Integration Manual

Integration Manual

MCSS RF Module

Date

Signature

Drawn

AE-BE/EHW4-AU KU

24/01/2019

Checked

AE/EBA1-AU BW

06/02/2019

Approved

Contents

Operation and integration instructions ................................................................................... 1

General Description ............................................................................................................. 1

Parts Affected ...................................................................................................................... 1

Features ............................................................................................................................... 1

Regulatory Information ........................................................................................................ 2

Labelling and user information requirements ................................................................. 2

RF Antennas ..................................................................................................................... 2

RF Exposure ...................................................................................................................... 3

Helpful Websites .................................................................................................................. 3

Operation and integration instructions

General Description

Radio frequency module encompassing two variants. This module operates as a frequency

hopping system in the 915MHz band. The variants have identical RF sections and only

differ in non-radio frequency parts loading with connectors and a USB to UART section.

Parts Affected

Model Number

Part Number

Interface

6LP SN

F005V19473

Serial

6LP GW

F005V19474

Mini PCI-E USB

Features

 Operating band: 902 to 928MHz

 Channels used: 917 to 927.6MHz

 Number of channels: 50

PAGE 1
Integration Manual MCSS RF Module By Date Signature Drawn AE-BE/EHW4-AU KU 24/01/2019 Checked AE/EBA1-AU BW 06/02/2019 Approved Contents Operation and integration instructions ................................................................................... 1 General Description ............................................................................................................. 1 Parts Affected .............................................................................................
PAGE 2
Integration Manual MCSS RF Module      Nominal power (radiated or conducted): 24.5dBm conducted Modulation(s): 2GFSK 50KHz deviation Nominal bandwidth: 100KHz Frequency hopping transmitter OEM installation only Regulatory Information The finished product is required to comply with all applicable FCC equipment authorisations, regulations, requirements and equipment. We will provide guidance to the host manufacturer for compliance with the FCC part 15B requirements.
PAGE 3
Integration Manual MCSS RF Module Any connection used in the host system must use a unique antenna connection on the outside of the device. Recommended connection is an RP-SMA type and that is included in the module kit. Antenna location must be selected to provide at least 20 cm between itself and nearby persons. RF Exposure Calculated using MPE as the unit is designed for mobile or fixed location transmitters no SAR has been calculated/measured.