Owner’s Manual Bedienungsanleitung Mode d’emploi Manuale dell'utente Manual del usuario Manual do proprietário Gebruikershandleiding
For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
Owner’s Manual ° Play the Piano ˙ Play various sounds page 8 This unit contains a wide variety of tones (sounds). You can freely select and perform using these tones. ˙ Play two layered tones (Dual Play) page 9 You can layer two tones on a single key. ˙ Play different tones with your left and right hands (Split Play) page 9 You can divide the keyboard into left and right zones, and select a different tone for each zone.
° Easy Quick Guide Selecting a Tone Selecting and Playing Songs This unit lets you enjoy performing with a variety of piano tones and other tones. 1 [Other] button Explanation Grand piano tones Electric piano tones Organ tones The tones of string instruments such as violins, as well as other instruments used in orchestras. Selects a variety of sounds such as bass or accompaniment sounds. 2. Use the [–] [+] buttons to select a tone.
° Contents Easy Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting a Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting and Playing Songs. . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 2 2 Main Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Play . . . . . . . . . .
° Before You Play Closing the Lid 1. When closing the lid, be sure to close the music rest and Opening/Closing the Lid Opening the Lid 1. Grasp and lift the lid with both hands. open the blind. Blind Music rest Arm Arm 2. Grasp and gently lower the lid with both hands. NOTE 55 Always use two hands to open and close the lid. Although the unit’s lid is designed to close slowly and gently when it is released, the lid immediately closes if it has been opened only slightly.
Before You Play Turning the Power On/Off * Once everything is properly connected (p. 7), be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong order, you risk causing malfunction or equipment failure. Turning the power on 1 2 1. Press the [L] button. After a brief interval, you’ll be able to produce sounds by playing the keyboard. 2. Use the [Volume] buttons to adjust the volume. Turning the power off 1. Long-press the [L] button. The power turns off.
° Panel Descriptions [L] Button If you want to turn the power on/off, press the [L] button. To turn the power off, long-press the [L] button. * Never disconnect the power cord while the screen indicates “Don’t disconnect the power.” Bottom Panel Connect headphones and USB flash drive. page 7 Headphone Hook Front Panel Whenever you are not using the headphones, you can hang them on the headphone hook. This is where you operate the unit.
° Connecting Your Equipment Input Jack By connecting an audio player or other audio playback device here, you can play back the sound of the audio playback device via the unit. Use the Input Volume (p. 20) to adjust the volume of the device that’s connected to the Input jack. USB Memory Port You can do the following things using a USB flash drive. 55 WAVE files or MIDI files (SMF) data copied from your computer can be played back by the unit.
° Basic operations Operation Guide Select a setting item Edit a value Restore the default value Use the [K] [J] buttons. Use the [–] [+] buttons. Press the [–] [+] buttons simultaneously. Selecting a Tone In addition to piano sounds, the unit lets you enjoy performing with many other sounds. These sounds are called “Tones.” The Tones are divided into five groups, each of which is assigned to a different Tone button. To select a tone Press a tone button (e.g., [Piano]) and then use the [–] [+] buttons.
Operation Guide Dividing the Keyboard for Two People (Twin Piano) Creating Your Own Piano Tone (Piano Designer) You can divide the keyboard into left and right areas so that two people can play the same range of pitches. Turning Twin Piano on Turn the [Twin Piano] button on. Changing the Twin 1. Press a tone button. Piano tone 2. Use the [–] [+] buttons. Notes played in the right area are louder in the right speaker; notes played in the left area are louder in the left speaker.
Operation Guide Selecting an Item/Editing a Value Display This shows information such as the tone name, song name, tempo, and time signature. Time signature Bluetooth connection Tempo Measure status Select a setting item Use the [K] [J] buttons. Edit a value Use the [–] [+] buttons. Change a value consecutively Hold down the [–] button or [+] button. Return to the default value Hold down the [–] button and [+] button simultaneously.
Operation Guide Selecting a Song Category list You can select songs in the Song screen. 1. Press the [Song] button to access the Song screen. Category USB Memory Internal Memory Listening Category Masterpieces Tempo Time signature Measure Song name Easy Piano 2. Use the [K] [J] buttons to select a category. 3. Use the [–] [+] buttons to select a song. 4. Press the [s] button to play the song. Scales MEMO To select a song from a folder on a USB flash drive, proceed as follows.
° Advanced Operation ˙ Recording Your Performance It’s easy to record your own performances. You can play back a recorded performance to check your playing, or play along with a recorded performance. Starting your recording and saving it Type of recording SMF recording 55 Parts will be separate. 55 You can re-record a specific portion of the song. 55 You can overdub. Audio recording 55 Your performance will be recorded as audio data. 55 The recorded song can be used on your computer.
Advanced Operation Recording Audio Here’s how to record your performance on the unit as audio. The recorded song can be used on your computer. Getting ready to record 3 5 3 4 1. Connect your USB flash drive to the USB Memory port (p. 7). * Audio data can’t be stored in internal memory. 2. Select the tone that you want to play (p. 8). 3.
Advanced Operation Copying a Saved Song (Copy Song) Songs that have been saved in internal memory can be copied to USB flash drive. Alternatively, songs stored on a USB flash drive can be copied to internal memory. * Audio files cannot be copied. * If a USB flash drive is not connected, you won’t be able to perform this operation. 1. Press the [Ambience] button and [Brilliance] button simultaneously. 2. Use the [K] [J] buttons to select “Copy Song,” and then press the [s] (Enter) button.
Advanced Operation ˙ Personalizing Your Piano Sound (Piano Designer) Parameter What is Piano Designer? This unit allows you to personalize your piano sound by adjusting various factors that affect the sound, such as the piano’s strings, the resonance produced using the pedals, and the sound of the hammers striking the strings. This function is called “Piano Designer.
Advanced Operation ˙ Saving Your Performance Settings (Registration) Tone settings and settings such as Dual Play or Split Play can be saved and recalled easily. Such settings are called a “registration.” You can save a total of 25 registrations, five each in buttons [1]–[5]. These 25 registrations are collectively called a “registration set.” Recalling a Registration 1. Press the [Registration] button. 2. Press a number button ([1] to [5]) to choose the location where the desired registration is saved.
Advanced Operation Saving a Registration Set (Registration Export) You can save all registrations held in registration memory into a registration set on a USB flash drive. 1. Connect your USB flash drive to the USB Memory port (p. 7). 2. Press the [Ambience] button and [Brilliance] button simultaneously. 3. Use the [K] [J] buttons to select “Registration Export,” and then press the [s] (Enter) button. The Registration Export screen appears.
Advanced Operation ˙ Loading/Saving Piano Setups This unit lets you load a piano setup that you’ve saved on a USB flash drive, or save your piano setup to a USB flash drive. Loading Piano Settings (Piano Setup Import) 1. Connect your USB flash drive to the USB Memory port MEMO Only piano setups that were created on the unit can be loaded. 2.
Advanced Operation ˙ Convenient Functions Initializing the Memory (Format Media) Here’s how to erase all of the files that you saved in internal memory or on a USB flash drive (sold separately). NOTE 55 When you initialize, all registrations or songs that you saved in internal memory or on a USB flash drive are lost. 55 If you want settings other than the internal memory settings to be returned to their factory-set state, execute a Factory Reset (p. 19). 1.
Advanced Operation ˙ Various Settings (Function Mode) Basic Operations in Function Mode 1. Simultaneously press the [Ambience] button and [Brilliance] button. The unit is in Function mode. 2. Use the [K] [J] buttons to select the item that you want to set. MEMO Depending on the item that you select, another screen may appear, allowing you to select additional items. 3. Use the [–] [+] buttons to edit the value of the setting. 4.
Advanced Operation Indication Value Explanation Specifying the Song (SMF) Playback Mode (SMF Play Mode) When playing back a song (SMF), select the appropriate setting depending on whether you’re playing an internal song or external data. MEMO SMF Play Mode You can also switch the SMF Play Mode by holding down the [s] button and using the [–] [+] button. Auto Select Automatically switches the SMF Play Mode to either “Internal” or “External” depending on the song that is being played.
