Specifications
CarePort with iFall
UNCG-31
Revised on 19/02/2019
Manufactured by Rondish Company Limited
Unit G&H, 4/F, Block 1, Kwai Tak Ind. Ctr.,
15-33 Kwai Tak Street, Kwai Chung, N.T.
Hong Kong
Setup
Step 1. Connect the CarePort (tower unit)
• To power ON, connect AC adapter to port (5VDC input) at the back
of the tower unit, and plug-in the AC adapter to an AC Mains power
outlet.
• Use the provided Ethernet cable to connect port (LAN connection)
at the back of tower unit, and plug into your router.
• The green LED will stay ON (wait about 50 seconds with a long
“Beep” is heard) when a network connection has been established
Step 2. Download the app “iFall Rondish” from Google Play or “iFall App”
from App Store
• Launch “iFall” app
- figure 1 for Android
- figure 2 for iPhone (direct access to Current Alarm page with
bottom shown “Event”, “List” and “Register”)
(figure 1) (figure 2)
• Ignore battery optimizations (only for Android) – pressing “YES”
(figure 3) or “ALLOW” (figure 4) – (different type of mobiles may
show different notification)
OR
(figure 3) (figure 4)
• Allow access to the phone’s camera for scanning the QR code on the
devices to be paired with your phone (only for Android)
Step 3. Register Devices (on “Register” tab)
• Enable “Push” to allow the app receive push notifications (iOS)
(figure 5 for Android and figure 6 for iPhone)
• Input a User name
• Click “QR Login”
(figure 5) (figure 6)
• Allow iFall to take pictures by pressing “ALLOW” (for iPhone only)
• Scan the QR code at the back of Unit to pair the unit with your
smartphone (figure 7) – CarePort should be the 1
st
Device to
scan.
• Confirm “Login Success” by pressing “OK”
(figure 7)
• Press “Add Device” button to scan the unique QR code on any
device (e.g. pendant) you want to add into memory
• Confirm “Add Device success” by pressing “Click”