Installation Sheet

ManualsBrandsRobern ManualsLightingModular 30" x 19-1/4" Frameless Bathroom Mirror

Part no. 209-1361 10/07/2020

Modular Mirror

800.877.2376 www.robern.com

MODULAR MIRROR

Installation instructions - Save these instructions

TABLE OF CONTENTS

Tools Needed - 2

Parts - 2

Model Numbers - 2

Installing the Mirror - 3

Use and Maintainance - 6

Warranty - 6

CB-MODM1230FB

CB-MODM1630FB

CB-MODM2030FB

CB-MODM2430FB

CB-MODM1236FB

CB-MODM1636FB

CB-MODM2036FB

CB-MODM2436FB

CB-MODM1240FB

CB-MODM1640FB

CB-MODM2040FB

CB-MODM2440FB

This instruction sheet contains information on how to install a Modular Mirror. This product line comes in various sizes. Refer to specic

model numbers for dimensions.

Read the specic instruction for how your wall mirror will be mounted.

Save these instructions for future use and reference. An improper installation voids the warranty.

Carefully inspect the mirror for damage. Installed products cannot be returned.

If you experience any problems with your wall mirror, contact your dealer or Robern directly.

Limited Warranty — One Year Term

GENERAL INFORMATION

CB-MODM1230FP

CB-MODM1630FP

CB-MODM2030FP

CB-MODM2430FP

CB-MODM1236FP

CB-MODM1636FP

CB-MODM2036FP

CB-MODM2436FP

CB-MODM1240FP

CB-MODM1640FP

CB-MODM2040FP

CB-MODM2440FP

Summary of content (12 pages)

