User's Manual
MM11 Pro
MicMute
Quick Start Guide
MM11
MIC MUTE
PRESS AND HOLD TO MUTE
Thank you for your purchase of the
MM11 Pro MicMute microphone muting
switch. This simple device momentarily
mutes a microphone signal. This
function is very handy in the event of a
sneeze, cough, or other possible
distracting noise.
The MM11 Pro rear panel has two screw
holes for convenient mounting to the
Rolls MSC106 Mic Stand Clamp.
To register the warranty for this product,
visit our website at www.rolls.com and
click on the "Register Your Warranty
Here" text, or ll out the warranty card
and return it to the factory.
DESCRIPTION
The MM11 Pro consists of two balanced
XLR jacks; one female Input, one male
Output, and a momentary touch switch.
OPERATION
To mute a microphone signal, connect the balanced cable to the micro-
phone, and to the female input jack on the MM11 Pro. Connect the male
output jack to another cable, and its end to your next device.
Press and hold the switch for the amount of time you want the signal
muted. To hear the signal again, release the switch. The MM11 Pro can be
congured to “push to talk” or “Push to mute” by selecting the internal
switch. The switch can be accessed from the side of the MM11 Pro.
Rolls Corporation
Salt Lake City, UT
3/13
MM11 Pro MicMute
- Male and Female XLR jacks
- Momentary Mute Switch
- Rear panel screw holes for
convenient mounting
- Can function as push to talk or
Push to mute
This simple device momentarily
mutes (or talks) a microphone signal. This
function is very handy in the event of
a sneeze, cough, or other possible
distracting noise. Or when you need to
control when a mic is active.
INSPECTION
1. Unpack and Inspect the MM11 Pro package.
Your MM11 Pro was carefully packed at the factory in a protective carton.
Nonetheless, be sure to examine the unit and the carton for any signs
of damage that may have occurred during shipping. If obvious physical
damage is noticed, contact the carrier immediately to make a damage
claim. We suggest saving the shipping carton and packing materials for
safely transporting the unit in the future.
2. For warranty registration go to our website: WWW.ROLLS.COM
MM11-PRO
INTERNAL SWITCH
PUSH TO MUTE
PUSH TO TALK
MADE IN USA
www.rolls.com
75889 00111
26
MM11 Pro MicMute