Version1.3 Version 1.
Robin 100 LEDBeam (DayLight) Robin 100 LEDBeam (DayLight) Wireless DMX Table of contents 1. Safety instructions.......................................................................................................... 3 2. Fixture exterior view ...................................................................................................... 5 3. Installation....................................................................................................................... 6 3.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR ROBIN 100 LEDBeam ! Save it for future reference. This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
or dust. Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of the device and to protect it from overheating. Do not block the LEDs array with any object when the fixture is under operation. The openings should never be covered with cloth or other materials, and never must be blocked. This fixture should not be placed in a built-in installation unless proper ventilation is provided.
2.
3. Installation Fixtures must be installed by a Qualified electrician in accordance with all national and local electrical and construction codes and regulation. 3.1 Connection to the mains For protection from electric shock, the fixture must be earthed! The Robin 100 LEDBeam is equipped with auto-switching power supply that automatically adjusts to any 5060Hz AC power source from 100-240 Volts.
3.2 Installing the top hat Disconnect the fixture from mains before top hat installation 1. Go to the fixture menu and limit tilt movement (Pers --> Tilt Red--> On). 2.Put the top hat (1) on the head of the fixture (3) in such a way that both clips (2) of the top hat snap into cavities (4) in the head. Check that both clips are firmly egaged in the head cavities.
3.3 Installing the diffusion filter Disconnect the fixture from mains before diffusion filter installation 1. Insert two screws (1) into holder with diffusion filter (2) and secure them with securing washers (3) 2. Screw the holder (3) to the head via two screws (1).
3.4 Rigging the fixture The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
Rigging via omega holder: 1-Omega holder 2-Clamp 3-Trust 4-Attachment point 5-Safety chain When installing fixtures side-by-side, avoid illuminating one fixture with another! 10
3.5 DMX-512 connection The fixture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another.
3.6. Wireless DMX operation The external Robe Wireless CRMX-LB100 module allows receiving wireless DMX This device is equipped with the Lumen Radio CRMX module and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band. Robe Wireless CRMX-LB100 1 - 5-pin XLR (female) 2 - Locating pin 3 - Lock Push in the 5-pin XLR plug (1) into 5-pin XLR sockit (4) and simultaneously locating pin (2) into hole (5) in the fixture. In this way the wireless DMX module is connected with the fixture.
4. Control menu map Default settings=Bold print Level 1 Level 2 Level 3 DMXA Set DMXA 001-255 Info POn Time Total Level 4 Reset DMX In Pan 0-255 : Dimm F Temp 0-255 Current Highest High Res Sw Ver IC-1 IC-2 IC-3 Pers DMX Pres Mode 1 : Mode 6 Pan Rev On, Off Tilt Rev On, Off P/T Mode Speed Time P/T Feed On, Off Tilt Red On, Off Display Turn On/Off T On, Off Contrast 0-100% Backlight 0-100% BLC DMC On, Off Act BLC P/T Mov Mic Sens 0...10...
Level 1 Level 2 Level 3 Sta Alone Music T On, Off Level 4 Level 5 Auti Run Off Level 6 Prog 1 Step 1 Pan Prog 2 : : Prog 3 Step 40 F.Tim 0-25.5 S.Tim 0-25.
5.Robin 100 LEDBeam DayLight - DMX chart Version 1.0 Mode/Channel Value Function Type of control 1 2 3 4 5 6 1 1 1 1 1 1 0-255 Pan (8 bit) Pan movement by 450° proportional 2 2 2 2 2 2 0-255 Pan Fine (16 bit) Fine control of pan movement proportional 3 3 3 3 3 3 0-255 Tilt (8bit) Tilt movement by 300° proportional 4 4 4 4 4 4 0-255 Tilt fine (16 bit) Fine control of tilt movement proportional 0 5 5 5 5 5 5 6 6 6 6 6 P./T.
