21119 1230-73022-01-B Printed In China rockfordfosgate.
Introduction Safety Dear Customer, Congratulations on your purchase of the world’s finest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Specifications M2-65 M2-65B M2-8 M2-8B M2-8H M2-8HB M2-TS 6.5” (165mm) 8” (203mm) 8” (203mm) 1” (25.4mm) 2-Way 2-Way 2-Way 1-Way 4Ω 4Ω 4Ω 4Ω Frequency Response (Hz) 40-24kHz 35-24kHz 35-25kHz 1425-25kHz Power Handling - Watts (RMS/Peak) 150/600 250/1000 300/1200 200/800 Sensitivity (2.83V/1M) 91.8dB 93.1dB 94dB 97dB YES YES YES Integrated .25 Amps .25 Amps .
Diagrams B Connector Closeup Front View Bottom View E F C A illus.-1.1 G E D F illus.-2.1 M2-65 M2-65B M2-8 M2-8B M2-8H M2-8HB Overall Diameter (A) 7.05” (179.12mm) 9.07” (230.4mm) 9.07” (230.4mm) Screw Mounting Diameter (B) 6.12” (155.5mm) 7.76” (197mm) 7.76” (197mm) Mounting Screw Angle (C) 6@60° 6@60° 6@60° Overall Height (D) 3.54” (90mm) 4.58” (116.4mm) 4.58” (116.4mm) Mounting Depth (E) 2.49” (63.2mm) 3.35” (85mm) 3.35” (85mm) Cut-out Diameter (F) 5.36” (136.2mm) 7.
Diagrams Sport Grill 6.5” & 8” Stainless Steel Grill 6.
Diagrams Sport Grill 8H Stainless Steel Grill 8H 6
Diagrams Flush Mount 2.1” (54mm) 0.9” (23mm) 0.4” (9mm) 1.8” (44mm) Optional Horn Loading Mounting Flange 4.3” (110mm) 2.4” Dia. (60mm) 3.9” Dia. (100mm) 2.8” (71mm) 2.8” (71mm) 3.6” (91mm) 0.3” (6mm) 1.4” (37mm) Crossover 1.3” (33mm) 3.7” (93mm) 1.5” (39mm) 4.3” (108mm) 1.
Wiring COLOR OPTIX™ Wiring COLOR OPTIX™ Wiring Precautions • Do not connect to 24 Volt electrical systems If not using the PMX-RGB, follow the diagrams below for proper pin out and hardwiring instructions. • We recommend only using the COLOR OPTIX™ wiring chart or connecting to the PMX-RGB. Connecting any other way could cause damage to the speakers or the device you have connected to.
Installation Contents • (1) Pair Marine Grade Speakers • (1) Pair Removable Marine Grade Sport Grills • (1) Pair of Stainless Steel Grill Inserts • (13) Socket head stainless screws • (2) Socket head driver bit • (2) RGB Harness • (1) Pair of M2-TS Tweeters (M2-TS ONLY) • (1) Pair External 18dB/Oct Crossover(M2-TS ONLY) • (1) Pair Flush Mount Clamps(M2-TS ONLY) • (1) Pair Horn Loading Mounting Flange w/ O-rings(M2-TS ONLY) Installation Considerations Before beginning any installation, follow these simple r
Installation Mounting (M2-TS ONLY) Flush Mount Option 1. Determine where the tweeter will be mounted. Ensure an area large enough for the tweeter to mount evenly. Be sure that the mounting location is deep enough for the tweeter to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction. Flush Mount Clamp Use tip of small flat screwdriver to remove tweeter 2. Mark the location for the mounting hole.
Installation Add On M2T-S Tweeter with M2 Speaker Full-Range Speaker (M2) Full Range Amplifier Tweeter Crossover 2Ω - When above 3KHz NOTE: Your amplifier needs to be 2Ω stable per channel when wired in this configuration.
Câblage Câblage COLOR OPTIX™ Câblage COLOR OPTIX™ - Précautions • Ne pas connecter à des systèmes électriques de 24 volts Si on n'utilise pas le PMX-RGB, suivre les diagrammes ci-dessous pour les instructions appropriées de broche de sortie et de raccordement électrique. • Nous recommandons de n'utiliser que le diagramme de câblage COLOR OPTIX™ ou de se connecter au PMX-RGB. Se connecter de toute autre façon pourrait endommager les haut-parleurs ou l'appareil auquel on s'est connecté.
Installation Contenu • (1) Paire de haut-parleurs de qualité marine • (1) Paire de grilles sport de qualité maritime amovibles • (1) Paire d'inserts de grille en acier inoxydable • (13) Vis inoxydable à tête creuse • (2) Mèche à tête creuse • (2) Faisceau RGB • (1) Paire de tweeters M2-TS (M2-TS UNIQUEMENT) • (1) Paire de transitions externes 18 dB/Oct (M2-TS UNIQUEMENT) • (1) Paire de brides de montage encastré (M2-TS UNIQUEMENT) • (1) Paire de brides de montage de chargement d'avertissement avec joints to
Installation Montage (M2-TS UNIQUEMENT) Options de montage encastrable 1. Déterminer où le tweeter sera monté. S'assurer d'avoir une surface suffisamment large pour monter le tweeter uniformément. S'assurer que l'emplacement de montage est suffisamment profond pour que rentre le tweeter ; en cas de montage dans une porte, faire marcher toutes les fonctions (fenêtres, verrous, etc.) dans tout leur champ de fonctionnement pour assurer qu'il n'y a pas d'obstruction.
