Version1.7 Version 1.
Robin 100 LEDBeam Robin 100 LEDBeam Wireless DMX Table of contents 1. Safety instructions.......................................................................................................... 3 2. Fixture exterior view ...................................................................................................... 5 3. Installation....................................................................................................................... 6 3.1 Connection to the mains....................
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR ROBIN 100 LEDBeam ! Save it for future reference. This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
or dust. Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of the device and to protect it from overheating. Do not block the LEDs array with any object when the fixture is under operation. The openings should never be covered with cloth or other materials, and never must be blocked. This fixture should not be placed in a built-in installation unless proper ventilation is provided.
2.
3. Installation Fixtures must be installed by a Qualified electrician in accordance with all national and local electrical and construction codes and regulation. 3.1 Connection to the mains For protection from electric shock, the fixture must be earthed! The Robin 100 LEDBeam is equipped with auto-switching power supply that automatically adjusts to any 5060Hz AC power source from 100-240 Volts.
3.2 Installing the top hat Disconnect the fixture from mains before top hat installation 1. Go to the fixture menu and limit tilt movement (Pers --> Tilt Red--> On). 2.Put the top hat (1) on the head of the fixture (3) in such a way that both clips (2) of the top hat snap into cavities (4) in the head. Check that both clips are firmly egaged in the head cavities.
3.3 Installing the diffusion filter Disconnect the fixture from mains before diffusion filter installation 1. Insert two screws (1) into holder with diffusion filter (2) and secure them with securing washers (3). 2. Screw the holder (3) to the head via two screws (1).
3.4 Rigging the fixture The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
Rigging via omega holder: 1-Omega holder 2-Clamp 3-Trust 4-Attachment point 5-Safety chain When installing fixtures side-by-side, avoid illuminating one fixture with another! 10
3.5 DMX-512 connection The fixture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another.
3.6. Wireless DMX operation The external Robe Wireless CRMX-LB100 module allows receiving wireless DMX. This device is equipped with the Lumen Radio CRMX module and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band. Robe Wireless CRMX-LB100 1 - 5-pin XLR (female) 2 - Locating pin 3 - Lock Push in the 5-pin XLR plug (1) into 5-pin XLR sockit (4) and simultaneously locating pin (2) into hole (5) in the fixture. In this way the wireless DMX module is connected with the fixture.
4.
Level 1 Level 2 Level 3 Sta Alone Music T On, Off Level 4 Level 5 Auti Run Off Level 6 Prog 1 Step 1 Pan Prog 2 : : Prog 3 Step 40 F.Tim 0-25.5 S.Tim 0-25.
5.Robin 100 LEDBeam - DMX chart Version 1.1 Mode/Channel Value Function Type of control 1 2 3 4 5 6 1 1 1 1 1 1 0-255 Pan (8 bit) Pan movement by 450° proportional 2 2 2 2 2 2 0-255 Pan Fine (16 bit) Fine control of pan movement proportional 3 3 3 3 3 3 0-255 Tilt (8bit) Tilt movement by 300° proportional 4 4 4 4 4 4 0-255 Tilt fine (16 bit) Fine control of tilt movement proportional 0 5 5 5 5 5 5 6 6 6 6 6 P./T. speed-set Speed Mode in menu: P./T.
Mode/Channel 1 2 3 4 5 6 Value 0-255 Function White (8 bit) - all zones If RGBW mode is selected: White colour saturation control coarse (0-100%) If CMY mode is selected: No function Type of control proportional - 13 10 - - - - 14 - - - - 0-255 White fine (16 bit) - all zones Fine white LEDs saturation control (RGBW mode) proportional 7 - - - 12 7 0-255 Red/Cyan (8 bit) - zone 1 Red LEDs saturation control (0-100%) proportional 8 - - - 13 8 0-255 Red/Cyan fine (16 bit
Mode/Channel 6 Value Function Type of control 1 2 3 4 5 27 - - - 32 27 0-255 Blue/Yellow (8 bit) zone 3 Blue LEDs saturation control (0-100%) proportional 28 - - - 33 28 0-255 Blue/Yellow fine (16 bit) zone 3 Fine blue LEDs saturation control proportional 0-255 29 - - - 34 29 30 - - - 35 30 0-255 10 31 0 1-255 31 15 11 - White (8 bit) zone 3 If RGBW mode is selected: White colour saturation control coarse (0-100%) If CMY mode is selected: No function White fine (16
Mode/Channel 1 2 3 4 5 6 Value 128-143 144-159 33 17 13 8 7 35 160-175 176-191 192-223 224-255 Function Shutter/Strobe Opening pulses in sequences from slow--> fast (All zones together) Closing pulses in sequences from fast--> slow (All zones together) Random strobe effect from slow--> fast (random zone) Random strobe effect from slow--> fast (random zone + random strobe) Random strobe effect from slow --> fast (All zones together) Shutter open Type of control proportional proportional propor
5.1 Virtual colour wheel - colour mixing chart Scale* Virtual Colour Wheel DMX 1-2 (White 2700K) 3 (White 2700K /Hal.mode/) 4-5 (White 3200K) 6 (White 3200K /Hal.
