User's Manual

User manual GP2009TR paging transmitter

 Functions.

This device is paging transmitter, it can used transmitter to sending POCSAG signal to

pagers. Or using as repeater to extend paging signal coverage.

 Specification

Frenquency

459.1Mhz

Channel

12.5 / 25Khz

RF power

≤5dbm

Harmonic Radiation:

≤-25DBm

Frequency Stability:

5PPM at -10°C~60°C

Standby current:

30mA

 All Parts include：

Transmitter, ANT, 5VDC adapter, Data line

 Self test：

Assemble ANT, Connected power adapter, the power LED and ready LED should be on.

Press test key, the transmitter should send a message with capcode 1234567. If pager

can got this message, the device test success.

 Working as transmitter.

First connect transmitter with PC serial port by our date line. If PC has no serial port, you

can use a USB-232 convert line instead.

After finished, run our paging software as photo,

PAGE 1
User manual GP2009TR paging transmitter  Functions. This device is paging transmitter, it can used transmitter to sending POCSAG signal to pagers. Or using as repeater to extend paging signal coverage.  Specification Frenquency 459.1Mhz Channel 12.
PAGE 2
Choice right com and fill password to enter as photo: Then you can fill capcode and message, after that ,click sending key, device will send this message to pagers.  Working as repeater Just connected with power adapter and fix in the right place, when it received a paging message, it will repeat the message automatically. So the paging signal coverage be extend.
PAGE 3
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.