MI2C001-001-US Operating Instructions Please Keep Safe for Future Reference Document Version / Status: V2.
MI2C001-001-US Operating Instructions Contents 1 Revision History .................................................................................................................................... 2 2 Symbols and What They Mean ............................................................................................................. 3 3 Warnings ...............................................................................................................................................
MI2C001-001-US Operating Instructions 1 Revision History Date of this revision: 01.02.2019 Revision Number / Date V2.0 / 01/10/2019 V2.1 / 02/01/2019 Date of next revision Author Summary of Changes Herbert Kozel S. Lachenwitzer First draft Added warnings at chapter 3 Changed product declarations from EU to US © Rosenberger 2019 – www.rosenberger.
MI2C001-001-US Operating Instructions 2 Symbols and What They Mean You may encounter the following symbols on the device and in these operating instructions. The meanings of these are provided below. These operating instructions contain important information and so must be read with care. Important warning.
MI2C001-001-US Operating Instructions 3 Warnings This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
MI2C001-001-US Operating Instructions 4 Safety Information In principle, the device is safe to operate provided that you observe the information in these operating instructions and on the device itself. • The inside of the device contains hazardous electrical circuits that can be lethal if touched. The device is only to be opened and/or repaired by authorized personnel. Never open the device and never attempt to carry out any repairs yourself. Instead, please contact your Customer Service team.
MI2C001-001-US Operating Instructions • Only use the spare parts and accessories included with delivery or spare parts and accessories that have been officially approved by us. Using non-approved spare parts and accessories can significantly impair the function of the device and compromise your safety. For details of which parts have been included with delivery, please see the "Scope of Delivery" section; for details of original accessories, please see "Spare Parts and Accessories".
MI2C001-001-US Operating Instructions 5 Device Description and Usage / Installation Instructions • The MI2C001-001-US is a telematics unit that is solely intended for installation in a GSH27 jackhammer. Therefore, please also observe the information in the "Safety Information" section.
MI2C001-001-US Operating Instructions 2. Remove the cover of the jackhammer grip. Get the MI2C001-001-US telematics unit ready for installation with the battery installed and connected (see Figure 2). Figure 2: Unit prepared for installation 3. Connect the line voltage supply leads of the telematics unit to the flat-contact connectors below the power supply connection for the jackhammer (Figure 3).
MI2C001-001-US Operating Instructions 4. Place the unit in the shell of the jackhammer grip exactly as shown in Figure 4 so that the unit housing rests on two foam cushions. Gently press the unit against the foam cushions until the tab (identified by an arrow in the image) clicks into place, thereby securing the unit. Figure 4: Mounting the telematics unit 5.
MI2C001-001-US Operating Instructions To verify that the device is functioning correctly, you have the option of carrying out a visual check. For further details, see "Commissioning". 6 Scope of Delivery After unpacking the device, immediately check that everything is present and in good condition. If an item is missing or damaged, please let us know right away. For details of your Customer Service team, please see the "Service and Maintenance" section.
MI2C001-001-US Operating Instructions 8 Commissioning The device must NEVER be commissioned by the operator (end customer/nonspecialist) of the GSH27 jackhammer. There is no way that the jackhammer operator can inadvertently come into contact with the device, which can only be accessed with a tool. The telematics unit functions independently without the need for a specific commissioning process. 8.1 Functional Check A functional check can be carried out when installing or servicing the device.
MI2C001-001-US Operating Instructions LED no. 1 LED no. 2 Figure 7: Identification of LEDs 9 Function of the Device The MI2C001-001-US device is a telematics unit that is intended for installation in a type GSH27 jackhammer. The unit functions independently without the need for a specific commissioning process. Whenever the jackhammer is connected to the line voltage, the Li-ion battery starts recharging regardless of its current state of charge.
MI2C001-001-US Operating Instructions 10 Replacing the Battery • Please familiarize yourself thoroughly with the "Safety Information" section before replacing the battery. • Only authorized specialist personnel are permitted to replace the battery. Batteries are classed as hazardous • waste. They must not be disposed of together with your general/household garbage. Dispose of batteries in accordance with the applicable state and local guidelines.
MI2C001-001-US Operating Instructions Next, insert the new battery into the holder shaft and carefully connect the battery cable to the connector. The mechanically coded connector prevents the battery from being connected with reverse polarity. Figure 11: Inserting the new battery Figure 12: Connecting the battery connector Attention: Intentionally installing a battery with reverse polarity can damage the device beyond repair and compromise the safety of the operator. © Rosenberger 2019 – www.
MI2C001-001-US Operating Instructions 11 Cleaning the Device • • • It is essential to disconnect the device from the line supply before cleaning it. To do this, unplug the supply cable from the power receptacle. Do not immerse the device in water under any circumstances. Only use the cleaning agents approved by the manufacturer. For further details, see the information below. The device does not require cleaning to function correctly. Periodic cleaning at regular intervals is not necessary.
MI2C001-001-US Operating Instructions 13 Troubleshooting • Only authorized specialists are permitted to carry out troubleshooting by identifying and remedying faults.
MI2C001-001-US Operating Instructions 15 Technical Data Model: MI2C001-001-US Line voltage connection: Rated frequency: Rated power: Protection class: 100–240 V AC 50/60 Hz 6W Must be installed double-insulated Battery connector: 3.0–4.2 V DC Charging current at battery connector: Max. 500 mA Ambient conditions: Dimensions: Ambient temperature Humidity Altitude 3,000 m Overvoltage category -20–60°C Max. 93±3% Max. II Weight: Length x width x height = (91.5 x 46.2 x 46.
MI2C001-001-US Operating Instructions 16 Disposing of the Device The device has been developed and manufactured using high-quality materials and components that can be recycled and reused. As stipulated by Directive WEEE2 2012/19/EU and the German Electrical and Electronic Equipment Act (ElektroG), the device must not be disposed of together with general/household garbage *. Do not dispose of Li-ion batteries via the municipal waste disposal facilities.