User's Manual Part 3

ManualsBrandsRobert Bosch Car Multimedia ManualsElectronicsCar radio & infotainment system

26 | en

f MAP 1.0

f PBAP 1.1

f SPP 1.1

f Vcards 2.1, 3.0

Opening the Select Bluetooth device menu

f Tap the direct-select button in the Home

menu.

or:

f Tap the Call area in the Home menu.

f Tap .

The Select Bluetooth device menu is displayed:

9101112

You will ﬁnd the following information and con-

trols in the Select Bluetooth device menu:

Note:

The currently connected device is

always the ﬁrst item in the device list.

8 Add device button: Start pairing a new

mobile phone

9 button: Delete a paired mobile phone

: Supported Bluetooth® functions of the

connection:

f : Telephone

f : Audio streaming

f : Telephone and audio streaming

; Bluetooth® name of the device

< Indication of Bluetooth® device type and

currently connected device:

f : Telephone

f : Audio streaming device

Pairing and connecting a mobile phone for the

ﬁrst time

f In the Select Bluetooth device menu, tap Add

device 8.

The device is now available for setting up a

connection (pairing). The Bluetooth® PIN of the

device is displayed. Next, please follow the

instructions provided by the device and your

mobile phone.

Notes:

f The Bluetooth® name of the device

is “Suzuki”.

f If 10 mobile phones are already

paired with the device, it will not be

possible to pair and connect a fur-

ther mobile phone. In this case, ﬁrst

delete one of the paired mobile

phones (see the section entitled

“Deleting a paired mobile phone”

(page 27)).

There are 3 methods of establishing a Blue-

tooth® connection. Please proceed according to

the method employed:

Note:

Please refer to your mobile phone’s

instruction manual for information on

how to set up a Bluetooth® connection

on your mobile phone.

f Method 1:

Perform the connection setup process on

your mobile phone. On your mobile phone,

enter the displayed PIN.

f Method 2:

The connection setup does not require you to

enter a PIN on the mobile phone. A notiﬁca-

tion appears in the display informing you that

the mobile phone wants to connect.

f Tap .

The rest of the connection setup process is

performed automatically. An appropriate

notiﬁcation appears in the display.

f Method 3:

Operation

Summary of content (9 pages)

PAGE 1
Operation 26 | en ff MAP ff PBAP ff SPP ff Vcards 1.0 1.1 1.1 2.1, 3.0 8 9 : Opening the Select Bluetooth device menu ff Tap the direct-select button in the Home menu. or: ff Tap the Call area in the Home menu. ff Tap .
PAGE 2
Operation The mobile phone receives the device’s PIN and displays it. ff Check that the mobile phone is displaying the correct PIN and then tap . ff Confirm on your mobile phone that you want to set up a connection. If connection setup was successful, the mobile phone will connect to the device. Notes: ff If the connection attempt fails, a notification is displayed. Make another attempt at setting up a connection from the mobile phone.
PAGE 3
Operation | FM/AM radio mode 28 | en Auto without a Bluetooth® connection. If there is no Bluetooth® connection established before you integrate a MirrorLink™ or Android Auto smartphone, you will have to establish the Bluetooth® connection manually (see the section entitled “Connecting a device via Bluetooth®” (page 25)). ff Smartphone integration via Apple CarPlay does not allow any parallel Bluetooth® connection.
PAGE 4
FM/AM radio mode E F G Frequency pointer Memory preset buttons button: Start scan function In memory bank FM-AST and AM-AST: button: Start autostore function) Note: The information displayed in the station information area @ depends on whether RDS is supported in your reception area or by the current station. 5.3 Calling up the tuner display While you are listening to the radio: ff Tap the Listen area in the Home menu. 5.
PAGE 5
FM/AM radio mode 30 | en 5.6 Tuning stations 5.6.1 Tuning stations manually ff Tap = or A once or several times to adjust the frequency incrementally. Or: ff Tap any position on the tuning scale D to set the corresponding frequency. Or: ff Touch the frequency pointer E and swipe left or right along the scale to adjust the frequency continuously. 5.6.2 Starting seek tuning ff Tap B or C to tune to the next or previous station in the reception area.
PAGE 6
FM/AM radio mode en | 31 5.10.1 Traffic announcement priority – on/off ff In radio mode, tap 6. ff Tap while the traffic announcement is playing. Note: Traffic announcement priority remains enabled. ff Tap Show radio text. Displaying of radio text is enabled when the check mark is displayed in the checkbox. ff Tap 6 to close the options display. 5.10 Traffic announcement Note: If the stations in your reception area do not support RDS, you will not be able to use these functions.
PAGE 7
DAB radio mode 32 | en 6 DAB radio mode Notes: ff This function is only available if the device supports DAB reception. ff DAB radio supports traffic announcement priority (please refer to the section entitled “Traffic announcement” (page 31)). 6.1 Listening to DAB ff Tap the direct-select button menu. 6.2 The DAB display 24 25 26 in the Home Note: You will also find the button in the display of the currently playing media. ff Tap the Radio tab, if necessary. ff Tap a DAB memory bank.
PAGE 8
DAB radio mode Notes: ff If available, the DAB service list also contains the secondary audio channel of services. ff The DAB service list shows all services that are receivable when the list is opened. The receivable services may change while the DAB service list is displayed. To update the DAB service list, tap the title “DAB service list”. 6.6 Selecting services ff Tap K or L to skip to the next or previous service. 6.7 Storing services 6.7.
PAGE 9
DAB radio mode | Playing media 34 | en To enable or disable the DAB PTY filter, ff tap DAB category filter. The DAB category filter is enabled when the check mark is displayed in the checkbox. ff Tap 6 to close the options display. Notes: ff If the DAB category filter is enabled, the PTY symbol is displayed in the DAB display. ff A service that is selected via the DAB category filter remains selected even if the DAB PTY filter is later disabled.