User's Manual

ManualsBrandsRockford ManualsElectronicsmini touch remote

FS-90

2-Way Touch Screen Remote

Paging Alarm & Engine Starting System

OPERATION INSTRUCTIONS

INTRODUCTION

CONGRATULATIONS on your choice of the 2-Way Touch Screen Remote Paging Alarm &

Remote Engine Starting System by Crimestopper Security Products Inc. The FS-90 operates

at 915MHz and features an animated color LCD Touch Screen remote control. It includes

voice confirmation of all Alarm and Remote Start functions in both English and Spanish. The

remote uses a rechargeable Lithium Ion battery and includes both a car and AC charging

adaptor. The system includes Carjack and Panic protection. You can operate 4 vehicles with

a Pin Code. There are 7 zones of protection with trigger history of date and time of violation.

The remote control includes a Parking Meter, Alarm Clock, and vehicle temperature and

battery voltage checks. Remote Start features include, Daily Starting and built in Turbo Timer.

A special protective cover is included to protect the Touch Screen remote. There is a built in

Photo Cell to sense bright sun light. This changes the icons to black and white for easier

viewing.

CONTACT INFORMATION:

TECHNICAL SUPPORT (800)-998-6880

Monday - Friday 8:00am - 4:30pm Pacific

Website: www.crimestopper.com

CRIMESTOPPER SECURITY PRODUCTS INC.

1770 S. TAPO STREET

SIMI VALLEY, CA. 93063

REV. 04.2010

This device complies with FCC Rules part 15. Operation is

subject to the following two conditions: 1) This device may not

cause interference, and (2) this device must accept any

interference that may be received, including interference that

may cause undesired operation. The manufacturer is not

responsible for any radio or TV interference caused by

unauthorized modification to this equipment. Such modification

could void the user's authority to operate the equipment.

Summary of content (21 pages)

