Data Sheet
i-XY
AUSTRALIA
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855 Fx: +61 2 9648 2455
USA
PO Box 91028, Long Beach CA 90809-1028
Ph: +1 562 364 7400 Fax: +1 888 412 4664
Specifications
Features
Stereo Microphone for iPhone
®
5, 5S and 5C
Frequency ResponsePolar Pattern
50
30 40
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter,
24bit 96kHz A/D conversion
Polar Pattern Cardiod X/Y
Frequency Range 20Hz ~ 20kHz
Signal to noise Ratio 76 dBA SPL (as per IEC651)
Equivalent Noise 17 dBA SPL (as per IEC651)
Maximum SPL 139dB SPL
Sensitivity -34 dB re 1V/Pa (19.7mV @ 94dB
SPL) ± 2dB @ 1kHz
Dynamic Range 122 dB SPL
Power Requirements Powered from device
Output Connection Apple lightning connector
Weight 51g
Dimension (W×L×H) 30mm x 40mm x 50mm
• Record at 24-bit, 96kHz using the RØDE Rec app.
• Inbuilt microphone preamp and analog to digital
conversion for low noise, high quality recording.
• Software-switchable 72Hz high pass lter for reduction of
unwanted low frequency noise.
• Software adjustable internal preamp level control
• Compatible with iPhone 5, iPhone 5s, iPhone 5c.
• Metal casing for enhanced durability and electromagnetic
interference immunity.
• Windshield and zip case included
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
8000 Hz:
14000 Hz: