n o i rs e V ” D ” R 301 • R 301 Ultra
SUMMARY WARRANTY IMPORTANT WARNING INTRODUCTION TO YOUR NEW R 301 • R 301 Ultra BOWL CUTTER / VEGETABLE PREPARATION “D” VERSION SWITCHING ON THE MACHINE • Advice on electrical connections • Control panel ASSEMBLY • Bowl cutter attachment • Citrus-press attachment • Vegetable preparation attachment USE AND EXAMPLES • Bowl cutter attachment • Vegetable preparation attachment OPTIONS • Serrated blade CLEANING • Motor base • Bowl cutter attachment • Citrus-press attachment • Vegetable preparation attachment
ROBOT-COUPE S.N.C., LIMITED WARRANTY 2 - Labour to sharpen and/ or replacements for Your new ROBOT-COUPE appliance is warranted to the original buyer for a period of one year from the date of sale if you bought it from ROBOT-COUPE S.N.C. If you bought your ROBOT-COUPE product from a distributor your product is covered by your distributor’s warranty (Please check with your distributor terms and conditions of the warranty). The ROBOT-COUPE S.N.C.
IMPORTANT WARNING W A R N I N G KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly.
INTRODUCTION TO YOUR NEW R 301 • R 301 Ultra BOWL CUTTER/VEGETABLE PREPARATION ATTACHMENT “D” Version 14 The R 301/R 301 Ultra is perfectly geared to professional needs. It can perform any number of tasks, which you will gradually discover as you use it. This food processor consists of a bowl cutter and vegetable preparation attachment.
• CITRUS-PRESS ATTACHMENT 1) and 2) Operate the same way for the cutter attachment. 3) Fit the basket on the enclosed bowl and rotate it clockwise. You will notice that the magnet of the basket is directly above the magnetic bar. 4) Engage the cone on the motor shaft and lower it right to the bottom of the bowl. 5) Switch on the machine, then keep the fruit on the cone until the juice is completely extracted from the fruit. Stop the machine when finished.
EMULSIFY Mayonnaise / ailloli / remoulade sauce 1 3 Hollandaise/béarnaise 1 5 Snail or salmon butter 1 4 HOW TO USE THE CYLINDRICAL HOPPER - Fill hopper with vegetables. - Start to press the button and switch on the machine. - Maintain pressure until all the vegetables have been processed.
MAINTENANCE If the food has a solid consistency, remove the blade and empty the bowl. Replace the bowl, place the blade back on the shaft and switch on the machine in order to remove any mixture which may have stuck to the blade. If you wish, you can rinse the bowl by filling it with hot water and switching on for a few minutes. • CITRUS-PRESS ATTACHMENT Disengage the basket with the cone by rotating it clockwise. Then raise them all together. Disengage the bowl as usual. After that, clean each part.
STANDARDS SAFETY The R 301/R 301 Ultra are fitted with a magnetic safety device and motor braking system. As soon as you open the cutter lid, the motor stops. To restart the machine, simply close the lid and press the green switch. As soon as you open the lever of the vegetable preparation attachment, the motor stops. As soon as you close the lever, the machine restarts. Beyond 4 or 5 seconds opening time, simply close the lever and press the green switch.
92
93
95
96
97
99
101
Tél. : 03 85 69 50 00 - Fax : 03 85 69 50 07 Tél. : 01 43 98 88 15 - Fax : 01 43 74 36 26 12, avenue du Maréchal Leclerc - BP 134 13, rue Clément Viénot 71305 Montceau-en-Bourgogne Cedex 94305 Vincennes Cedex email : france@robot-coupe.fr Export Department Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26 18, rue Clément Viénot - BP 157 94305 Vincennes Cedex - France http://www.robot-coupe.com - email : international@robot-coupe.
