NT 3 Instruction Guide RØDE STUDIO CONDENSER MICROPHONES
RØDE NT 3 Serial Number: … … … … … … … … Checked by: … … … … … … … … … Date: … … … … … … … … … … … … This condenser microphone has been proudly designed and manufactured by RØDE Microphones in Sydney, Australia. We at RØDE thank you for investing in our product and with the appropriate care, it will serve you well for many years to come. Please take the time to read the following information which will help you to achieve the best possible performance from your NT3.
SPECIFICATIONS: • Capsule: • Active Electronics: • Polar Pattern: • Frequency Response: Externally polarised 19mm (3/4”) condenser J-FET impedance converter with bipolar output buffer Hypercardioid (see graph) 20 Hz –20 kHz (see graph) • Output Impedance: 200 ohm • Sensitivity: -39dB re 1 volt/pascal (12mV @ 94dB SPL) +/- 2dB • Equivalent Noise: <16dB SPL (“A”weighted per IEC268-15) • Maximum Output: +9.
FEATURES: • • • • • • • • • • • Transformerless output Internal capsule shock-mounting Heavy-duty cast metal satin nickel body High immunity to RF interference High-strength welded and heat-treated mesh head Premium quality surface-mount components True condenser (externally biased) Hypercardioid polar response Full frequency response Battery status indicator 12 months parts and labour guarantee Accessories: • ZP1. Zip Pouch • WS3. Wind Shield • RM3.
3. If you choose to use battery power, a 9 Volt (PP3) battery should be fitted into the cavity within the microphone body ensuring correct polarity (+ to + and - to -). We recommend that you use a high quality alkaline battery. To fit the battery, simply unscrew the lower section of the body and insert the battery into the cavity (terminals first). Secure the battery in place with the flexible spring clip and reassemble the body, screwing the sections firmly together. 4.
. A stand mount clip (RM-3) is included with your NT3, and should be used to connect the NT3 firmly and safely to a stable microphone stand. 7. Always use a good quality microphone cable and ensure that it is wired Pin1 Screen, Pin 2+, Pin 3-. You may of course use XLR-XLR, XLR-jack, or XLR-mini jack plugs depending on your relevant input socket. We recommend that all connections made to the mixer or recorder are made with the attenuation (gain) set to OFF. 8.
The best way to assess your recording environment, is to listen to the sound you wish to record acoustically first. Remember that no amount of EQ can correct a ‘bad’ recording environment. Any further desired modification of sound can then be undertaken with the EQ and effects. 11. Live/Stage Use. As a live vocal mic, the NT3 offers studio-quality sound on stage, which is not achievable with a dynamic microphone.
Note: There are no user serviceable parts inside this microphone so there will never be reason for you to dismantle it (except to replace the battery). Any service which may require dismantling must be performed by an authorised RØDE Service Agent. Warranty Service: All RØDE products are warranted for one year from date of purchase and the warranty card should be used to register that purchase. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.