Robin 600 LED Wash - Virtual Colour Wheel Scale* Virtual Colour Wheel DMX 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 82 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 Red DMX 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 6 9 12 15 18 21 24 27 30 36 41 46 52 58 64 68 74 80 86 92 98 Page 2 20 Green DMX 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
Robin 600 LED Wash - Virtual Colour Wheel Scale* Virtual Colour Wheel DMX 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 Red DMX 104 110 119 129 138 147 156 165 174 183 192 201 210 219 228 240 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
Robin 600 LED Wash - Virtual Colour Wheel Scale* Virtual Colour Wheel DMX 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 Red DMX 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 246 237 228 219 210 201 192 183 174 165
Robin 600 LED Wash - Virtual Colour Wheel Scale* Virtual Colour Wheel DMX 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248-255 (Rainbow+ zone effects) Red DMX 129 119 110 104 98 91 84 77 70 63 56 49 42 35 28 21 14 7 0 **** * Colour scale as an illustration only 5.
6. Control menu The Robin 100 LEDBeam is equipped with 2-row LCD display which allows to set the fixture´s behaviour according to your needs, obtain information on its operation, test its various parts and lastly program it, if it has to be used in a stand-alone mode. Control panel: [ESCAPE] button used to leave the menu without saving changes. [NEXT] , [PREV] buttons for moving between menu items and for value adjusting.
6.3 Personality (Pers) DMX Pres - DMX preset. Use the menu to select desired channel mode. Mode 1 - 35 control channels Mode 2 - 19 control channels Mode 3 - 14 control channels Mode 4 - 9 control channels Mode 5 - 35 control channels Mode 6 - 37 control channels (equivalent to the LEDWash 300/600 in mode 1) Pan Rev - Pan reverse. The item allows to invert pan movement. Tilt Rev - Tilt reverse. The item allows to invert tilt movement. P/T Mode - Pan and Tilt movement mode.
6.4 Manual Control (Manual) Pres Eff - Preset effects. Use the menu to show preset positions of each channel effect. Manual C - Manual control. Use the menu to control all fixture channels by means of the control panel. 6.5 Test program (Test Prg) Use this menu to to run a special demo-test sequences without an external controller, which will show you some possibilities of using Robin 100 LEDBeam. Static - Static mode.
6.7 Reset This option enables the Robin 100 LEDBeam to index all effects and return to their standard positions. 6.8 Special functions (Special) RDM Low - This menu item shows the first part of the RDM identification code. RDM High - This menu item shows the second part of the RDM identification code. Wireless - Wireless DMX information. The menu allows to read some information about Wireless DMX operation Stat - Wireless status. Use the menu to read wireless DMX status.
yourself and ask for help your ROBE distributor. Note 2: DMX address, , programs 1-3 and all items in the menu "Pers" will be set to their default (factory) values after software update. To update software in the fixture: I. Installation of the update software. 1. Update Software available from the ROBE web site at WWW.robe.cz. 2. Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it. 3. Unpack the program to the directory. II.Fixture software updating. 1.
* SENSOR_VALUE DISPLAY_INVERT * * DISPLAY_LEVEL * * PAN_INVERT * * TILT_INVERT * * DEVICE_RESET * DMX_PERSONALITY * * DMX_PERSONALITY_DESCRIPTION * STATUS_MESSAGES * STATUS_ID_DESCRIPTION * DEVICE_HOURS * PARAMETER_DESCRIPTION * ROBE_DMX_INPUT * ROBE_WIRELESS_UNLINK * * 8. Error and information messages Short Err The message informs you that short circuit has occured on the LED PCB.
Strobe All LED zones together: Strobe effect with variable speed (0.3 - 20Hz) Random strobe pulse-effect with variable speed Opening/closing pulse effect with variable speed Independent strobe effect with variable speed (0.3 - 20Hz) at zones 2+3 Random strobe and random LED zone effect Dimmer Smooth dimmer from 0 - 100 % Pan/Tilt Control Max. pan movement range: 450° Max.
Total heat dissipation 680 BTU/h (calculated) Weight (net): 4.5 kg Dimensions (mm) Wireles DMX module: Robe Wireless CRMX-LB100 Accessories Omega holder (P/N 99010420).......................
10. ChangeLog This section summarizes all types of changes in the user manual. Version of the manual Date of issue Description of changes 1.3 15/5/2012 Added chapter "Installation of diffusion filters" 1.4 18/7/2012 Added photometric diagrams for diffusion filters 20°and 40° 1.5 3/12/2012 Added chapter 3.6 Wireless DMX operation 1.6 27/01/2014 Change in the chapter "Installing diffusion filter" 1.7 05/03/2014 Added 10° diffusion filter photometric diagram 11.
11.1 Replacing fuse 1.Replace the fuse by a fuse of the same type and rating only. Before replacing the fuse, unplug mains lead! 2. Remove the plastic covers of the base (3) by unscrewing 5 fastening screws (1) and (2) on each cover. 3. Unscrew four screws (4) on the top chassis (5). Lay down the fixture and unscrew four screws (6) on the bottom plate (9) to push out inside module of the base. 4. Unscrew two screws (8) on the bottom plate to remove rear panel of the fixture (7). 5.
12. Photometric diagrams Specifications are subject to change without notice.
