manual Rev 1.0 August 2020 63 Emerson.
Reference Manual Rev 1.0 August 2020 64 Emerson.
Reference Manual Rev 1.0 August 2020 65 Emerson.
Reference Manual Rev 1.0 August 2020 66 Emerson.
Reference Manual Rev 1.0 August 2020 Section 13: Plantweb Insight Location Application Operation and Maintenance 13.1 Tag and Anchor Navigation 67 Emerson.
Reference Manual Rev 1.0 August 2020 68 Emerson.
Reference Manual Rev 1.0 August 2020 69 Emerson.
Reference Manual Rev 1.0 August 2020 13.3 Live Monitoring 70 Emerson.
Reference Manual Rev 1.0 August 2020 71 Emerson.
Reference Manual Rev 1.0 August 2020 72 Emerson.
Reference Manual Rev 1.0 August 2020 73 Emerson.
Reference Manual Rev 1.0 August 2020 74 Emerson.
Reference Manual Rev 1.0 August 2020 75 Emerson.
Reference Manual Rev 1.0 August 2020 76 Emerson.
Reference Manual Rev 1.0 August 2020 13.4 Safety Mustering 77 Emerson.
Reference Manual Rev 1.0 August 2020 78 Emerson.
Reference Manual Rev 1.0 August 2020 79 Emerson.
Reference Manual Rev 1.0 August 2020 80 Emerson.
Reference Manual Rev 1.0 August 2020 13.5 Alert Navigation 81 Emerson.
Reference Manual Rev 1.0 August 2020 82 Emerson.
Reference Manual Rev 1.0 August 2020 83 Emerson.
Reference Manual Rev 1.0 August 2020 13.6 Reports and Charts Navigation 84 Emerson.
Reference Manual Rev 1.0 August 2020 85 Emerson.
Reference Manual Rev 1.0 August 2020 86 Emerson.
Reference Manual Rev 1.0 August 2020 87 Emerson.
Reference Manual Rev 1.0 August 2020 88 Emerson.
Reference Manual Rev 1.0 August 2020 89 Emerson.
Reference Manual Rev 1.0 August 2020 90 Emerson.
Reference Manual Rev 1.0 August 2020 91 Emerson.
Reference Manual Rev 1.0 August 2020 13.7 Anchor Training 92 Emerson.
Reference Manual Rev 1.0 August 2020 93 Emerson.
Reference Manual Rev 1.0 August 2020 94 Emerson.
Appendix Appendix A: Specifications and Reference Data Emerson Location Awareness Reference Manual Rev 1.
Reference Manual Rev 1.0 August 2020 96 Emerson.
May 2020 Location Awareness Within the Plantweb™ digital ecosystem, Emerson's Location Awareness utilizes the WirelessHART protocol to deliver accurate, reliable location information. Location Awareness consists of mobile Personnel Tags, fixed Anchors, and the Plantweb Insight Location application. Safety mustering ■ Create designated areas for safety mustering in the event of a drill or emergency ■ In an emergency, know that your personnel are safe and accounted for at designated muster points.
May 2020 Contents Location Awareness. .......................................................................................................................................................... 2 Component details. ............................................................................................................................................................ 3 Ordering information. ....................................................................................................................
May 2020 Component details Location Personnel Tags Personnel Tags can be worn using a lanyard or belt clip. They have rechargeable, non-replaceable batteries that last up to six weeks on a single charge while operating at 10 hours per day. Personnel Tags are to be charged using a Qi certified charger. Personnel Tags are permanently sealed and should not be opened. Location Anchors Battery powered and easily mounted to infrastructure, Anchors utilize the WirelessHART network to communicate and synchronize.
May 2020 Ordering information Model codes Model codes contain the detail related to each product. Exact model codes will vary, but generally contain one or all of these: 1. Required model components (choices may be available) 2. Additional options (variety of features and functions that may be added to products) The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to additional delivery lead time.