PAGE 1
MODULAR MIRROR Installation instructions - Save these instructions CB-MODM1230FP CB-MODM1630FP CB-MODM2030FP CB-MODM2430FP CB-MODM1230FB CB-MODM1630FB CB-MODM2030FB CB-MODM2430FB CB-MODM1236FP CB-MODM1636FP CB-MODM2036FP CB-MODM2436FP CB-MODM1236FB CB-MODM1636FB CB-MODM2036FB CB-MODM2436FB CB-MODM1240FP CB-MODM1640FP CB-MODM2040FP CB-MODM2440FP CB-MODM1240FB CB-MODM1640FB CB-MODM2040FB CB-MODM2440FB TABLE OF CONTENTS Tools Needed - 2 Parts - 2 Model Numbers - 2 Installing the Mirror - 3 Use and Maint
PAGE 2
TOOLS NEEDED 5/16” PARTS [216-1182] Hardware Bag [210-1484] (2) Mounting Brackets [203-1349] (5) Wall Anchors [SS674] (5) #10 x 2-1/2" Screws [SS164] (3) Washers [205-3135] (2) Lower Mounting Blocks Modular Mirror MODEL NUMBERS Use the chart below to identify your Modular Mirror model number. This chart references the model number for a 23-1/4" W x 30" H Mirror. Consult the Robern Price Book for a complete list of model numbers.
PAGE 3
INSTALLING THE MIRROR Note! Mounting Brackets [210-1484] must be mounted in structural frame members. 1. Carefully select the wall mirror location and mark the bottom and center line of the wall mirror on the wall with a pencil. 2. Determine the placement of the two supplied Mounting Brackets [210-1484] and Lower Mounting Blocks [205-3135]. 3. Install the two Mounting Brackets [210-1484] using two #10 screws [SS674] as shown. 2 W1 3 W1 [SS674] Screw H 3" W2 © 2020 Robern, Inc. 701 N. Wilson Ave.
PAGE 4
INSTALLING THE MIRROR 4A. Install the two Lower Mounting Blocks [205-3135] using the supplied washers [SS164] and #10 screws [SS674] as shown. Note: Supplied wall anchors [203-1349] may be used with Lower Mounting Blocks [205-3135] if a structural frame member is not available. 4A [SS164] Washer [SS674] Screw 4B. Wall Anchor instructions for Lower Mounting Blocks, if needed: 1. Drill a 5/16" hole into drywall/wallboard, tile, plaster, brick, or concrete. 2. Insert the wall anchor into the hole.
PAGE 5
INSTALLING THE MIRROR 5. Check that the mounting brackets are level. Adjust the brackets if necessary and tighten in place. 6. Tilting the bottom of the wall mirror out slightly, hang the mirror on the mounting brackets. If the mirror needs to be repositioned slightly, adjust the mounting bracket up or down until the mirror is level. 7. Press firmly on both sides of the wall mirror frame near the bottom until you hear audible "clicks", one for each side.
PAGE 6
CLEANING AND CARE NOTE: Under no circumstances should an ammonia-based cleaner be used on wall mirrors. When cleaning the mirror use only a lint-free polishing cloth. To remove stubborn stains, slightly dampen the cloth with water or rubbing alcohol. NOTE: Do not use abrasive cleansers on any part of the wall mirror.
PAGE 7
MIROIR MODULAIRE Instructions de sécurité importantes - Conservez ces instructions ESPEJO MODULAR Instrucciones importantes de seguridad - Guarde estas instrucciones CB-MODM1230FP CB-MODM1630FP CB-MODM2030FP CB-MODM2430FP CB-MODM1230FB CB-MODM1630FB CB-MODM2030FB CB-MODM2430FB CB-MODM1236FP CB-MODM1636FP CB-MODM2036FP CB-MODM2436FP CB-MODM1236FB CB-MODM1636FB CB-MODM2036FB CB-MODM2436FB CB-MODM1240FP CB-MODM1640FP CB-MODM2040FP CB-MODM2440FP CB-MODM1240FB CB-MODM1640FB CB-MODM2040FB CB-MODM2440FB
PAGE 8
OUTILS NÉCESSAIRES / HERRAMIENTAS NECESARIAS 5/16” PIÈCES / PIEZAS [216-1182] Matériel / Bolsa con componentes de montaje [210-1484] (2) Support de montage / Soporte de montaje [SS674] (5) #10 x 2-1/2" Vis / Tornillo [203-1349] (5) Fixation murale / Gancho para la pared [SS164] (3) Rondelle / Junta [205-3135] (2) Supports inférieurs / Bloques inferiores de montaje Miroir Modulaire / Espejo Modular NUMÉROS DE MODÈLE NÚMEROS DE MODELO Utilisez le tableau ci-dessous pour trouver le numéro de modèle
PAGE 9
INSTALLATION DU MIROIR INSTALACIÓN DEL ESPEJO Remarque! Les supports de montage supérieurs [210-1484] doivent être montés dans la structure du cadre. Nota! Los soportes de montaje superiores [210-1484] se deben montar sobre las piezas del marco estructural. 1. Choisissez avec soin l'emplacement du miroir mural et tracez la ligne inférieure et centrale du miroir mural sur le mur avec un crayon. 1.
PAGE 10
INSTALLATION DU MIROIR INSTALACIÓN DEL ESPEJO 4A. Installez les deux supports de montage inférieurs [2053135] à l'aide des rondelles [SS164] et des vis #10 [SS674] fournies, comme indiqué. 4A. Monte los dos bloques de montaje inferiores [205-3135] utilizando las arandelas incluidas [SS164] y los tornillos nº 10 [SS674] como se indica en la figura.
PAGE 11
INSTALACIÓN DEL ESPEJO INSTALACIÓN DEL ESPEJO 5. Vérifiez que les supports de montage sont à niveau. Réglez les supports si nécessaire et serrez-les fermement. 5. Compruebe que los soportes de montaje estén bien nivelados. Ajuste los soportes cuando así sea necesario y apriételos en su sitio correspondiente. 6. Basculez légèrement le bas du miroir vers l'extérieur et accrochez-le sur les supports de fixation.
PAGE 12
UTILISATION ET ENTRETIEN USO Y MANTENIMIENT REMARQUE : N'utilisez jamais un nettoyant à base d'ammoniac sur les miroirs muraux. NOTA: Bajo ninguna circunstancia deberá utilizar limpiadores con base de amoniaco en los espejos de pared. Pour le nettoyage le miroir, utilisez uniquement un chiffon de polissage non pelucheux. Pour éliminer les taches tenaces, humidifiez légèrement le chiffon avec de l'eau ou de l'alcool à friction.