Ver 0.3 ZyDAS WLAN Solution ZyDAS WLAN Solution ZDWlan_1211 95.020T00 User Guide Version 0.3 ZyDAS ZyDAS Technology Corporation 1 Doc. No.
Ver 0.3 ZyDAS WLAN Solution ZDWlan_1211 User Guide 95.020T00 1. How to Install ZD1211 driver and ZDWlan Utility: 1.1 Install: Phase 1 1.1.1 Copy the driver package (ex: 1211USB_Install_4214.exe) to any directory of NoteBooK (or PC). The 1211USB_Install_4214.exe can be used at ZD1211 Chip Set Only. It can be run on the Win98, WinME, Win2000 or WinXP OS. Figure 1-1 1.1.2 Click the package “1211USB_Install_4116.exe” then appear the installation page shown as “Figure 1-1”. 2 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 1-2 1.1.3 Press the “next” icon of Figure 1-1, then the page shown as “Figure 1-2”. Select “ZD1211 Config Tool” or “ZD1211 Diver” or all of them to install by checking the items. 3 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 1-3 1.1.4 Press the “next ” icon of Figure 1-2, then the page shown as “Figure 1-3”. Press the “Continue Anyway ” button of Figure 1-3, to finish the first phase installation. 1.1.5 After finishing the phase 1 installation of the driver, the NoteBooK (or PC) with Win98 or WinME OS shall be restarted, but Win2000 or WinXP OS doesn’t need to be restarted. 4 Doc. No.
Ver 0.3 1.2 ZyDAS WLAN Solution Install: Phase 2 Figure 1-4 1.2.1 Insert the Wireless Card to slot of NB, then appear the installation page shown as “Figure 1-4”. For installing the driver automatically, please check the automation item. 5 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 1-5 1.2.2 When the automation item of “Figure 1-4” is selected, press “Next” button of the page, then the “Hardware Installation” page shown as “Figure 1-5”. 6 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 1-6 1.2.3 Press the “Continue Anyway ” button of Figure 1-5, then the page “Found New Hardware Wizard” shown as “Figure 1-6”. - Press the “Finish” button of “Figure 1-6” to finish the package installation. 7 Doc. No.
Ver 0.3 ZyDAS WLAN Solution 2. How to use the ZDWlan Utility: ( Station) 2.1 If you use the WinXP OS , the “Zero Configuration” of WinXP will be disable first , then ZDWlan Utility can be used. Figure 2-1 2.2 Open the ZDWlan Utility from “ Start menu bar \Program List \ ZyDAS 1211 Tool “. The Window is shown as “Figure 2-1”. The adapter can be set at “Station” or “Access Point” Mode from the Mode drop down menu. Station mode is selected for the item.
Ver 0.3 - ZyDAS WLAN Solution Information”. Show the BSSID of connecting AP on the “Link Status” filed. “Signal Strength” and “Link Quality” shown on diagrammatic curve, and described with percentage. Record the number of Tx frames on the filed of “Tx Frame”. Record the number of Rx frames on the filed of “Rx Frame”. 9 Doc. No.
Ver 0.3 ZyDAS WLAN Solution . Figure 2-2 2.3 Click “ More Setting “ icon of Figure 2-1 to enter “More setting “ window. The window is shown as “ Figure 2-2 ”. 2.3.1 “General Connection Setting” group: - Read the current status from the group if the “Change” button is not pressed. - Press “Change” button for modifying the status, when the modification is finished, press “Apply” to save it. The button “Change” and “Apply” is alternately shown on the same position.
Ver 0.3 ZyDAS WLAN Solution - Select the “Ad_Hoc” or “Infrastructure” Mode by the “Network Type” drop down menu. - Select the “Enable WEP” or “Disable WEP” by the “Encryption” drop down menu. - Select the “Open System” , “Shared Key” mode or “Auto” from the “Authentication Mode” drop down menu. Figure 2-3 11 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 2-4 2.3.2 Encryption Setting : 2.3.2.1 Press “WEP Encryption Setting” to enter the “WEP Key Setting” page shown as Figure 2-3. - Select the “Open System” , “Shared Key” mode or “Auto” from the “authentication Mode” drop down menu. - Press the “Change” button to modify the contents of “WEP Key setting”, when it is finished, press “Apply” to save it. The button “Change” and “Apply” is alternately shown on the same position.
Ver 0.3 ZyDAS WLAN Solution - Select which key format “hexadecimal” or the “Key Format” . “ASCII” will be used from 2.3.2.2 Press “WPA Encryption Setting” to enter the “WPA Setting” page shown as Figure 2-4. - You can select the WPA authentication protocol “TLS” , “PEAP” or “TTLS” from “Protocol” filed. - “TLS” Setting: you don’t fill out the User name and Password field, but the Certificate need to be used. When apply the setting, the “WPA Setting page” must be closed.
Ver 0.3 ZyDAS WLAN Solution Figure 2-5 2.2.4 “Other” group: Press the “Advanced Setting” button, then the Advanced Setting page is shown as Figure 2-5. - Select the Window User Interface by the “Language” down drop menu. If the English item is selected, all functions of window are described with English. Select the Traditional Chinese item, and they are described with Traditional Chinese.
Ver 0.3 ZyDAS WLAN Solution EEPROM. Select other region from “User Select” drop down menu, or check “World Mode” item to set it to the word mode. When the word mode is set, it depends on the behavior of AP. If the WLAN card is re-plug , the setting will return to default setting. - At “Fragmentation Threshold” bar, drop and move cursor to set the fragmentation threshold point, the range is from 256 to 2346 bytes.
Ver 0.3 ZyDAS WLAN Solution 3. How to use the ZDWlan Utility: ( Soft Access Point) Figure 3-1 3-1 Open the ZDWlan Utility from “ Start menu bar \Program List \ ZyDAS 1211 Tool “. The Window is shown as “Figure 2-1”. For the soft AP, please option the “ Access Point” from drop down menu Mode filed, and it is shown as Figure 3-1. - - “Network Adapter” shows the available WLAN card for soft AP.
Ver 0.3 ZyDAS WLAN Solution Figure 3-2 Figure 3-3 17 Doc. No.
Ver 0.3 ZyDAS WLAN Solution Figure 3-4 3-2 Click “ More Setting “ icon of Figure 3-1 to enter “More setting “ window. The “Access Point Setting” page is shown as “ Figure 3-2 ”. - Press the “Change” button to modify the “General Connecting Setting” , and press the “Apply” button , when the setting is finished. The button “Change” and “Apply” is alternately shown on the same position. - Select the channel from the drop down menu “ Channel”.
Ver 0.3 - - - ZyDAS WLAN Solution Press the “Setting” button to open the “WEP key setting” shown as Figure 3-3. Press the “Change” button to modify the contents of “WEP Key setting”, when it is finished, press “Apply” to save it. The button “Change” and “Apply” is alternately shown on the same position. Select which key length 64,128 or 256 bits will be modified or used by “Key Length” item. Select which key set will be use by the field of “Default Key ID”.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.