Instruction Manual
INSTRUCTION MANUAL for RCEL2A
** GENERAL PRODUCT INFORMATION **
⚫ Materials: Egg Vibrator - fully silicone/ Remote Control - ABS + PU Coating
⚫ 100% safe, phthalate-free and latex-free
⚫ Vibrating Egg can be controlled by the Remote Control or its own button.
⚫ Egg IPX7 Waterproof, remote not waterproof
⚫ Vibrating Egg: Rechargeable, uses USB plug-in (can charge device on computer)
⚫ Remote Control: powered by 1pcs 23A battery
⚫ 10 different patterns (6 speeds and 4 patterns)
** IMPORTANT NOTICE FOR INITIAL USE **
⚫ Make sure the product is 100% dry before charging.
⚫ Before first use, the vibrator needs to be charged between 4-6 hours using the designated DC charging
cable (included).
⚫ Initial Charging Time: between 4-6 hours
⚫ Normal Charging Time after the first use: EGG – 1.5 hours
CHARGING INSTRUCTIONS FOR VIBRATING EGG
⚫ Charging Time: 1.5 hours
⚫ Use only the DC charging cable included
⚫ To charge, insert charging cable pin head into the pin port of the vibrator and the other end to a power
source (USB).
⚫ Indicator light on power button blinks: indicates that egg is charging
⚫ Indicator light steadily on: indicates that device is fully charged
⚫ The Egg will run for 60 minutes at the highest speed
OPERATING INSTRUCTIONS
a. CONTROLLING THE VIBRATING EGG THRU THE REMOTE CONTROL
⚫ To turn on (Standby Mode): Press and hold the power button of the egg for 2 seconds. You are now on
Standby Mode with no vibration. Indicator light is on.
⚫ To switch patterns : Short press the button on the remote control to enter into lowest speed.
Then short press the button to switch between 10 different patterns to cycle.
⚫ Back to Standby Mode: Long press the button on the control to go back to the standby mode with no
vibration. Then short press the button to enter into the lowest speed again.
⚫ To turn off: Press and hold the power button of the egg for 2 seconds, the Egg is off.
b. CONTROLLING THE EGG THRU ITS OWN BUTTON
⚫ To turn on: Press and hold power button on the egg for 2 seconds. Now on standby mode with no
vibration. Light indicator is on. Press the button to enter into the lowest speed and then repeatedly to
switch between 10 different patterns.
⚫ To turn off: Press and hold power button for 2 seconds, the Egg is off.