User's Manual Part 7

en | 65
12.2 How voice control works
12.2.1 The main menu
As soon as you start voice control, the main
menu appears:
In the main menu you will find a selection of
voice commands that you can use directly for
the most important functions:
f Telephone
– Call a contact
– Dial a number
f Navigation
– Enter an address for route guidance
– Select a point of interest for route gui-
dance
– Start route guidance to the home address
– Select one of the previous destinations for
route guidance
– Cancel the current route guidance session
f Playing media (audio)
– Start playback of a song, audiobook or
podcast
Notes:
f For each operating mode there is a
separate menu containing further
commands (see the section entitled
“Opening the menu for an operating
mode” (page 65)).
f If a voice command opens a sub-
menu, you can return to the previ-
ous menu by saying “Back”.
12.2.2 Saying voice commands
The available voice commands are shown in the
display. The device reads out the available
options. After that, a beep indicates that the
device is ready to accept your voice command.
Note:
When the device reads out the avail-
able options, you may interrupt it by
tapping 5. The beep sounds
immediately, and the device is ready to
accept your voice command.
Say the displayed command to select the corre-
sponding function, for instance, “navigate to
home” to start route guidance to the stored
home address.
Certain commands are combined with names or
numbers, e.g. “Call <number>”. Say the dis-
played command and the desired number or
name.
12.2.3 Opening the menu for an
operating mode
For each operating mode there is a separate
menu containing further commands.
To open the menu for an operating mode,
f say the corresponding command:
– “Phone”
– “Navigation”
– “Media”
12.2.4 Selecting from a list
If you have various items at your disposal they
will be displayed in a list (e.g. various navigation
destinations or various music tracks for media
playback).
Voice control