The Ac cu-Chek Inform | system includes the following components and accessories: A Meter B Code key reader € Base unit with power supply bo Accessory box {shown with consumables not included in scope of delivery) The system can be configured by two different methods: 1: Configuration via the: Setup function on the meter {see Chapter 8) 2 Can figuration via data management system Note: Not all options can be configured using the Setup function. vin The meter.
Overview of the meter ‘The meter has hie following elements: Test strip port Insert the test strip here. Touch screen (touch-sensitive display) This screen allows you to perform patient tests, perform controls tests, and review results. To view any of them, simply touch the button on the screen. On/Gff button Press this bunion lo urn the:meter on or oft. In addition, you can activate or deactivate the fightback with this button. RE Bar code scanner.
Wireless network connection (RF card} vos introduction's The optional RF card for a wireless network connection allows the meter to send data (test results, patient 10s, operator IDs, etc.) to te data management system without the need to return the meter to the base unit or connect the meter by cable. The device conforms with the ELAN standard IEEE 802.115. This feature must be configured by the system administrator. Observe the guidelines of your facility for using wireless network connections.
Ee 20 This equipment has been tested and found to comply. with the fruits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment ‘generates, uses and can radiate radio frequency. energy-and, if not installed and used in ‘accordance with the instructions, may cause harmful interference.
12 General product information Technical data RG Er Ta fit Height Ammo/ 188 in 34 mim / 13400 + AC plug (28-40 mm / LE i) Width 92mm /362 in 150 mm / 5.01 in 52.mm / 2.
eae pee Input voltage +75 VDC +765 VDC 80 10 284 V AC Input frequency Input current max) 400 MA (max) at 100-240 VAC 50 Hz Lithium ION battery 18 measurements NA N/A Code 93, EAN 13, Interleaved 2 of 5, Coda bar. charge rate possible after 80 min of charging Interfaces Charge contacts Charge contacts DC connector IR port IR port Replaceable Bar code scanner R45 Ethernet AC input contacts RF card Usability B Data transfer rate RF card: 11Mbps. IR: 9.6K 115K bps NA Theme: 10 Bps ISB: 12 Bps Min.
B Appendix La Option: Wireless network (ELAN) Application area Benefits of wireless connectivity Thi optionally available module for wireless network connectivity (RF card) allows facilities to connect to their data management system on & continuous basis. Wireless connectivity can help to ensure that changes to information in the data management system are lens immediately to ali networked meters.