Mode/Channel 1 2 3 4 5 6 Value 0-7 8-15 13 7 10 7 - - - - 10 13 - 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-255 96-111 11 8 7 16 128-143 144-159 160-175 176-191 192-223 224-255 15 9 16 10 LED zone effects No function All LEDs ON step step Effect 1 Effect 2 Effect 3 Effect 4 Effect 5 Effect 6 Effect 7 Effect 8 Effect 9 Effect 10 Effect 11 Effect 12 Effect 13 Reserved step step step step step step step step step step step step step s
5.
6. Control menu The Robin 100 LEDBeam is equipped with 2-row LCD display which allows to set the fixture´s behaviour according to your needs, obtain information on its operation, test its various parts and lastly program it, if it has to be used in a stand-alone mode. Control panel: [ESCAPE] button used to leave the menu without saving changes. [NEXT] , [PREV] buttons for moving between menu items and for value adjusting.
6.3 Personality (Pers) DMX Pres - DMX preset. Use the menu to select desired channel mode. Mode 1 - 16 control channels Mode 2 - 10 control channels Mode 3 - 12 control channels Mode 4 - 9 control channels Mode 5 - 16 control channels Mode 6 - 18 control channels Pan Rev - Pan reverse. The item allows to invert pan movement. Tilt Rev - Tilt reverse. The item allows to invert tilt movement. P/T Mode - Pan and Tilt movement mode. Use this menu to set mode of the pan/tilt movement.
6.5 Test program (Test Prg) Use this menu to to run a special demo-test sequences without an external controller, which will show you some possibilities of using Robin 100 LEDBeam. Static - Static mode. This mode is suitable for projections on the wall, ceiling or ground without any head movement. Dynamic - Dynamic mode. This mode uses all Robin 100 LEDBeam functions including pan/tilt movement and therefore is good for a complete introduction of the fixture. 6.
RDM High - This menu item shows the second part of the RDM identification code. Wireless - Wireless DMX information. The menu allows to read some information about Wireless DMX operation Stat - Wireless status. Use the menu to read wireless DMX status. Unlink - use this item to unlink fixture from wireless DMX. Adjust - Adjustment. The menu allows the fine adjustment of effects. DMX Val- DMX values. Use the menu to set DMX values of fixture´s channels.
Note: In the case of an interruption of the upload process (e.g. power cut), the fixture keeps the updating mode and you have to repeat the software update again. 7. RDM This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and status monitoring.
Pan Err This message will appear after the reset of the fixture if the head´s magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head is not located in the default position after the reset. 9. Technical Specifications Electrical Power supply:.........................electronic auto-ranging Input voltage range:............... supply 100-240V, 50-60Hz Fuse:.......................................T 3.
Support of RDM (Remote Device Management) 6 DMX modes (16, 10, 12, 9, 16, 18 control channels) External Wireless DMX/RDM module (option) Compliance with USITT DMX-512 (1986 & 1990) and 512-A Full DMX fidelity and frame integrity Auto sensing of DMX frame rate and frame size <5ms DMX latency Operational frequency range of 2402-2480 MHz Producer: LumenRadio Connection DMX data in/out: Locking 5-pin XLR AC power input: Chassis connector Neutrik PowerCon, A-type, NAC3MPA AC pow
Wireles DMX module: Robe Wireless CRMX-LB100 Accessories Omega holder (P/N 99010420).......................
10.1 Replacing fuse 1.Replace the fuse by a fuse of the same type and rating only. Before replacing the fuse, unplug mains lead! 2. Remove the plastic covers of the base (3) by unscrewing 5 fastening screws (1) and (2) on each cover. 3. Unscrew four screws (4) on the top chassis (5). Lay down the fixture and unscrew four screws (6) on the bottom plate (9) to push out inside module of the base. 4. Unscrew two screws (8) on the bottom plate to remove rear panel of the fixture (7). 5.
11. Photometric diagrams 12. ChangeLog This section summarizes all types of changes in the user manual. Version of the manual Date of issue Description of changes 1.1 3/12/2012 Added chapter 3.6 Wireless DMX operation 1.2 17/1/2013 Added photometric diagram 1.3 27/01/2014 Change in the chapter "Installing diffusion filter" Specifications are subject to change without notice.