May 2020 Component type Code Description A1 Anchor ★ Regulatory zone Code Description R01 Americas and Europe ★ R02 Asia (China and Japan are not included) ★ R03 Middle East and Africa ★ Accessories type Code Description A01 Pole mount ★ Plantweb Insight 7001X - required model components Note Typical model code for Plantweb Insight 7001X: 7001X V 002 LA L1 L13 Model Code Description 7001X Plantweb Insight ★ Installation type Code Description V Virtual Machine ★ E Existing p
May 2020 Code Description LW Location Awareness Subscription Support addition ★ Location Awareness Tags Code Description L1 Tags 1-250 ★ L2 Tags 251-500 ★ L3 Tags 501-1000 ★ L4 Tags 1001-2500 ★ L5 Tags 2501-5000 ★ Subscription support Code Description L11 1 Year Subscription Support for Location Awareness L1 ★ L13 3 Year Subscription Support for Location Awareness L1 ★ L15 5 Year Subscription Support for Location Awareness L1 ★ L21 1 Year Subscription Support for Location
May 2020 Code Description S31 1 Year Subscription Support Upgrade for Location Awareness Upgrade U15 ★ S33 3 Year Subscription Support Upgrade for Location Awareness Upgrade U15 ★ S35 5 Year Subscription Support Upgrade for Location Awareness Upgrade U15 ★ S41 1 Year Subscription Support Upgrade for Location Awareness Upgrade U23 ★ S43 3 Year Subscription Support Upgrade for Location Awareness Upgrade U23 ★ S45 5 Year Subscription Support Upgrade for Location Awareness Upgrade U23 ★ S51
May 2020 Specifications Communication specifications HART-IP® client Plantweb Insight acts as a HART-IP client for polling information from HART-IP sources such as Emerson 1410/1420 Gateways. WirelessHART Output IEC 62591 (WirelessHART) 2.4 GHz DSSS System requirements Host operating system - Virtualization software VMware® Workstation Pro™ 10 or higher (requirements can be found here). OR VMware vSphere® 5.5 or higher (requirements can be found here).
May 2020 diameter Weight Personnel Tags: 0.11 lbs (49.90 g) 10 Emerson.
May 2020 Anchor: 1.10 lbs (498.95 g) Material Personnel Tags: Engineered polymer Anchor: Engineered polymer Performance specifications Temperature limits Personnel Tags: -4 to 140 °F (-20 to 60 °C) Anchor: -40 to 185 °F (-40 to 85 °C) Battery life Personnel Tags: Six weeks at 10 hours per day operation, on a single charge; rechargeable utilizing a Qi certified charger Anchor: Five years at a 32-second system update rate Tag position accuracy System: +/- 32 ft. (+/- 10 m) Designated areas: +/- 16 ft.
Quick Start Guide May 2020Rev AA 00825-0100-4542, February 2020 Emerson Location Awareness with WirelessHART® Protocol 12 Emerson.
Quick Start Guide February 2020 Emerson Location Awareness safety messages Read this Quick Start Guide before working with the product. For personal and system safety and for optimal product performance, understand the contents completely before installing, using, or maintaining this product. Emerson has two toll-free assistance numbers and one international number. NOTICE Customer Central 1 800 999 9307 (7:00 a.m. to 7:00 p.m.
February 2020 Quick Start Guide NOTICE Installation considerations Only qualified personnel should perform the installation. Verify the operating atmosphere of the transmitter is consistent with applicable hazardous area certifications. Reference the Product Certifications section of this manual for information regarding hazardous certification. This Location Anchor Model GEO20 must be installed to ensure a minimum antenna separation distance of 20 cm (8 in.) from all persons.
Quick Start Guide February 2020 1 Overview 1.1 Location Awareness solution components Location Anchor Location Personnel Tag 4 Emerson.
