User Manual

- 02 -- 01 -
Chapter 1 LOCATION OF CONTROLS
20
17
19
18
21
9
1
2
3
4
5
6
7
8
13
14
10
11
12
15
16
1.Set Time Button 2.Hour Button 3.Minute Button
4.Dimmer Button 5.SNOOZE Button 6.Alarm Pause Button
7.Alarm OFF Button 8.Alarm 1 Button 9. Alarm 2 Button
10. PM Indicator 11.Alarm 1 Indicator
12.Alarm 2 Indicator 13.DST Indicator
14.12/24H & DST Button 15.Volume + Button
16.Volume - Button 17.Battery Door
18.USB Port 19.DC Jack
20.Speaker 21.Holder ( x 2pcs)
Note: Battery is not included
Chapter 2 POWER RESOURCES
1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in
the battery compartment to memorize the time setting in case
of power outage.
NOTE: Batteries(not included) don't support time display but can back up
time & alarm setting and trigger an alarm in case of AC power failure.
2. Connect the adapter line to DC jack , then plug into a 100~240V
AC wall power outlet.
Chapter 3 TIME SETTING
SET
TIME
HOUR MIN
SET
TIME
12/24H &DST
1. Press button once, display starts flashing.
2. Press button to set the hour. press button to set
the minute.
3. Press button or button to save time or wait
for another 5 seconds to confirm automatically.
To change 12H/24H time format
Press button to change 12H/24H time format.
ROCAM
R
CR1001E
Alarm Clock with USB Charger
CREATE YOUR PERFECT SLEEP ENVIRONMENT
Version 1.0
Mad e in China
Http://www.yelaw.net
[e-mail]
Speak with our Experts
[phone]
Mon-Fri: 9:00am ~01:00pm PST
8:00am ~12:00pm PST
SNOOZE