CarDVR-210 WiFi GPS User Manual
Names of Parts GPS Receiver Slot Lens Micro HDMI Port Speaker Tripod Mount Mic Status Indicator LCD Panel Micro USB Port microSD Card Slot Power/Menu Button Record Button Emergency Button English | 1
Getting Started Inserting a microSD Card Before initial use, insert a microSD card. (suggested at least 4GB, up to 64GB) Charging the Unit microSD card Fully charge Rollei Car-DVR for initial use by: • Car charger • PC USB port • USB adapter (not included) During charging, screen shows battery icon or status indicator flashes in orange. When Rollei Car-DVR is fully charged, the indicator turns off. Shooting a Video 1. Power on: Press to turn on Rollei Car-DVR. 2. Record: Press to start recording.
Rollei Car-DVR Operation In preview, press to enter menu settings. Button functions indicated by . Use to navigate menu settings and to back to preview . Menu Settings Rollei Car-DVR has eight menu settings. Advanced settings can be set up via mobile APP.
Record Modes Rollei Car-DVR has two recording modes for different applications: Action Cam: Shoot normal videos. Dash Cam: Shoot loop and emergency videos. Comparison between modes: Mode Record type Record trigger Record duration Display info. Action Cam Dash Cam Normal Press Loop in preview Unlimited 00:06:36 SD card remaining time Emergency • Car impact during • Press loop recording Three min. sections One min.
Wireless & APP Operation Before inital using wirless connections, download and install APP [Rollei Car-DVR] from Google Play Store and Apple Store. [Rollei Car-DVR] has two functions: (1) Local - Direct control (2) Internet - Internet live view Rollei Car-DVR (1) Local 【Local】 Internet Mobile connects to Rollei Car-DVR directly via WiFi for remote control, live view, album management and Rollei Car-DVR setup.
Local 【Local】Function Internet Before using mobile APP's【Local】function, ensure Rollei CarDVR WiFi is on and Rollei Car-DVR Cloud setting is off. Once WiFi is ready, preview shows Rollei Car-DVR name (R2-xxxxxxxx) for few seconds. Mobile Connects to Rollei Car-DVR 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the Rollei Car-DVR name. 2. Run [Rollei Car-DVR]. 3. Tap【Local】and select the Rollei Car-DVR to enter【Local】View Page.
4.【Local】function has three function pages: View, Album and Setup. View Page Items Descriptions Shoot videos and files are saved into Rollei Car-DVR microSD card Shoot videos or Take photos and files are saved into mobile "Album\RolleiCar-DVR\" For multiple Rollei Car-DVRs user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view.
Rollei Car-DVR SD Card Setup When SD card is first-time use or reformatted in Rollei Car-DVR, user should allocate memory for Portable Mode and Car Mode. Go to [Setup] [ Rollei Car-DVR Settings] Adjust slide bar and press [Format] button to complete SD card setup. Rollei Car-DVR Internet Setup Before using internet cloud service, Email and AP must be properly set up. 1. Go to [Setup] [ Internet Settings] Edit Email and AP 2. Tap [Save] to complete Email & AP settings.
Motion Detector Setup When car's engine stops and motion is detected, Rollei Car-DVR will automatically records videos till no motion is detected. [Car DVR Settings] 1. Go to APP [Setup] Turn on [Motion Detector] Tap [Save]. 2. Press [Home] to disconnect from Rollei Car-DVR. 3. Change Rollei Car-DVR to dash cam mode, will show on screen. 4.
Local Internet 【Internet】Function Before using APP's【Internet】function, ensure Rollei Car-DVR internet setup has been completed. Rollei Car-DVR Connects to Cloud Server Enable [Cloud ] in Rollei Car-DVR to upload video streaming to cloud server. Connecting status will be shown on screen. Status Descriptions Connection successful. Preview shows [ Rollei Car-DVR ID.
Troubleshooting Situation Rollei Car-DVR cannot turn on Cause/Solution Power is low.
GPS Receiver 1. Hardware operation Insert GPS receiver into your device. 2. Install Software to Computer 1. Connect camcorder to PC via standard Micro USB cable. Note: The USB cable in accessory kit is only for power supply in car. Please use other Micro USB cable for installation (ex. Android smart phone's usb cable). 2. Find Setup.exe in "My computer\Removable Disk\DCIM". 3. Double click Setup.exe to install/ 3. Software operation 1.
• Press to select your SD card. (Unieye Map only can read the video files in SD card ) • Press to forward/play/stop/backward your video. • Press to adjuest the volumn of your video. 2. Speed Meter • Show the speed inforamtion from the records of the video. • Press to switch the scales of meter in Kilometer per hour. • Press to switch the scales of meter in Mile per hour. 3. Compass • Show the moving direction from the records of the video. 4. Calendar • Press : move to next month.
5. PIP Mode • In Windows mode, press to change view to Full Screen mode. • The defualt view of Full Screen mode : video in parent window, map in child window. • In Full Screen mode, press to switch view back to Windows mode. 6. PIP Switch • Press to switch map in parent window, video in child window. again to switch back.
Conformity The Manufacturer hereby declares that the CE marking was applied to the Rollei CarDVR 210 in accordance with the basic requirements and other relevant provisions of the following CE Directives: 2011/65/EC RoHs Directive 2004/108/EC Low Voltage Directive 1999/5/EG R&TTE Directive 2006/95/EEC LVD Directive 2009/125/EG EuP Directive 2002/96/EG WEEE Directive The EC Declaration of Conformity can be requested from the address specified on the Warranty card.
License Statement The software used in this product is licensed subject to a license pursuant to the GNU – General Public License conditions. We expressly draw attention to the fact that under the GNU – General Public License conditions no liability is accepted. The starting point for the software is the software published online at http://sg-gpl.net/ The software listed there is licensed pursuant to the GNU – General Public License conditions.