February 2020 Quick Start Guide Plantweb™ Insight Location application 1.2 Product recycling/disposal Recycling of equipment and packaging should be taken into consideration. The product and packaging should be disposed of in accordance with local and national legislation.
Quick Start Guide 2 2.1 February 2020 Installation Plantweb Insight and Plantweb Insight Location application Install Plantweb Insight and Plantweb Insight Location application Follow instructions in the Plantweb Insight Quick Start Guide. 3 Location Anchor configuration 3.1 Safety messages WARNING Failure to follow these installation guidelines could result in death or serious injury. Ensure only qualified personnel perform the installation. Explosions could result in death or serious injury.
February 2020 3.3 Quick Start Guide Device network configuration To communicate with the Gateway (and ultimately the host system), the Location Anchor must be configured to communicate with the wireless network. Using a Field Communicator or AMS Device Manager, enter the network ID and join key so they match the network ID and join key of the Gateway and other devices in the network. If they do not match, the Location Anchor will not communicate with the network.
Quick Start Guide February 2020 Table 3-1: Device Configuration 3.
February 2020 Quick Start Guide 4 Installation Location Anchor 4.1 Safety messages WARNING Failure to follow these installation guidelines could result in death or serious injury. Ensure only qualified personnel perform the installation. Explosions could result in death or serious injury. Before connecting a handheld communicator in an explosive atmosphere, ensure the instruments are installed in accordance with intrinsically safe or non-incendive field wiring practices.
Quick Start Guide 4.3 February 2020 Wireless considerations Power-up sequence The Wireless Gateway should be installed and functioning properly before any wireless devices are powered. Battery is already installed in the Location Anchor. Move power switch to "ON" position to power up. This results in a simpler and faster network configuration. Enabling Active Advertising on the Gateway ensures new devices are able to join the network faster.
February 2020 Quick Start Guide Figure 4-1: Location Anchor Mounting Quick Start Guide 11
Quick Start Guide February 2020 5 Location Anchor commissioning 5.1 Instructions and procedure safety Instructions and procedures in this section may require special precautions to ensure the safety of the personnel performing the operations. Information that potentially raises safety issues is indicated by a warning symbol ( ). Refer to the following safety messages before performing an operation preceded by this symbol. 5.
February 2020 Quick Start Guide If the Emerson Location Anchor was configured with the network ID and join key, and sufficient time has passed, the Anchor will be connected to the network. If network ID and join key were not configured, reference “Troubleshooting”. Note It may take several minutes for the Location Anchor to join the network. Field Communicator For WirelessHART communication, an Emerson Location Anchor Device Driver (DD) is required.
Quick Start Guide February 2020 Field Communicator Note In order to establish communication with a Field Communicator, power the Location Anchor by switching the power switch to the “ON” position. 14 Function Menu items Guided setup Basic Setup, Join Device to Network, Configure Update Rates Wireless Network ID, Join Device to Network, Broadcast Information Emerson.
February 2020 Quick Start Guide 6 Operation and maintenance 6.1 Overview This section contains information on commissioning and operating Location Anchors. Field Communicator and AMS Device Manager instructions are provided for convenience. 6.2 Instructions and procedure safety Instructions and procedures in this section may require special precautions to ensure the safety of the personnel performing the operations.
Quick Start Guide 6.4 February 2020 7. Remove battery from enclosure. 8. Installation of new battery is the reverse of the removal. Location Anchor status and notifications The flashing LED indicates Location Anchor status using the colors described in Table 6-1. To see the LED, remove the enclosure cover.
February 2020 Quick Start Guide 7 Personnel Tag configuration 7.1 Configuring Personnel Tags Personnel Tag configuration is completed within Plantweb Insight Location application. First, all personnel must be identified as Assets within the Asset page. Once personnel are identified as assets, they can be assigned to a specific tag. Configure Personnel Tags into Plantweb Insight Location application by following the steps below Procedure 1. Add assests. 2. Define assets. 3. Add Tags. 4. NameTag.
