Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaflet “USING THE UNIT SAFELY”). After reading, keep the document(s) where it will be available for immediate reference.
Table of Contents Panel Description Front Panel.................................................................................................................................................................4 Rear Panel..................................................................................................................................................................5 Setup Connecting to Power Supply................................................................................................
Panel Description Front Panel 6 1 7 2 3 5 8 9 10 11 12 1. [POWER] Switch Turn the power on or off. 2. [VOLUME] Knob Adjust the master volume. 3. [FUNCTION] Button Press and hold it to access secondary functions of other keys. 4. [METRONOME] Button Press it to turn the metronome on or off. Press [METRONOME] and [TWIN PIANO] at the same time to enter Demo mode. 5. [TWIN PIANO] Button Press it to turn the Twin Piano function on or off.
Panel Description Rear Panel 16 17 18 19 16. DC IN Jack Connect the specified power adaptor. 18. SUSTAIN Jack Connect the included pedal. 17. PHONES/OUTPUT Jack Connect a pair of stereo headphones or external audio equipment. 19. USB Jack Connect to a computer. Setup Connecting to Power Supply You can power the instrument either by using the included power adaptor or by using batteries. Using Power Adaptor: 1. Choose the included adaptor plug that fits the type of AC outlet used in your region.
Connections Connecting a Pair of Headphones Plug a pair of standard stereo headphones in the PHONES/OUTPUT jack. Turn on the Phones Sense. Press and hold [FUNCTION], then press the [F7] key to turn on the Phone Sense function. When headphones are connected, the internal speakers system will be muted. Sound can only be heard from the headphones. Turn off the Phone Sense. Press and hold [FUNCTION], then press the [F#7] key to disable the Phone Sense function.
Turning the Power On or Off 1. Make sure the instrument is properly connected to power supply. 2. Rotate the [VOLUME] knob counter-clockwise to set the master volume level to minimum. 3. Press the [POWER] switch. The button LED will light up, indicating the instrument is powered on. 4. When you are ready to turn the instrument off, press and hold the [POWER] switch for a second. The button LED will turn off.
Tones Selecting a Tone The instrument features 4 tones. Please refer to Tone List for details. Press one of the [TONE] buttons to select a desired tone. The button LED of the selected tone will be lit. Layering Two Tones The Dual mode allows two different tones to be layered together, creating a more full and rich sound. Press two [TONE] buttons to enter Dual mode.
Reverb Press and hold [FUNCTION], then press one of the [Reverb] keys to set the reverb level range from 0 to 10. Press and hold [FUNCTION], then press the black key in the [Reverb] keys to restore the default setting. When the reverb level is set to "0", there will be no reverb effect. Metronome The metronome provides a steady beat to help you practice at a preset tempo. Turn the metronome on or off. Press the [METRONOME] button to turn the function on or off.
Tempo You can set the tempo in the following ways: Press and hold [FUNCTION] or [METRONOME], then press one of the [TEMPO] keys to set the desired tempo. Press and hold [METRONOME], then press the keys marked [1~9~0] to set the tempo value. For example, press [0], [6], [4] in sequence to enter a tempo value of 64. Transpose The transpose function allows the overall pitch of the instrument to be transposed up or down in semitone steps, over a range of -6 ~ +5.
Twin Piano The Twin Piano function splits the keyboard into two areas with the same pitch and tone, for the convenience of playing together with a friend or instructor. 1. Press the [TWIN PIANO] button to turn on the function. The button LED will be lit. The split point is C4. 2. The upper tone selected before entering Twin Piano will become the default tone for both areas. You can press one of the [TONE] buttons to select a desired tone. 3. Press the [TWIN PIANO] button again to turn off the function.
Auto Power Off The instrument will automatically shut down after 30 minutes of inactivity. You can disable this function or change the time setting. 1. To disable this function: press and hold [FUNCTION], then press the key [C8] (the first key to right side of the keyboard). 2. To set the time to 240 minutes: press and hold [FUNCTION], then press the key [B7]. 3. To set the time to 30 minutes: press and hold [FUNCTION], then press the key [A#7]. 4.
Specifications Keyboard Keyboard Touch Response Tones Polyphony (max.) Tones Layer Twin Piano Effects Reverb Song Demo Pitch Adjustment Transpose Tuning Other Functions Metronome Tempo Other control 88 Keys with Touch Response 3 types, Off 128 4 panel Yes Yes 1 type, 0 - 10 levels 10 presets -6 - +5 415.3Hz - 466.
Appendices List of Operations (Button + Key) OFF 10 min. On 240 min. 30 min. (Default) C8 Off 0 (Default) +1 440.0Hz(Default) 442Hz -1 +0.1Hz -0.
Appendices MIDI Implementation Chart Function Basic Channel Mode Note Number Velocity After Touch Pitch Bend Control Change Default Changed Default Messages Altered Note True Voice Note on Note off key's Ch's 0,32 1 5 6,38 7 10 11 64 65 66 67 80 81 91 93 120 121 123 126 127 Program Change True Number System Exclusive System Common Song Position Song Select Tune System Real Time Clock Commands Local On/Off Aux Messages Active sense System Reset Notes: ● Mode 1: OMNI ON, POLY ● Mode 2: OMNI ON, MONO Trans
GO PIANO88_G10