Advanced Operation Indication Value Explanation Preventing Doubled Notes When Connected to a Sequencer (Local Control) Local Control When you have a MIDI sequencer connected, set this parameter to Local Off. Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or get dropped. To prevent this, you can enable the “Local Off” setting so that the keyboard and internal sound generator will be disconnected. Local Control is off.
Advanced Operation ˙ Using the Bluetooth® Functionality 5. Turn on the Bluetooth function of the mobile device. Provision of Bluetooth functionality Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included. If Bluetooth functionality is included The Bluetooth logo appears when you turn on the power. MEMO The explanation here uses the iPhone as an example. For details, refer to the owner’s manual of your mobile device.
Advanced Operation Using the Pedal to Turn Pages on a Music Score App Here’s how to use this unit’s pedal to operate (turn pages on) a music score app on your mobile device. iOS Note when using an already-paired iOS device The following operation is required after each time that you switch the Bluetooth page-turning/MIDI function or execute a factory reset.
Advanced Operation Transferring MIDI Data Here’s how to make settings for transmitting and receiving MIDI data between this unit and the mobile device. iOS Note when using an already-paired iOS device The following operation is required after each time that you switch the Bluetooth page-turning/MIDI function or execute a factory reset. 1 Disconnect “DP603.
° Troubleshooting Problem Even though you’re using headphones and the sound is muted, a thumping sound is heard when you play the keyboard Power turns off on its own Power does not turn on Can’t perform operations Pedal does not work, or is “stuck” Unable to read from/write to USB flash drive “Buzz” is heard from external devices Items to check Action Could you be hearing the sound of the hammers inside the keyboard, or vibrations in the floor or walls? Playing the keyboard causes internal hammers t
Error Messages Problems with Bluetooth functionality Problem Items to check/Action Could the Bluetooth function be turned “Off”? This unit does not appear in the Bluetooth device list If Bluetooth Audio function is “On” of your mobile device If the Bluetooth Page Turn function is “On” and the Bluetooth Turn/MIDI function is “Page Turn” or “Page Turn&MIDI” If the Bluetooth Page Turn function is “On” and the Bluetooth Turn/MIDI function is set to “MIDI” or “Page Turn&MIDI” If this unit is visible as a devi
° USING THE UNIT SAFELY WARNING Concerning the Auto Off function The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function). If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 22). Use only the supplied AC adaptor and the correct voltage Be sure to use only the AC adaptor supplied with the unit.
° Tone List Piano No. 1 2 3 4 Other Tone Name Concert Piano Ballad Piano Mellow Piano Bright Piano MEMO Piano Designer can be used to customize the sound only for tones of the [Piano] button. E. Piano No. 1 2 3 4 5 6 7 8 9 10 Tone Name Tremolo EP Pop EP Vintage EP FM E.Piano EP Belle ‘60s EP Clav. Stage Phaser ‘70s EP E.Grand Organ No. 1 2 3 4 5 6 7 8 9 10 11 12 Tone Name Pipe Organ Nason flt 8’ Combo Jz.
° Internal Song List No. Song Title Listening Composer Robert Alexander Schumann, Arranged by Franz Liszt Fryderyk Franciszek Chopin Léo Delibes, Arranged by John Maul 1 Widmung S.566 R.253 2 3 Étude, op.10-12 Floral Pursuits * The Nutcracker “Waltz of the Peter Ilyich Tchaikovsky Flowers” (Jazz Arrangement) * The Marriage of Figaro Wolfgang Amadeus Mozart “Overture” (Piano Arrangement) * 4 5 6 Barcarolle 7 Zhavoronok 8 9 10 11 12 13 Sonate für Klavier Nr.23 1 Sonate für Klavier Nr.
For the USA This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. (FCC Part15 Subpart C ¤15.247, 15.253, 15.255) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). (FCC Part15 Subpart C ¤15.247, 15.253, 15.
* 5 1 0 0 0 5 4 0 1 7 - 0 2 *