Quick Start Guide February 2020 8 Personnel Tag mounting considerations 8.1 Tag mount The Personnel Tag has flexible wearing options to accommodate a variety of PPE. It can be worn with a lanyard or belt clip. Lanyards are shipped with the Personnel Tags. Belt clips can be ordered separately. 9 Personnel Tag operation and maintenance 9.1 Personnel Tag status and notifications The flashing LED indicates Location Tag status using the colors described in Table 9-1.
February 2020 Quick Start Guide the Plantweb Insight Location application to inform that the personnel may need help. 9.3 Personnel Tag charging The Personnel Tag has a rechargeable battery and is charged using a certified Qi charger. Emerson offers both a single charging pad and a bulk charging station (charges 28 tags). See Product Data Sheet for ordering details. WARNING The Personnel Tag should only be charged when the tag is at room temperature.
Quick Start Guide 10 Product certifications 10.1 European Directive information February 2020 A copy of the EU Declaration of Conformity can be found at the end of the Quick Start Guide. The most recent revision of the EU Declaration of Conformity can be found at Emerson.com/Rosemount. 10.2 Telecommunications Compliance All wireless devices require certification to ensure they adhere to regulations regarding the use of the RF spectrum.
February 2020 Quick Start Guide Les changements ou les modifications apportés à l'équipement qui n'est pas expressément approuvé par Rosemount Inc pourraient annuler l'autorité de l'utilisateur à utiliser cet équipement.
Quick Start Guide 10.5 February 2020 Ordinary certification location from CSA The product has been examined and tested to determine that the design meets the basic electrical, mechanical, and fire protection requirements by CSA, a nationally recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and Health Administration (OSHA). 10.
February 2020 3. Quick Start Guide The surface resistivity of the housing is greater than 1GΩ. To avoid electrostatic charge build-up, it must not be rubbed or cleaned with solvents or a dry cloth. Note Conditions 1, 2, 3 do not apply to the GEO10. 4. 10.8 Substitution of components may impair intrinsic safety. Canada I6 Canada Intrinsically Safe (IS) Certificate [CSA] 80004152 Standards CAN/CSA-C22.2 No. 60079-0:19, CAN/CSA-C22.2 No. 60079-11:14, CAN/CSA- C22.2 No. 61010-1-12 (r 2017), CSA C22.
Quick Start Guide 3. February 2020 The surface resistivity of the housing is greater than 1GΩ. To avoid electrostatic charge build-up, it must not be rubbed or cleaned with solvents or a dry cloth. La résistivité de surface du boÎtier est supérieure à un gigaohm. Pour éviter l’accumulation de charge électrostatique, ne pas frotter ou nettoyer avec des produits solvants ou un chiffon sec. Note Conditions 1, 2, 3 do not apply to the GEO10. 4. 10.9 Substitution of components may impair intrinsic safety.
February 2020 Quick Start Guide Special Conditions for Safe Use (X): 1. The plastic enclosure of the GEO20 Anchor may constitute a potential electrostatic ignition risk and must not be rubbed or cleaned with a dry cloth. 2. Do not change the battery when an explosive atmosphere is present. 3. Only replace battery with Rosemount Part No. 00G45-9000-0001. Note Conditions 1, 2, 3 do not apply to the GEO10.
Quick Start Guide February 2020 11 Declaration of Conformity 11.1 Location Awareness Personnel Tag 30 Emerson.
February 2020 Quick Start Guide CE • EMERSON. EU Declaration of Conformity No: RMD 1153 Rev. AB EMC Directive (2014/30/EU) Emerson Location Awareness GEOlO Personnel Tag Han110nized Standards: EN 61000-6-4:2007 +Al:201 l Class A+ EN 61000-6-2:2005/AC:2005 RED Directive 53/EU) Emerson Location Awareness GE010 Personn el Tag Harmoni zed Staooards : !EC 610 I 0-1 :20 lO, AMD I :2016 EN 300 328 V2.1.1:2016 EN 303 417 VI.l.1 :2017 EN 301 489-17 V3.l.1:2017 EN 301 489-3 V2. l.
Quick Start Guide February 2020 CE EMERSON. EU Declaration of Conformity No: RMD 1153 Rev. AB ATEX otified Body SGS FIMKO OY (Notified Body Number: 0598] P.O. Box 30 (Sarkiniementie 3) 00211 HELSINKI Finland ATEX Notified Body for Quality Assurance SGS FIMKO OY (Notified Body Number: 0598) P.0.)3ox 30 (Sarkiniemencie 3) 00211 HELSTNKT Finland l'ageJof J 32 Emerson.
February 2020 Quick Start Guide 11.2 Location Awareness Anchor EMERSON. EU Declaration of Conformity CE No: RMD 1154 Rev. AA We, Rosemount Inc. 8200 Market Boulevard Chanhassen, MN 55317-9685 USA declare under our sole responsibility that the product, Emerson™ Location Awareness GE020 Anchor manufactured by, Rosemount Inc. 8200 Market Boulevard Chanhassen, MN 55317-9685 USA to which this declaration relates, is in conformity with the provisions of the..
Quick Start Guide February 2020 EMERSON. EU Declaration of Conformity CE No: RMD 1154 Rev. AA EMC Directive (2014130/EU) Emerson Location Awareness GE020 Anchor Hannonized Standards: EN 61000-6-4:2007 +A1:201 I Class A+ EN 61000-6-2:2005/AC:2005 RED Directive (2014153/EU Emerson Location Awareness GE020 Anchor !EC 61010-1:2010, AMDl:2016 EN 300 328 V2.l.1:2016 EN 301 489-17 V3.1.
February 2020 Quick Start Guide CE • EMERSON. EU Declaration of Conformity No: RMD 1154 Rev. AA ATEX Notified Body SGS FIMKO OY [Notified Body Number: 0598] P.O. Box 30 (Sarkiniementie 3) 00211 HELSINKI Finland ATEX Notified Body for Quality Assurance SGS FIMKO OY [Notified Body Number: 0598[ P.O.
Quick Start Guide 36 February 2020 Emerson.
February 2020 Quick Start Guide *00825-0100-4542* Quick Start Guide 00825-0100-4542, Rev. AA February 2020 Global Headquarters Emerson Automation Solutions 6021 Innovation Blvd. Shakopee, MN 55379, USA North America Regional Office Emerson Automation Solutions 8200 Market Blvd. Chanhassen, MN 55317, USA +1 800 999 9307 or +1 952 906 8888 +1 800 999 9307 or +1 952 906 8888 +1 952 204 8889 +1 952 204 8889 RFQ.RMD-RCC@Emerson.com RMT-NA.RCCRFQ@Emerson.
Dimensional drawings Dimensions are in inches (mm).
February 2020 Quick Start Guide Quick Start Guide 39
00813-0100-4542 Rev. AA May 2020 Global Headquarters Emerson Automation Solutions 6021 Innovation Blvd. Shakopee, MN 55379, USA North America Regional Office Emerson Automation Solutions 8200 Market Blvd. Chanhassen, MN 55317, USA +1 800 999 9307 or +1 952 906 8888 +1 800 999 9307 or +1 952 906 8888 +1 952 204 8889 +1 952 204 8889 RFQ.RMD-RCC@Emerson.com RMT-NA.RCCRFQ@Emerson.
February 2020 Quick Start Guide A.
Appendix B: Tools B.1 Personnel Tag LED Status LED Color Green Blink rate 1 blink per second Device status Normal operation Green/Red Toggle blink Amber 1 blink per 0.5 seconds User assistance button has been activated Aggressive network search Amber 1 blink per second Moderate network search Amber 1 blink per 2.
February 2020 Quick Start Guide Quick Start Guide 43
