Installation Instructions

www.rollashade.com Rev: 02.4.2020 Page 1 of 2© Copyright 2020 Roll-A-Shade Inc., All rights reserved. - Contractor #916075
RAS - Installation Instructions for Sun Sensor Eclipse-S1
Hardware Included Tools
Required
Phillips Head
Drill
12101 Madera Way
Riverside, CA 92503
Phone: [phone]
Fax: [phone]
www.rollashade.com
Sun Sensor
#8-18 x 3/4”
Screws
#8-18 x 1-1/2”
Screws
x2
x2
Sun Sensor Bracket
1. Install Bracket
Install Sun Sensor bracket into mullion vertically or horizontally.
Note: Must be at least two screws in every bracket.
SIDE INSTALLATION
TOP INSTALLATION
BOTTOM INSTALLATION
2. Install Sun Sensor
Install Sun Sensor into bracket.
Note: Must be at least two screws installed into Sun Sensor.
Note2: Make sure screen and buttons are facing you.
Click to Print
Click to Email