Data Sheet
NT2000
AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855 Fx: +61 2 9648 2455
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: +1 562 364 7400 Fax: +1 888 412 4664
Specifications
Features
Seamlessly Variable Dual 1” Condenser Microphone
Acoustic Principle Pressure, Pressure gradient
Directional Pattern
Continuously variable multi
pattern - Omni, through
Cardioid to Figure 8
Frequency Range 20 Hz-20 kHz
Sensitivity
-36 dB re 1 Volt/Pascal (16 mV
@ 94 dB SPL) +/- 2 dB @ 1kHz
Output Impedence 200Ω
Dimensions
Length - 208mm (8.1889”)
Diameter - 55mm (2.1653”)
Output Connection
3 pin XLR, balanced output
between Pin 2 (+), Pin 3 (-) and
Pin 1 (ground)
Shipping Weight 2.6kg
Net Weight 831g
Polar Pattern
Notes
*Microphone must be registered at www.
rodemic.com to activate extended warranty.
• Large 1” (25mm) HF1 gold sputtered capsule
• Continuously variable polar pattern, from Omni
to Cardioid to Figure 8 controlled on the mic
• Continuously variable PAD and High-Pass Filter
• Ultra low noise, transformerless surface mount
circuitry
• Wide dynamic range
208
55
Accessories
• RC1 case
• SM2 shock mount
• High strength welded and heat treated steel mesh
head
• Internal capsule shock mounting
• Designed and manufactured in Australia
• Full 10 year warranty*
Frequency Response
Cardioid Figure 8 Omni
dB re 1 V/Pa
20
10
0
-10
-20
-30
20Hz 100 1000 10 000 20 000
dB re 1 V/Pa
20
10
0
-10
-20
-30
20Hz 100 1000 10 000 20 000
Cardioid Omni