DIGITAL MEDIA RECEIVER PMX2 Design for Shipborne Serial Number: Date of Purchase: Installation & Operation
Introduction PRACTICE SAFE SOUND Dear Customer, Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered auto sound systems may produce sound pressure levels well over 130dB. Use common sense and practice safe sound. Congratulations on your purchase of the world’s finest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product.
Specifications PMX2 Model 12V DC (10.8 to 15.6V ) Operating Voltage 15A Fuse Rating 25 W X 4 @ 4 Ohms RMS 50 W x 4 @ 2 Ohms Peak Power Output Max. RCA Output Voltage 4V Output Impedance 500Ω Frequency Response 20 - 20kHz FM Frequency Range 87.5MHz - 107.9MHz AM Frequency Range 530kHz - 1710kHz 162.40 - 162.55 WB Frequency Range (US & Canada) Tuner Presets 18 FM / 12 AM / 6 WB Clock No Clock Display 2.7” Color TFT Bluetooth 3.0+EDR, A2DP 1.3 USB Compatibility 2.
Design Features Rotary Encoder REV / FWD button This knob is for adjusting main volume, zone volumes, menu navigation and setting adjustments. Use this button to skip back and forward through channels or tracks with a short press. Long pressing will activate manual seek mode. MENU button This button gives you access to the main settings of the unit by long pressing. Short pressing will give you access to the settings for the active source.
Wiring Diagram BLACK USB RADIO ANTENNA BLACK RED (REAR LINE OUT RIGHT OR SUB-W OUT) WHITE (REAR LINE OUT LEFT OR SUB-W OUT) GREY RED (FRONT LINE OUT RIGHT) WHITE (FRONT LINE OUT LEFT) RED RED (AUX IN RIGHT) WHITE (AUX IN LEFT) IN FILTER & FUSE BOX 15 A FUSE BLACK OUT BLACK WIRED REMOTE 13DIN FEMALE ORIENTATION 3 2 1 6 5 4 9 8 7 12 11 10 SECTION A-A B B 1 2 3 4 5 6 7 8 9 10 11 12 PIN NO.
Installation / Mounting Contents • Source Unit Mounting (Using Mounting Plate) • Screws • Trim Bezel • Power / Speaker Harness • Mounting Plate • Installation & Operation Manual • U Bracket To mount the unit, you will need to find a flat surface with adequate clearance behind it that provides enough clearance for the unit and all it’s necessary wiring. 1. Once you have determined a mounting location, you will need to cut a circular hole 3” (77mm) in diameter. 2.
Settings Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12.5kHz AUX INPUT RENAME – To rename AUX, short press the encoder button to set the first letter of the new name. Once active, rotate encoder to adjust letters. Short press the encoder button again to set the next letter. Repeat until AUX has been renamed. Short press MENU to exit and go back up one level. ENABLE - Short press the encoder button to access options.
Settings ADJUSTING THE SUBWOOFER OUTPUT AUTO STORE Press the SUB + or SUB- buttons to adjust the output level (0-20). Short press the encoder button to access the AUTO STORE function. You will need to be under the PRESET group you want to adjust first (FM1>FM2>FM3). This feature automatically stores presets on the unit. It will stop when presets 1-6 are set. Select the next PRESET group and repeat to fill next set.
Operation PRESETS Short press the encoder button to access the PRESETS list. Using this feature allows you to see what PRESETS are saved on the unit. ADD PRESETS Short press the encoder button on the ADD PRESETS option. You will need to be on both the station you want to add first. Using this feature allows you to save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to.
Operation Pandora® This feature allows you to control the Pandora® app from the source unit directly (Android users will have to use Bluetooth only, iOS users can use both USB and Bluetooth). You will need to start the Pandora® app on your device first, then select the Pandora® source option on the source unit. To use the “Thumbs Up” feature, long press the SUB+ button. To use the “Thumbs down” feature, long press the SUB - button. To play or pause a song, short press the PLAY/PAUSE button.
Troubleshooting Symptom Diagnosis Remedy Basic Source unit does not turn on. Blown fuse Check fuse of the unit, replace with correct rating. Vehicle’s ignition is off If connected following the instructions, the unit will not operate with ignition off. Voltage applied to Red wire is not between 10.5 & 16 volts or there is no voltage present Check battery, connections and fuses and repair or replace as necessary.
Warranty Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: Length of Warranty POWER Amplifiers – 2 Years BMW® Direct Fit Speakers – 2 Years Source Units – 1 Year All other products – 1 Year Any Factory Refurbished Product – 90 days (receipt required) What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions.
Installation assistance available at: www.rockfordfosgate.com/rftech Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in or der to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: ETSI EN 301 489-1 V1.9.2: 2011 ETSI EN 301 489-17 V2.2.1: 2012 ETSI EN 300 328 V1.8.
