Installation & Assembly

HARDWARE LIST
A (8) 5/16” x 2 1/2” Hex Bolts
B (8) 5/16” Spring Washers
C (8) 5/16” Flat Washers
D (1) Open End Wrench
PARTS LIST
E (1) Table Top
F (4) Legs
QTYPART
8A
8C
HARDWARE QTYPART HARDWARE
8
1
B
D
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
RELOCK
AA
B
B
C
C
FIGURE 1
STEP 2 - Figure 1
Attach each Leg (F) to bottom side of Table Top (E) using
2 Bolts (A), 2 Spring Washers (B) and 2 Flat Washers (C).
Tighten all bolts with Open End Wrench (D) provided.
assembly is now complete.
STEP 1
With the help of a
friend, place Table
Top (E) face
down, on a clean
smooth surface.
For Extension Only - Figures 2 - 4
To extend the table, unlock the two latches.
With the help of a friend, hold both ends of the
table and slide them outward. Then place the
leaf on top. Push both ends of the table
together and lock the latches.
E
E
F
F
F
F
F
FIGURE 2
UNLOCK
FIGURE 3
FIGURE 4
The
EXTENSION DINING TABLE
Dining Table
Page 1 of 1
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.