Cableado Cableado del COLOR OPTIX™ Precauciones para el cableado del COLOR OPTIX™ • No lo conecte a sistemas eléctricos de 24 voltios Si no usa el PMX-RGB, siga los diagramas a continuación para obtener las instrucciones de disposición de contactos y cableado correctas. • Recomendamos usar solamente la tabla de cableado del COLOR OPTIX™ o conectarse a PMX-RGB. Conectarse de cualquier otra manera podría dañar los altavoces o el dispositivo al que se ha conectado.
Instalación Índice • (1) Par de altavoces de grado marino • (1) Par de rejillas deportivas extraíbles de grado marino • (1) Par de insertos de rejilla de acero inoxidable • (13) Tornillos de acero inoxidable de cabeza hueca • (2) Broca para atornillar tornillos de cabeza hueca • (2) Arnés RGB • (1) Par de tweeters M2-TS (SOLAMENTE M2-TS) • (1) Par externo cruce de 18dB/oct.
Instalación Montaje (SOLAMENTE M2-TS) Opción con montaje al ras 1. Determine adónde se montará el tweeter. Asegúrese de que haya un área suficientemente grande para montar de manera plana el tweeter. Asegúrese de que el lugar de montaje sea suficientemente profundo para que quepa el tweeter; si se monta en una puerta, accione todas las funciones (ventanas, cerradura, etc.) en toda su gama de funcionamiento para asegurarse de que no haya obstrucciones.
Verkabelung COLOR OPTIX™ Verkabelung Vorsichtsmaßnahmen für die COLOR OPTIX™ Verkabelung • Nicht an 24-Volt-Spannung anschließen Wenn Sie PMX-RGB nicht verwenden, folgen Sie den Diagrammen unten für die Anleitungen für die korrekten Stiftkontakte und Festverdrahtung. VERKABELUNGSOPTIONEN FÜR COLOR OPTIX™ • Wir empfehlen, nur die COLOR OPTIX™ Verkabelungstabelle zu verwenden oder an PMX-RGB anzuschließen. Andere Arten von Anschlüssen können die Lautsprecher oder das angeschlossene Gerät beschädigen.
Einbau Inhalt • (1) Paar wasserbeständige Lautsprecher • (1) Paar abnehmbare wasserbeständige Sportgitter • (1) Paar Edelstahl-Gittereinsätze • (13) Edelstahl-Sechskantschrauben • (2) Sechskant-Schraubendreher • (2) RGB-Kabelbaum • (1) Paar M2-TS Hochtöner (NUR M2-TS) • (1) Paar Außen-Crossover 18 dB/Okt (NUR M2-TS) • (1) Paar mündige Einbauklemmen (NUR M2-TS) • (1) Paar Einbauflansch für Hornladung mit O-Ringen (NUR M2-TS) Informationen zum Einbau Vor dem Einbau diese einfachen Regeln befolgen: 1.
Einbau Einbau (NUR M2-TS) Mündige Einbauoption 1. Legen Sie fest, wo der Hochtöner eingebaut werden soll. Stellen Sie sicher, dass genügend Platz vorhanden ist, um den Hochtöner gleichmäßig einzubauen. Stellen Sie sicher, dass die Befestigungsstelle für den Hochtöner tief genug ist; bei Befestigung an einer Tür alle Funktionen (Fenster, Schlösser, usw.) über den gesamten Bewegungsablauf prüfen und sicherstellen, dass es keine Behinderung gibt.
Cablaggio Cablaggio COLOR OPTIX™ Precauzioni Cablaggio COLOR OPTIX™ • Non collegare a sistemi elettrici a 24 Volt Se non si usa PMX-RGB, seguire i diagrammi sotto per i giusti pinout e le istruzioni di cablaggio. • Consigliamo di usare solo la tabella di cablaggio COLOR OPTIX™ o di collegare PMX-RGB. Qualsiasi altro tipo di collegamento potrà danneggiare gli altoparlanti o il dispositivo che avete collegato.
Installazione Contenuto • (1) paio di altoparlanti marini • (1) paio di griglie sport marine rimovibili • (1) paio di inserti griglia in acciaio inox • (13) viti a testa esagonale inox • (2) punte esagonali • (2) cablaggio RGB (rosso-verde-blu) • (1) paio di tweeter M2-TS (SOLO M2-TS) • (1) paio di crossover esterno da 18 dB/Ott (SOLO M2-TS) • (1) paio di morsetti per montaggio a incasso (SOLO M2-TS) • (1) paio di flange di montaggio per carico della tromba con guarnizione circolare (SOLO M2-TS) Consideraz
Installazione Montaggio (SOLO M2-TS) Opzione montaggio a incasso 1. Determinare la posizione di montaggio del tweeter. Assicurarsi che l’area sia grande abbastanza per potere montare il tweeter in modo uniforme. Assicurarsi che la posizione di montaggio sia sufficientemente profonda per il tweeter; per il montaggio su porta provare l’intero movimento di tutte le funzioni (finestre, serrature, ecc.) per garantire che non vi sia nessuna ostruzione.
Warranty Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: Length of Warranty POWER Amplifiers – 2 Years BMW® Direct Fit Speakers – 2 Years PUNCH® & PRIME® Amplifiers – 1 Year Speakers, Signal Processors, Accessories and Capacitors – 1 Year All marine, motorcycle, motorsport products - 2 Years Any Factory Refurbished Product – 90 Days (receipt required) What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by authorized