Programming Instructions

ManualsBrandsRollease Acmeda ManualsElectronicsLED Decorator Switch

AUTOMATE

™

Paradigm Cut-In Wall Switches

FEATURES:

• Available in single, double & Fifteen Channel.

• LCD display (15 Channel SWITCH).

• Compatible with screwless decorator cover plates.

• Hide unused channel function (15 Channel SWITCH).

• Retrofit Ready.

• Group Control.

AUTOMATE

™

| Paradigm wall switches feature a contemporary design and a wirefree

deployment, making them retrofit ready for any location. Available in single, double or

15 channel configurations, Paradigm switches are perfect for individual room and whole

home shade control.

INSTR-MTRF-SW-1C.2C.15LED V1.1 MAR 2017

433 MHz

Summary of content (12 pages)

PAGE 1
AUTOMATE ™ Paradigm Cut-In Wall Switches 433 MHz AUTOMATE™ | Paradigm wall switches feature a contemporary design and a wirefree deployment, making them retrofit ready for any location. Available in single, double or 15 channel configurations, Paradigm switches are perfect for individual room and whole home shade control. FEATURES: • Available in single, double & Fifteen Channel. • LCD display (15 Channel SWITCH). • Compatible with screwless decorator cover plates. INSTR-MTRF-SW-1C.2C.15LED V1.
PAGE 2
CONTENTS 1 TECHNICAL DATA / PACK CONTENTS 3 2 SAFETY 4 3 INSTALLATION 5 3.1 Install switch batteries 5 3.2 Mount switch 5 4 6 FUNCTIONAL OVERVIEW 4.1 Buttons 6 4.2 Selecting a channel (15 channel switch) 6 4.3 Group control using CH “0” 7 4.4 Hide unused channels (15 channel switch) 7 4.5 Lock Limit Setting (1 & 2 channel switch) 8 4.6 Lock Limit Setting (15 channel switch) 8 5 9 ADDING / REMOVING CONTROLLERS & CREATING GROUP CHANNELS 5.1 Using motor P1 button 9 5.
PAGE 3
1 TECHNICAL DATA / PACK CONTENTS TECHNICAL SPECIFICATIONS Voltage: 3V (2 x AAA) Frequency: 433.92 MHz Transmitting Power: 10 milliwatt Ambient Operating Temperature: -10°C -50°C Transmission Distance: up to 200 meters (open space) PACK CONTENTS 1 x switch (Single, Double or Fifteen Channel) 2 x Wall fixing screws & anchors 1 x Instruction manual 2 x 1.5V - AAA batteries 1 x white single gang decorator style wall plate (incl.
PAGE 4
2 SAFETY WARNING: Important safety instructions to be read before installation and use. Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty. It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference. • Do not expose to water, moisture, humid and damp environments or extreme temperatures.
PAGE 5
3 INSTALLATION 3.1 Install switch batteries Open rear battery cover by pressing gently in, then sliding down. Install 2 x AAA batteries with negative side facing springs. Replace cover by sliding into place. 3.2 Mount switch Use supplied fasteners and anchors as needed to attach base.
PAGE 6
4 FUNCTIONAL OVERVIEW 4.1 Buttons 4.2 Selecting a channel (15 channel switch) Use left and right arrows to change channels. Press right arrow button to increase channel. Response LCD screen will indicate selected channel. IMPORTANT Please refer to the relevant documentation of your motor model for instructions on adjusting motor settings.
PAGE 7
4.3 Group control using CH “0” Channel "0" is pre-set to control ALL shades paired within your multi-channel switch. To create a customized group channel ref to section 5.2 4.4 Hide unused channels (15 channel switch) Your multi channel switch can be configured to have anywhere between 1 to 15 visible channels. Inactive channels will not be visible when scrolling through the < > selections. Press and hold left and right arrow buttons for three seconds. Press right arrow button to decrease channels.
PAGE 8
4.5 Lock Limit Setting (1 & 2 channel switch) The upper and lower limit setting can be locked by holding the STOP button for 15 seconds. Holding the STOP button for a further 15 seconds will unlock these settings. Press STOP and hold for 15 seconds. Press STOP and hold for 15 seconds. Release STOP button. Release STOP button. Locked limit settings. Unlocked limit settings. Remote response Remote response All lights flash x1 All lights flash x2 4.
PAGE 9
5 ADDING / REMOVING CONTROLLERS & CREATING GROUP CHANNELS IMPORTANT Multiple motors can be grouped onto shared channels for co-ordinated control. Limit settings and favorite positions cannot be adjusted when motors are grouped together. * Confirm that motor limits and favorite position are already set for each individual motor. * Ensure that each motor you want to group is also assigned to another channel by itself 5.1 Using motor P1 button Select channel on Switch. Using the side arrow buttons.
PAGE 10
6 TROUBLESHOOTING Problem Motor is not responding Cause Remedy Switch battery is discharged Replace battery Battery is inserted incorrectly Check battery polarity Radio interference / Shielding Ensure switch is positioned away from metal objects and that antenna on motor or reciever is kept straight and away from metal.
PAGE 11
NOTES ROLLEASE ACMEDA Automate™ Programming Instructions | Paradigm Cut-In Wall Switches | 11
PAGE 12
ROLLEASE ACMEDA AUSTRALIA 110 Northcorp Boulevard, Broadmeadows VIC 3047 Queensland Branch Unit 2/62 Borthwick Avenue, Murarrie QLD 4172 T +61 3 9355 0100 | F +61 3 9355 0110 ROLLEASE ACMEDA USA 200 Harvard Avenue Stamford, CT 06902 6320 T +1 203 964 1573 | F +1 203 964 0513 ROLLEASE ACMEDA EUROPE Via Conca Del Naviglio 18, Milan (Lombardia) Italy T +39 02 8982 7317 | F +39 02 8982 7317 info@rolleaseacmeda.com rolleaseacmeda.