PAGE 1
FS-90 2-Way Touch Screen Remote Paging Alarm & Engine Starting System OPERATION INSTRUCTIONS INTRODUCTION CONGRATULATIONS on your choice of the 2-Way Touch Screen Remote Paging Alarm & Remote Engine Starting System by Crimestopper Security Products Inc. The FS-90 operates at 915MHz and features an animated color LCD Touch Screen remote control. It includes voice confirmation of all Alarm and Remote Start functions in both English and Spanish.
PAGE 2
TABLE OF CONTENTS Operation Cautions & Warnings……………….....…………..…..………………….…………..2 The Remote Controls……………….....…………..……………………………………………..3-4 Menu Flow Chart……………….....…………..……………………………………..………………5 Alternate Sub Menus………………………………………………………………………………. 6 Operating Instructions - Alarm……………….....…………..………………………………..7-11 Car Selection / Car Name / Car Logo……………….....…………..…………………………...11 Auxiliary Channels……………….....…………..…………………………………………………12 Vehicle Status / Voltage / Temperature Check……………….....…………..………......
PAGE 3
THE REMOTE CONTROLS 1-WAY - SIDEKICK REMOTE: The 1-Way sidekick remote adds flexibility to your system. You can have the convenience of operating your system without needing to carry the larger pager remote. The Sidekick remote has less range and offers all of the same operation features except for page-back confirmation. The 1-Way Sidekick Remote uses two CR-2025 Lithium 3 Volt Batteries.
PAGE 4
This screen changes to black and white in bright sun light.
PAGE 5
Menu Flow Chart • • Pressing side button once activates main menu screen. Pressing UP Arrow once goes to CAR selection screen. • • Pressing DN Arrow once goes to SILENT ARM / DISARM screen. Continnue pressing UP or DN Arrow to scroll thru all menus.
PAGE 6
• Alternate Sub Menus Icon turns the Power OFF. All memory functions will be lost. You will have to The reset the Date and Clock after turning remote back on. The Touch Screen Remote will not receive signals from vehicle until the side button is pressed. Battery life will be about 3 months in this mode. The Icon goes to the previous menu. The Icon goes to the next selection menu. The Enter Icon saves the selection.
PAGE 7
or Arming / Locking: Press the Lock Icon on the front screen or the side Lock button on the remote control. The System will arm and confirm with one siren and horn chirp, one park lights flash, and the LED will begin to flash slowly. Power locks will lock (if equipped). The starter disable circuit will turn on. The 2-Way LCD Pager will give voice confirmation “System Armed” while displaying a Lock Icon on front. After a short delay, the system will be completely armed.
PAGE 8
Silent Arming: To Arm without chirps, press the Silent Arm Icon. The 2-Way LCD Pager will confirm with “System Armed”. Silent Disarming: To Disarm without chirps, press the Silent Disarm Icon. The 2-Way LCD Pager will confirm with “System Disarmed”. Silent Mode: To Arm the alarm with silent monitoring of vehicle, press the Silent Mode Icon. When the alarm is triggered, the pager will notify you of an alarm trigger without the siren, horn honk or flashing lights. Only the Starter Kill circuit is active.
PAGE 9
Emergency Override (Disarm without Remote) If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to disarm the system manually. Open the door with the key [alarm will sound], turn the ignition on, and press the Valet / Override button for about 5 seconds. The Alarm will disarm and allow you to use the vehicle until you can repair / replace the remote.
PAGE 10
Pre-Warning Shock Protection: The Pre-Warning (Warn-A-Way) feature will activate when a low-level Light Shock or vibration is detected by the system’s shock sensor. The alarm will chirp the siren 6 times to help deter any further tampering with the vehicle. You will receive a paging signal that will display an icon of a hammer hitting the vehicle. The 2-Way LCD Pager will also vibrate and give voice confirmation of “Sensor Warning” to notify you the vehicle has been tampered with.
PAGE 11
Trunk / Hatch Pop - Remote Channel 1 (Option # 10 and 16) This feature is designed to interface with existing Factory power trunk or power hatch release systems and may require additional parts and/or labor charges. To activate, press and hold the Trunk Icon for 3 seconds. The 2-Way LCD remote will confirm activation with a trunk icon. If the system is armed, it will automatically bypass the trunk and shock sensor trigger zones until 10 seconds after closing.
PAGE 12
Remote Channels 2, 3, 4, 5, and 6 (Optional, Requires special programming) These outputs are programmable for a variety of functions. The default settings are for standard features like dome light, horn honk and remote starting. These outputs are programmable for momentary, latched, or timed. These outputs can only be programmed for 1 function. Consult your installer for available options. The 1-Way Sidekick Remote uses buttons: Channel 2 = then ………….. Option # 11 Channel 3 = then …………..
PAGE 13
Setting the Clock Time and Date: To change the date and time, press the Time Set Icon. The display will show DATE SET screen. Enter the month, day and year and press the Enter Icon to save selection. The TIME SET screen shows next. Enter the correct time and press the Enter Icon to save selection. Set PIN Code: For added security, you can program in a 2 to 6 digit PIN code to Disarm and unlock the doors. To set PIN code: 1. Press PIN SET Icon in Sub Menu.
PAGE 14
Light Delay Time: This adjusts the amount of time the display stays illuminated. You can increase or decrease the time in 1 second increments. The display will show the number of seconds in the top right corner of screen. Press ENTER Key Icon to save selection. Vibration and Melody: To change the sounds, voice, vibration or power off remote, press the MELODY Icon. • Tone ON/OFF - Controls the beeps when a key is pressed on remote control. • Vibration ON/OFF. • Melody - Controls Voice confirmation.
PAGE 15
or Panic Mode: To sound the alarm in an emergency situation or to draw attention to your vehicle, press and hold the Lock Icon until the siren / horn sounds. The alarm will sound for 30 seconds. Press the Lock or Unlock Icon to reset panic mode. Carjack Protection: 2 Modes of Operation (Option #27) Carjack Mode is designed to protect you in a Hold-Up situation. There are 2-ways of activating Carjack, passively thru the doors and actively thru the remote.
PAGE 16
Remote Engine Starting: nd Press and hold the Remote Start Icon until the remote control beeps a 2 time. 1) Parking lights flash twice and the system will chirp 3 times for audible confirmation. The 2-Way LCD Pager will give voice confirmation “Engine ON”. 2) After the Ignition and Accessory circuits turn for a few seconds, the Starter Motor engages. 3) After Engine Starts and Runs, the Parking Lights flash 3 times. The 2-Way LCD Pager will give voice confirmation “Car Started”.
PAGE 17
Remote Start Diagnostics: If the system doesn’t remote start, the Status LED flashes an error code to identify the problem area. • SOLID LED = Valet Service Mode. The system is in Valet Mode. To exit Valet Mode, • • turn the Ignition on, press and hold Valet Button for about 5 seconds until LED goes out. Unit is now out of Valet Mode and should perform a remote start. 2 LED Flashes = Problem with Hood Switch. Make sure hood is closed. 3 LED Flashes = Problem with Brake Switch.
PAGE 18
Turbo Timer: (Option# 23) The optional Turbo Timer mode allows the Remote Starter to keep a Turbo or Turbo Diesel vehicle running for 1 to 6 minutes (selectively) after you remove the key and exit the vehicle. This is handy for turbo cool-down without the need for expensive turbo timers. To activate the Turbo Timer requires pressing remote start button before turning off ignition key. The 2-Way LCD Pager will confirm with TURBO on top of display. The run time options are 1, 3 and 6 minutes.
PAGE 19
Touch-Screen LOCATE/FIND Function description: There is a Locate and Find Function for the 2-Way remote controls. This is used to help find a lost remote control. It will activate a beeping function for 30 seconds to locate the lost remote. You can use the Sidekick 1-Way remote to find a 2-Way remote, or use a 2-Way to find another 2-Way remote. To use this feature, each remote will need to be learned by the other remote. Each remote will need to be named so you find individual remotes.
PAGE 20
SIDEKICK 1-Way Transmitter LOCATE Code-Learning: Press the Touch Screen transmitter Sidekick 1-Way transmitter buttons + code-learning button. Within 30 seconds, press together at the same time. If learning successful, the Touch-Screen Transmitter will display “OK” on the top-right side of the screen along with a confirm melody. LOCATE FUNCTION: Using the 2-Way remote, select the transmitter you want to LOCATE. Then press the button to LOCATE.
PAGE 21
Charging Battery: There is a battery Icon on top of display showing battery condition. To charge battery, plug in USB charger to plug at bottom of remote control. The battery Icon on remote will show battery charging. The USB adaptor has a dual colored LED to show charge. Red LED = Battery charging. Green LED = Battery fully charged. The battery life depends on screen brightness and display time fully charged battery will last about 2 - 3 weeks in normal use. setting.