Installation Guide

5505
Urethane Adhesive Remover
1. PRODUCT NAME
ROBERTS
®
5055 Urethane Adhesive Remover
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS 5505 Urethane Adhesive Remover is a superior cleaner to aid in the
removal of fresh and dried adhesive from flooring surfaces and tools.
Also available as wipes.
Features and Benefits
• Quick and easy adhesive spot removal
• Extremely low odor
• Wipes are biodegradable
• Advanced technology formula
Uses
For the removal of fresh and recently cured urethane from pre-finished (non-
wax) wood flooring, and the removal of fresh and recently cured 2-part epoxy,
PVA (carpet seam sealers, carpet and wood) and SBR (multipurpose, carpet
and VCT) adhesives.
Limitations
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards and manufacturer’s guidelines and specific recommendations
prior to use for additional information.
4. TECHNICAL DATA
Product Type:
Liquid/Wipe
Color:
Clear
Odor:
Sharp
VOC:
< 500 g/L
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
SUPERIOR
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com
5. INSTRUCTIONS
Installation
Test 5505 in an inconspicuous area prior to use. Remove adhesive while it is
fresh for best results. The chemical composition of adhesives can vary greatly.
Some reactive adhesives are difficult to remove once fully cured.
Wet Spot Removal – Apply 5505 to a clean, white cloth and rub adhesive lightly
to remove. Clean surface with a suitable floor cleaner and wipe dry.
Dry Spot Removal – Allow 5505 to saturate adhesive (approx. 1 hr.) to soften.
Light spots and fingerprints: Use 5505 and remove spot using a Magic Eraser
®
.
Clean surface with a suitable floor cleaner and wipe dry. Heavy spots: First
remove softened adhesive with plastic putty knife, then use melamine pad
(cleaning eraser) to remove any remaining residue. Clean surface with a
suitable floor cleaner and wipe dry.
NOTE – The chemical composition of adhesives can vary greatly. Some
reactive adhesives are difficult to remove once fully cured. It is always best to
remove adhesives immediately while they are fresh. Do not scrub surface of
wood aggressively as this may damage the surface.
6. AVAILABILITY
Packaging
24 ounce Plastic Bottle (710 mL) R5505 075378550525
60 Towelettes R5505-W 075378550563
7. WARRANTY
ROBERTS warrants that this product will be free from manufacturing defects
for 12 months from the date of manufacture, when applied in accordance with
ROBERTS’ instructions and industry standards. ROBERTS’ sole liability is to
either supply new product or refund the original purchase price. This limited
warranty excludes all other express warranties including the warranties
of merchantability for a particular use or purpose. Any implied warranties
arising by operation of law are limited to one year. ROBERTS will not be liable
for any incidental or consequential damages.
Visit www.robertsconsolidated.com for full warranty details.
8. MAINTENANCE
Not applicable.
9. TECHNICAL SERVICES
For technical assistance or installation
questions not covered in this document,
please contact our Technical Services
Department at [phone] or visit
robertsconsolidated.com.
10. FILING SYSTEM
Division 9